im sure that would have been worth mentioning if so
Posts by clarkydaz
-
-
Hi andy,
I bought close to a dozen amps yesterday, like them some are really great, , you eq'd separatly for srat, LP, Telecaster, but i noticed some that were in Pack2 or 3, you don't do that in the newer packs. I, for one like this feature. as i have LP, strats ....Were you Eq'ing at the amp before profiling for each guitar? or only on the Kemper? and if at the amp, is it possible to get those profiles !!!!the eq in the newer profiles is for strats/teles. if using humbuckers disable the eq.
-
you can usually find homemade ones on ebay
-
I'm running KPA - Matrix GT1500FXBD - 2 x Matrix CFR12. I also have the option of running to my 2x12 or 4x12 guitar cabs depending on the situation.
Pros
Lightweight
Flexible (FRFR, Amp/Cab or both at the same time Options)
Loud
Sounds AwesomeCons
None that I can think of off the top of my head
Spence
how are the matrix cfr12? im considering one. i already have the gm50, will it fit inside the cab?
-
cool, i built my own stereo switch from maplin parts. still looking for an exp pedal so ill check the yamaha out, sounds like it does the job.
-
gave them a quick run through. the fenders are a joy, id be happy with them alone. not sure what andy does but hope he keeps doing it, the bar keeps getting raised
-
Guess I am too late to the Helloween party
Can somebody confirm that the TGP thread in question was completely blocked or deleted?
people burning their own castles down. Best watched far away from a safe distance
-
+1
such a useful feature allround -
hi i bought the new vintage bundle this afternoon, yet the order still hasnt completed, its under review. is this normal?
-
It's just a lack of sync between it's LED's and the shutter/capture speed of his webcam, they're running at different frequencies so when one frame is captured the LED may be cycling off, the next frame it may be cycling on. You'd need a genlock device to sync it, or a better camera sensor would help to allow a longer exposure time per frame which would smooth things out a little.
al,the buttons dont usually flash together though, eg the amp/stack/eq/cab dont all blink -
whats with the kpa behind ck? looks like it will explode
-
Sorry if this has been asked before but is there any sound change to profiles with firmware updates?
the eq was changed a while back on the monitor out, more mid push. i actually use an earlier firmware as i prefer the sound
-
the metal sounds seem to be a winner in pack 3, any feedback on the other amps in the latest one?
-
there is a test the kpa gives itself where you push every single button on the panel, testing the leds etc. it ticks each button off one by one as you go through the process. its easy enough to do, ive done it a few times but dont recall which menu its in
-
just an observer in this, but if you are using high gain with high definiton etc isnt there a point where its so overloaded the sound will go into this kind of state, destabilize, etc?
-
try dialing the tone back to around 10 o clock. the stock tone at 12 is giving you extra bite
-
ahh the weekly pitchshifter request
-
sounds awesome, playing and tone. great job!
-
great, just some soundmen can be fussy and just give one. thanks CK
-
getting ready to use the kpa live, and just want to clarify do i need to send both main outs to the desk for the normal raw amp sound, or is one xlr sufficient? are both outputs just for stereo effects etc?
thanks