Perfect thanks
Posts by XpennoKPA
-
-
I do not have an MFC, but....is it not possible to program it to send ONLY the necessary #CC and #PC and cancel the rest? I would also choose a single midi channel instead of leaving the MFC in omni mode. Just my 2 c...
I set it to single midi channel and that didn't help, I disabled the the first 10 or so IAs as I don't use them, I will disable the other 20 or so and see if that helps.
Cheers
Spence
-
Ok, I'm confused. Can someone confirm or deny the following
Raised to the volume in the Amp section does not alter the tone, it just makes it louder.
-
I tried a factory reset on the mfc and it still crashes. Tomorrow I'm going to do a factory reset on the kpa and see if that's the problem. I've been through a few firmwares and never reset. Support mailed to say that they are looking at this as well.
-
Sounds superb!!!!
-
Does the amp volume affect the tone?! I though I read in the manual that it didn't and it wasn't like a power amp volume of an amp, did I get it wrong?
-
Some more midi-gear I own has problems with the MFC. The data-stream of the MFC is very full when you use the factory-settings. It is sending a seperate pc-command for every channel instead of sending one command on the omni-channel. Additional a stream of CCs follows. Even when you set the receiving gear to one special channel, the midi-in still has to read and filter the full stream wich is too much for some. The KPA works very stable with other midi-controllers. I'd recommend to ged rid of overfilled streams and delete all unneeded commands in some of the MFC presets and try if it works stable then.
Thanks for the info, I'll try a factory reset tonight and clear out as much as I can to see what happens.
Cheers
Spence
-
Thanks, good to know I'm not alone.
I've mailed Kemper a picture of the screen and description, look forward to hearing back from them
Spence
-
Hi there,
My KPA has been working flawlessly since I had it. Today I had a rehearsal and set up my Fractal MFC-101 to control the KPA (which was a breeze BTW!). Everything works as expected however I would say that every one in 5 program changes resulted in the KPA crashing. I've not had a crash from an IA change or from my wah etc.. only on program changes. I resulted to switching rigs manually in the end as the reboot time is so long.
I'll send support an email with the fault code but I just wondered if anyone had any tips on using the MFC with the KPA?
I'm running the latest FW on both units (1.0.3 beta on KPA) I have switched off AxeFX mode on the MFC. I've only switched the IAs that I use to global, not sure if I need to do this for all of them?
I'll probably do a factory reset on the controller and set it up from scratch when I get chance.
I hope that it's not booby trapped to crash the KPA!
Cheers
Spence
-
Nice one, can't wait to check it out!
-
This would be cool!
-
Welcome! Hope you enjoy
-
-
Welcome friend
Enjoy your new gear.
-
Spence: I'll keep you company. At least until midnight NY time.
Before i forget, could you please repost the Plexi profile that you used for your Soundcloud clip (which was awesome)?. I tried to download it from another thread but the link didn't work.
I'm going to try profiling a few amps this weekend as a test. Probably my Hiwatt Dr-504 and then my Gk250 ML. I'll keep everyone posted on results and will post if they are worthwhile.
Thanks man
Here is the post with the profile in, link is still working here.
If you don't have any luck then enable your PM and I'll send it over.
Spence
-
It will be good to get some US users soon, this forum gets lonely at night
Spence
-
Can we have a moderator erase this thread? It pisses me off, and I joined this forum thinking the opposite would happen.
Totally agree!
1. Internet Muscles
When someone tries to act all big and cool on the internet by posting offensive and rude posts and comments on forums, youtube, etc. Often done to attempt to feel good about one's sad pathetic lonely life.
We don't need this here or on any gear forum
-
Sweet, looking forward to getting home tonight
-
Xpenno: Do you realise a difference in the playing feeling between the two products (attack, sponginess, deepness)
They are both great products and both can achieve great tones. I currently find that KPA easier to tweak for my taste. The words you have used above are not words that I personally use to define guitar tone or feel so I can't comment directly I'm afraid.
-
One thing I will say is that there are are many more AxeFX II users out there than Kemper users. The AxeFX II has had the IR capture feature for a fair few months now and I've seen probably 2 or 3 people sharing them and the few that have been shared have not been to my taste. I've had my Kemper for 4 weeks and there are hundreds of Profiles out there, the majority of them sound great!
Spence