Hi!
The last profile was terrible
I've uploaded a new profile of the amp and now it's balanced.
Saludos!
Hi!
The last profile was terrible
I've uploaded a new profile of the amp and now it's balanced.
Saludos!
Hi!
I've updated the Marshall profile.
It's called MARSHALL SV20 09:00.
Saludos!
My favorite Tweed Deluxe profiles!! Thank you very much.
I wanna give you guys an example. Here's a video from Rhett Shull playing a 5e3 Tweed Deluxe. In the opening seconds you can hear the guitar outside a mix. It sounds amazing to me.
P.S.: It might... just MIGHT also be his 3,500 $ Gretsch Falcon...
Are you using a Gretsch with similar pickups? The sound of those Filtertrons is unique and you can't get that sound with other type of pickups.
Hi,
I've just uploaded two profiles of a Marshall Studio Vintage to the Rig Exchange.
They sound like this with my LP. Just two chords and notes.
I hope you like them.
Saludos
A mi me pasa cada día!
Tu Interfaz de audio tiene activada la monitorización de la entrada en la que tienes el Kemper y, al activar al mismo tiempo la del DAW, suenan las dos al mismo tiempo y con desfase. Busca en el manual del interfaz de audio como desactivar la monitorización y ya lo tienes.
How do you connect the mic? You need a mic preamp with the stage.
thank you.
ribbon and 57 to mixer and balanced line from there to the Stage. I use to do the same with the toaster. I did hundred of profiles.
There is something different in the Stage. No matter what reference profile I choose, after volumen matching and profiling, the result is always low volume.
Hi,
I had two different Kemper Heads in the past and did many profiles and their volumen once finished were ok and similar to the commercial ones.
Now I'm profiling with my Stage and taking as a reference some commercial profiles, setting the input volume to match the reference profile and, after profiling, the resulting profile is always very low. I've checking every parameter in the resulting profile and comparing it to the commercial reference profile and there are no differences.
What am I missing? Thank you very much in advance.
Display MoreHey people!
I struggled with an unstable USB connection as well. Only my Stage, not my Powerhead.
I got lucky to establish a working connection when I tried another switching sequence:
1. RM app is open,
2. Stage is plugged in with USB-PC but is switched off,
3. Start Stage.
In my case the unit now was immediately recognised and I was prompted to do the update to 7.01 which worked flawlessly.
I know this is only a temporary workaround but it's with trying because there’s no risk in doing so.
Thank you very much! I'll try.
Sorry but for me it doesn‘t work. Profiler stage ist connected but no software update (software is up to date announcment) and it is a very unstable connection to my MacBook Pro. I tried it with different USB cables, installed RM 3 times new, credentials tested user name In RM and stage compared and so on...sometimes i get a connection sometimes not. My software version on profiler stage is 7.0.0_14807 from 09.07.2019. Till now i didn‘t had so much problems with a guitar processor and i had a lot. Don‘t know what to do. I‘m really a bit dissapointed.
I'm a bit disappointed too. I have two tickets open to support.
One because the connection between the Rig Manager disappears (not happening with my Powerhead and same computer).
A second one because the date and time configuration is missing from time to time when I boot with the Stage not connected to the computer.
Hi,
My Kemper Stage shows a Clock Setup Error when it boots and I must setup the date and time. I'm on 7.0.1.14853.
Doesn't happen when it's connected to the computer
Regards,
Paco
Hi,
When I try to use the Rig Manager beta compatible with the Profiler Stage I get a message "The USB connection in between your PROFILER and your computer is not stable. This might result in damaged or lost data".
No matter what cable or USB port on my Mac Mini I use I get the message.
I'm opening a ticket too.
Saludos!
Paco
Hi. Use a XLR to TRS cable. UA XLR input is the mic preamp while TRS 1/4’ is the line input. Sounds very different. I own an Apollo.
Klon
OD forma Bass
Hi!
It's been more than a year since I sold my first KPA and happy to be back.
Looking forward to discover what happened during the last year.
Saludos!
Paco
I would buy a Kemper floorboard. I own a Helix LT and factory presets are terrible... It sound very good after you learn to tweak it, but not as good as the KPA.