Welcome to the Forum Zero. I have 2 heads and find them great for portability and ease of use etc...
Posts by Robman
-
-
Can it be done globally though ?
-
Welcome to the Forum GK.If you are profiling yourself the KPA is an amazing instrument.I profiled a Fender early 70's Champ and had fun changing the Cab to a Rectifier 4x12 etc... and running the gain at levels way above what the amp could hit itself.
I would say that a bit of EQ and changing Cabs make a huge difference and are usually where I'd start.
-
I think a lot of it also to do with the profiled sound being A/B'd to an amp in the room when profiled.
You'll tweak the profile to sound like the amp sound in the room youre profiling in and a lot of it is dependant on the monitors, room acoustics too I would think. So, what might sound identical to the amp in the room might actually sound crap as a profile with a different guitar through different monitors in a different room etc....
Also add peoples ears and personal taste into the mix as well.
-
Display MoreHey there!
I’m a new Kemper user so bare with me as I’m still getting used to it. I’m trying to set up the harmonic pitch effect to mimic the end solo of Holy Diver by Killswitch Engage at 2:37 sec.
.Not only do I not know what I’m doing with the Kemper here but not that good with theory either. The song is played in what would be D minor but is tuned to Drop C. Any tips to getting the harmonising in the ballpark of that video?
Thanks!
You're playing Dm but guitar is in Drop C ( from E ) so that's 4 semi tones down.Dm becomes Bbm so you can probably set the harmoniser to Bbm/C# and try adding the 3rd above ( I think !!!! )
-
bought the Uber Bogner earlier today....Its GREAT! well done !
-
-
Let us know if you get it running ok
-
If its the same from different outputs then it must be an onboard thing like an effect or an EQ setting.
Anything to do with Routing ?
Also, maybe check the EQ setting as it might be defaulted to something non-flat.
-
Hi RoxS , welcome to the Forum!
The cable connection to the back of the KPA has always been an issue for me.Regularly at gigs my remote goes dead which is a real pain.
-
nice website Pierre !
-
Take a pic and open and send to support.
I've often had this and a simple re-boot tended to solve it.
-
I have a Scarlett , not a Clarett but ;
Make sure the SPDIF out is turned up on the KPA.
If it uses Mix control, make sure input is set to the spdif.
Also, make sure that the spdif out of the KPA is to the SPDIF in of the soundcard.
-
Welcome to the Forum.There are lots of good profiles floating around so just hook RM (Rig Manager) up to your KPA (Kemper) and start flicking through them on the RE ( Rig Exchange)
-
you can , but it wont last forever
-
Welcome ! Tone Junkies Twinery Verb is pretty cool and now free too I believe
-
I think this would be easier to see on stage
-
Ah, I have the 180 = 2x90
I have to crank all the outputs and the speakers I've tried, there's no way I could keep up with a drummer. Maybe mine's not working right...
are you playing death metal by any chance ?
-
I have one of those, and it is not loud at all for me.
Have tried 16ohm, and 8ohm, bridged and not.
Which one do you have, and what kind of cab?
I have the 360 which is 2 x 180w per side . I've used with a single cab and two cabs in stereo ( Rectifier 2x12,Cornford 2x12,EV & Martin Stage wedges etc... ) . It had plenty of grunt for my ears
-
I dunno, I'm not convinced by these...
I haven't used one but a band mate of mine had one that he used with his Helix.He ran his 2x12 Cab off it. It sounded good and volume definitely wasn't an issue
