good to see the Freq Shifter in use!
it's a very cool, but rarely implemented effect.
good to see the Freq Shifter in use!
it's a very cool, but rarely implemented effect.
My green lunch box arrived yesterday so I've finally had a chance to try this. It's a very elegant solution and it works exactly as I hoped it would.
Also, I was afraid note tracking would be worse if you place the harmonizer after the amp stack (because the high gain signal is less 'clear') but it's perfect! Very impressive.
great!
glad you like it!
please post a recording.
thanks.
I always mic my amps off axis. Always.
the question is:
how does your amp -> cab -> mic -> Profiler -> monitors/speakers
sound compared to
Profiler (with profile of your setup) -> monitors/speakers
you have to take the sound of the amp makes in the room out of the equation. only the mic sound is of interest.
also, if you don't like the bump the SM57 has, maybe it's not the right mic for you.
nothing good can come from working against the sound of a mic. you choose a mic for it's properties, not regardless and try to eq that character out.
of that very particular high end signature at the KPA outputs?
let me be blunt:
The Profiler has no signature sound.
Many pros with 'golden ears' confirmed that the profile is sounding just like the amp fed into it, even analysers show that the high end is spot on.
I have good monitors here with very 'hi-res' speakers for the high frequencies - and I love the high end I'm getting.
So it seems you are either comparing amp in the room sound (often indirect and off-axis) with the miked sound (very direct, maybe even on axis)
or
maybe your speakers add something to the high end.
aren't your speakers meant to be used as live monitors/small PA?
live monitors are no substitute to studio monitors, and in my experience:
the better the speaker - the better the Profiler sounds.
please supply recordings of the issue you are experiencing.
main outs, unaltered by EQ, the signal you describe as 'fizzy'
I believe the panning is for the harmonized pitches though, not the dry signal.
not quite.
with the voice mix at -5 or +5 (only one voice), the stereo parameter moves the dry and the pitchshifted signal hard left/right in it's max (180°) setting and it reverses that effect at -180°.
with the voice mix at 0 (both pitchshifted voices are equally loud), the stereo parameter moves voice 1 and 2 from hard left to hard right (and vice versa) while keeping the dry signal in the middle.
it's a very simple, intuitive control.
hi robrecht.
Chromatic and Harmonic Pitch located in the X or MOD slots (post-amp) have a Stereo parameter since 2.0.1, which can be set from -180° to +180°.
It separates the voices nicely.
The Tremolo is pretty weak altogether IMHO. What it does is just modulating volume. A tremolo like in an old Fender on the other side would work by varying bias and that seems to have some side-effects other than just the volume going up and down.
not completely true, since AFAIK Fender incorporated three tremolo types: opto, bias and harmonic.
the one with the most side-effects was the harmonic one.
maybe this is about the 250?
I am coming from 2x12 tube amps (Marshall JVM, carvin legacy 1,3). I also have an ampeg vh150 solid state which has an amazing high distortion lead tone.
since you already seem to have a setup that works for you - profile it! (instead of trying to tweak other rigs)
this is the fastest way to get your sound from the Profiler.
once you familiarized yourself with the available parameters a little more, it's easy to edit other profiles according to your tastes.
I have one guitar set up with a EMG81.
This PU has a very strong output, is your Input LED turning red by any chance?
how long did you wait?
sometimes, after a FW update, it might take a while.
maybe they were still in your USB Sticks's 'Shared' folder when you imported new rigs?
did this happen to you or are you just asking?
Updating doesn't automatically add the Factory Content.
That's what the 'Factory Content' Soft-Button in the System menu, page 1 is for.
hi.
if this should happen again, could you please make a backup and contact support?
thanks.
Req acknowledged.
we're talking about this.
thread moved
good to hear it works again.
needless to say that this shouldn't happen and I never encountered such a behaviour.
I case it acts up again, please make a backup so our programmers can take a look at it.
thanks.
great, thanks!
I'll move this thread to the free profiles section and leave a link here.
nice!
here's the list as jpg
[Blocked Image: http://i40.photobucket.com/albums/e229/donelectro/Vollbildaufzeichnung24092013110002_zpsa6959632.jpg]