Ok, directly after downloading, i can set the stars
This means: download, test, 2. download, vote .....
Ok, directly after downloading, i can set the stars
This means: download, test, 2. download, vote .....
How can I vote ?
I just installed some new rigs from the sahring page, like 92 Matchless, MK50 d7, CORNFORD MK50, Dr z Maz and some others.
None of them are editable. If doubleclicking on any effect, nothing happens.
Are they locked and how can I unlock them?
Greets Ulrich
Aunt Edith: got it. In the system menu, page3, "direct edit" this was not marked !!!!!
Small eroor, big problem haha hoho hihi
Edit2: i was used to double click on any effect knob to turn on the editing mode. Now its holding it. No direct edit necessary .....every day something new.....arrggghhh
Step 1: checking the unit with the Idiot's Guide -> nothing happens
Step 2: installing the Editor, setting Pedals to CC7 and CC1 -> nothing happens
Step 3: returning this fucking unit to Thomann
Step 4: using again my MUSICOMLAB EFX MKIII
Have you followed this
http://www.behringer.com/assets/FCB1010_P0089_M_DE.pdf
Page 10, chapter 2.4.5
into detail?
Just askin'...
It has to work.
Yes.
Controler No. = 1 (for Volume)
Value 1 = 0
Value 2 = 127
nothing works !
But: page 14 (4.2.2): Control Change Messages says: Volume = Controler 07 .........what now (beside: 07 doesnt work either)
Ok, stock FCB.
Programm settings: Pedal B, MIDI Ch 1 (KPA is set to Omni), CC = 1, Values 0 - 127.
Nothing works !
I still remember years ago, when I was also totally fucked up programming the FCB ....
@DocLine6Forum: Thanks, I'll try it out.
Maybe we can write per email (in german). muelrich(at)yahoo(dot)de
stupid question but just to make sure....you have connected the MIDI OUT on the floorboard to the MIDI IN on the Kemper, right?
I think so as prgchanges are transmitted correctly.
OK, reading the reference Manual says:
The PEDAL 1 INPUT is routed to the wah stomp effects, as well as a few others, including the phasers and flangers. Pedal 2 represents the Volume Pedal that can be found in the RIG menu. You can configure both pedal inputs on page 3 of the SYSTEM menu.
But Page 3 of system menu is EMPTY.
So now for a trialanderror step by step.
Page 4: Pedals
Pedal 1 is set for switch mono FX-Mod
Pedal 2 is set for switch mono Tap.
This works for my Boss FS-6
The two switches above the display, which are named Pedal 1 Init and Pedal 2 Init are NOT lit and they have NO function at all !
Now lets try:
Pedal 1 is set for Expr. Type 1 Wahwah (what the fuck is the difference between Type 1 and Type 2 ???? No information bout that nowhere) and the second knob (Value) is set to 0. Turning this knob clockwise increases the "level". When hitting "Pedal 1 Init", the level is resetted to Zero.
No action with the pedals from my FCB.
Same thing with pedal 2 or Type 2.
Nothing happens.
Fucked upped reading the manual !
These completely insufficent manuals SUCK !
Hopefully its only the manuals. Without using exp-pedals, the KPA rocks
Press and hold ??? nothing happens
Press "System". ok. Page 4: pedals There are two switches Pedal 1 init and Pedal 2 init. When pressing, nothing happens !
The Kemper manual shoul have 500 pages, not 50 !
arrrgggghhhhhh !
Check the range of values as well
Sorry, this is not an information, i can use. I'm an old analog man
I need detailed "Handlungsanweisung", sorry (leo.org will help.) step by step instructon.
I just fumbles around. There was some kind of value management, but not Low - high .....sorry for beeing confused, some years with no MIDI...
Yesterday my Behringer FCB arrived. So now I'm managing Modulation Block on/off and TapTempo via Boss FS-6 and Programchanges via FCB.
BUT: the two exp-pedals won't work. Initially CC# for Pedal2 is 7, which means Volume, but nothing happens.
In the Kemper System menu I cannot find anything helpful .....*f.....*
I am not the guy who is checking out all the new rigs every day.
I'm really glad with the approximately 40 presets I use.
But once in a while I try some. And he're we go: Feck: thänx a lot. These Shiva Rigs are so amazing. There now within the 10-12 rigs I really use. Great job !
Like!!! Custom made?
Yes !
Some real cool rigs
You could even be facing this issue, if there are more than one consecutive blanks at the end of the rig name!
However - good news - 1.0.3 public beta just released can handle consecutive blanks. Please download from our web-page.
1. no doubke blanks at the end !
2. Installing beta *shock* no way !
When the preset-name contains two following blanks the midi assignments of that preset do not survive a reboot.
I don't think they have, but thanks, I'll check it.
Edit: just chekced it. 2 MIDI-assignments (from 55) were lost. The names were like: 005 JC Acoustic
F*$& ....
Sometimes after booting the KPA some of the rigs loose their MIDI progam number. PRGNR xy = Empty .
This bug has to be fixed !
Any Idea?
...
Tube Thomsen
...
Where? Gimme the link