i´m using a 2X12 mesa boogie for profiling, what cabs do you have for the kemper ?
ok...so no fender vibroking-cab
, what do you mean by "what cabs do you have for the kemper"?
i´m using a 2X12 mesa boogie for profiling, what cabs do you have for the kemper ?
ok...so no fender vibroking-cab
, what do you mean by "what cabs do you have for the kemper"?
the link points to the dropbox loginpage...
thanx for the profiles...according to the tags, every amp seems to be profiled using a fender vibroking cab?? are they?
..loaded at the moment? I keep deleting "old" profiles as I add new ones, too keep the number down. have anyone reached the limit yet? do we know the amount of "memory" in the kpa?
Ok I just remembered I changed reverb and delay settings so maybe it only happens with the stock rig.
I'll reload it later and get back to you.
In the meantime... anyone else getting this?
Btw, if I activate an effect (say a lush reverb) the signal gets a tiny bit louder (maybe 2 or 3 db's). So naturally, if I take reverb off, the signal looses those couple of db's again. But this is not what you mean, right?
You really mean a noticable volume drop that stays for a couple of seconds and then noticably rises later, right?
yep, exactly....that was my first thought too, but then it wouldn't "normalize" itself, would it? no, I don't have a volume pedal connected. I'll try it with the pedal connected and see if that helps
nope, didn't change anything...strange
great info, thanx
same here...
nope, it's still there. the profile JCM slash is one of the profiles that has this.. seems to be only the reverb that does this. try this: switch off the reverb button on the jcm slash-profile while playing..the volume drops a bit and after 2-3 seconds it's back to normal again..weird
thanx, I did a system reset and now it's gone it appeared after I used the volumepedal for the first time, now I'll have to setup the vol.pedal again and see if it comes back...
can you guys try this?switch off the button for the fx-section when you have delay or reverb activated.. volume drops for about 2 seconds, then it returns to where it was... or is it only my unit
I'm not sure what i think about selling profiles. In one hand i think its just wrong and very bad for the kemper community i can see it putting off many potential new kemper owners. Then in the other hand i could see it a bit like selling IR,s like redwirez do but i am leaning towards the first view. It will be interesting to see what happens long term if this becomes the norm for people to sell them. What i do see as wrong is using the kemper forum to advertise them for sale. I very much doubt they can be Legally copyrighted
thanx for the update
thanx alot, these are my goto-cabs for all profiles when the original cab doesn't do the trick
great sounding profiles, thanx
when I turn the fx-button off, the volume drops a bit for about 2 seconds, then it returns to the previous level again. doesn't happen on every profile, but a lot of them. seems to help if I store the profile again efter turning it off (ie the rig is stored with fx off) if I turn it on again and then off, it doesn't change the volume. can anyone try this?
looking forward to hearing stairway...at 4am
a couple of silver-profiles would be much appreciated
thanx for an interesting shootout
Hi Uli,
Welcome to the official 'over 50s KPA club'.
Just you and I so far I think!
I'm not far behind you guys..rapidly closing in