Posts by anot

hi,

easy job:
https://www.youtube.com/watch?v=gBF9MUsNUkQ

ao

hi,

http://forum.fractalaudio.com/…-version-10-00-stuff.html

"...
Implemented “Multi-point Iterative Matching and Impedance Correction” technology (MIMIC, TM, Patent Applied For) to amp models. MIMIC applies analytic signals to an amplifier and captures the fine nuances of each amp at various points in the circuit and corrects each model vs. its theoretical implementation.
..."

ao

hi,


CK talked about a: freescale DSP56/Symphony (Dual Core, equivalent 400MHz)
http://www.musotalk.de/video/c…des-kemper-profiling-amp/
8:55 ... ist doch garantiert ein 56tausender ... ja ... DualCore ...
http://www.guitar-muse.com/kemper-profiling-amp-2949-2949
9. Can you talk about...
The main DSP is a Freescale DSP (formerly Motorola) running at an equivalent of 400 MHz speed.

Samsung K4S281632K-UC75 - 128Mb K-die SDRAM
http://www.youtube.com/watch?v=RNDhwM0s03I#t=2m20s

DualCore (2x200 or 400MHz /MIPS ...) and SDRAM-Interface:
DSP56720 (2x 200MHz)
http://www.freescale.com/webap…SP56720&nodeId=0127959D9D
Dual DSP56300 cores for high performance
248K x 24-bit words RAM
External Memory Controller (EMC) provides for memory expansion to cost-effective SDRAM

Page 3 - Figure 4:
http://www.ti.com/general/docs…ber=sprabn8a&fileType=pdf


+NXP LPC2468
microcontroller around a 16-bit/32-bit ARM7TDMI-S CPU core - 72 MHz system clock rate
http://www.nxp.com/products/mi…c2400/series/LPC2468.html

ao

hi,

what about real time streaming in both directions (problem: latency?)

(as a specail service by Kemper?)

or offline profiling feature (advanced test signals + standard refining signals)

Armin

...

0 = Marshall only
10 = Fender only
...

why not:

3 = Marshall only
7= Fender only
?

(3->0)/(7->10): increases the differences

ao

Per

hi,

DSP56720 (this is a DSP56k!!! 56tausender!!!)
http://www.freescale.com/webap…SP56720&nodeId=0127959D9D [*]Dual DSP56300 cores for high performance [*]External Memory Controller (EMC) provides for memory expansion to cost-effective SDRAM
http://www.youtube.com/watch?v…Hi5w&index=1&feature=plcp
2:20
Samsung K4S281632K-UC75 - 128Mb K-die SDRAM [*]DSP56720: 144LQFP Package
The big chip on the right side is not 144pin...
(but the StarCores are BGA?)

http://www.freescale.com/files…ochure/BRDSPPARMETRIC.pdf
I cant find a DualCore (2x200 or 400MHz /MIPS ...) and SDRAM-Interface.

ao

hi,

http://www.musotalk.de/video/c…des-kemper-profiling-amp/
8:55 ... ist doch garantiert ein 56tausender ... ja ... DualCore ...

http://www.guitar-muse.com/kemper-profiling-amp-2949-2949
9. Can you talk about...
The main DSP is a Freescale DSP (formerly Motorola) running at an equivalent of 400 MHz speed.

Freescale DSP 56k Serie (200/250MHz 590/740)
http://www.freescale.com/webap…epage.jsp?code=563XXGPDSP

TigerSHARC TS201: 500MHz: 5330 - 600MHz: 6400 - IIRC AxeFWII 2x 600MHz

ao

hi,

IIRC CK talked about a: freescale DSP56/Symphony (Dual Core, equivalent 400MHz)

DSP56720 ??? (2x 200MHz)
http://www.freescale.com/webap…SP56720&nodeId=0127959D9D
16,15$ ???
http://de.futureelectronics.co…0%7c1%7c,Ny:True,Nea:True

all i can find (performance) is:
http://www.ti.com/general/docs…ber=sprabn8a&fileType=pdf

Axe FX II: 2x 6400 BDTImark2000
DSP56720: 2x 590 BDTImark2000

ao

hi,

so your KPA can automaticly download the new profiles from Rig Exchange

ao

hi,

and an automaticly created group "NEW" with the latest imported profiles.
(KPA switches automaticly to this group after import/reboot)
(from there you can move them to one or more of your groups, delete or keep for further checking)

ao

hi,

i'd like to see switching between two settings of one effect/stomp/(amp?):

1.) off <-> on (setting1) - as usual

2.) setting1 <-> setting2 - different gain/volume/feedback/mix ...

so you can also have boost (volume/gain) + more delay/reverb with one step

tschüss

5. Talent-Boooooooooost

Compare button (one of the soft-buttons):
to switch between actual (tweaked) Rig-settings and original (stored) or last snapshot of that Rig

storing a Cab:
please add an option to simple select the Name from one of the cab-tags

for "naming"
1. knob: ABC...
2. knob: abc..
3. knob: 123..
4. knob: -_()...

extra effect-block for Headphone-Output with:
- adjustable loudness-control -- http://en.wikipedia.org/wiki/Loudness
- room/early-reflection hall-effect -- http://www.toneboosters.com/tb-isone/
- crossfeed to get the sound "out of the head" -- http://www.hydrogenaudio.org/f…index.php?showtopic=90764
have a nice day

hi,

DigitalTube
"... but no matter how great any programmer is, if the engine doesn't have the power, there will be limitations in what you can do ..."

DSP56720 vs. ADSP-TS201S - Page 3
http://www.ti.com/lit/wp/sprabn8a/sprabn8a.pdf

ao

hi,
but what about Profile-Morphing?
ao