Beside the Pedal Pitch and Pedal Vinyl Stop effects the PROFILER offers Harmonic Pitch and Chromatic Pitch. I suggest, your familiarize yourself and check out those. Detail descriptions can be found in the Main Manual.
Posts by Burkhard
-
-
You need to search for effect presets, not complete Rigs.
-
Presenting entire effect settings in the form factor of presets is more meaningful. If you press "Factory Presets" in System Settings of OS 6.0 missing effect presets will be added to your pool. This includes all presets related to the new delay and reverb algorithms introduces since 5.0.
-
I don't see a way. My concern is still, you are trying to create a more and more complicated solution without a convincing reasoning, why you cannot use the onboard pitch effects. Your "quality" statement in the other thread is a bit vague. Have you seen the responses from other users?
-
If you initiate Morphing via button the continuous controller of Morph Pedal (CC# 11) is not sent. CC# 11 is dedicated to a pedal.
-
-
Input Source is a global setting, which cannot be switched remotely. The front INPUT has the right of way anyhow as long as a jack is plugged in.
You would need to route the signal via an external device.
-
No, this is automatic latched/momentary behavior is not available for external analog switches.
-
It's always the last update…. No, the update doesn't change your output settings.
-
Whenever we add new effect algorithms we are usually publishing corresponding effect presets, too.
-
Be aware, that there are compatibility restrictions related to hardware, features and data. If somebody offers you old revisions, they should take full responsibility.
-
What does "not clear" exactly mean?
Are you aware of the Pedal Pitch options "Freeze Formants", "Smooth Chords, "Pure Tuning"?
-
-
I verified this issue and reported to our engineering.
-
-
Could you be more specific in terms of what you exactly mean by "quality". The Whammy will add latency for sure.
-
MIDI clock is a constant stream of "heartbeats" and therefor constantly overwrites your TAP and Beat Scanner entries.
-
According to the Whammy 5 manual, MIDI CC# 11 is available as a continuous controller. MIDI CC# 11 is used by our Morph Pedal.
If you activate "Pedals to MIDI" and set up your Whammy as an external device, moves of an expression pedal configured as Morph Pedal should control the pedal of your Whammy. You need to check that out. However, first I would check, if you can work with the pitch and pedal pitch effects the PROFILER has onboard.
-
We have three analog outputs which can be configured individually plus HEADPHONE OUT with Master Stereo signal plus SPDIF.
Parallel Path as an additional Output Source could be considered.
-
The MAIN OUTPUT is one logical stereo output. If you want to send dry and wet independently to FOH, you could use:
1. DIRECT OUT with Output Source "Stack".
2. MAIN OUTPUTS with Output Source "DLY/REV Wet". I guess, that makes more sense than Output Source "Master Mono".
3. MONITOR OUTPUT with Monitor Cab. Off to feed the guitar cabinet.