Posts by ddyykk_hello

In my album you may also see the settings I use to profile, and my mic preamp and mics and guitar.

The design of this amp is an improvement of Orange TT, more gain, more treble and more punch. But different speaker used.

The profiles with ISO means using a isolation cabinet, with a speaker of V30. I can change it to Jensen JCH 12/70, if some one want the profile.

Although I think V30 is pretty good. When I do the profile, I keep the Door of the Iso Cab open, so the sound is not that boxy as it closed.

Sorry guys, I'm late . I was lazy, I thought nobody will notice that one, so i didn't update my post(My RIGs （Keep updating）).

The amp is a gift from the owner of the brand, I helped him do some recording job.

Here is the pic of the amp: http://sdrv.ms/1acwqf6 ( I am not sure if you can see it, if not, tell me.)

And the factory is really small, amps are cheap also. This amp's price is about $300. Here is the website:http://www.kingssz.com/en/prod…ss.asp?id=45&cid=00040001

I am still waiting……

March 27th UPDATE: Factory-Rig Referencelist with Amp/Cabinet/Mike-names
Here

My guess:

1-AMP
2-KPA
3-KPA
4-AMP

I think the Return port can handle the line level signal, so plug your soundcard to that and use a mono loop before the AMP stack.
It's just ok.

Thank you! DocLine6forum and HappyKemper

May I ask what is cabdriver ？

May be they should make it easy to install then a local dealer can do it.

Or DIY, then don't need to shiping.

May be you mean my rigs?

But that's not the problem at all, I mean the cab sim.

Do a test like this:

Profile a head or preamp with cab A. Then you have Rig A

Then profile the head or preamp with cab B. Then you have Rig B. Make sure this rig has nothing different with rig A but the cab.

And load the rig A, but use the cab of rig B (I guess that's easy for you). In this case I find rig A+cab B=rig B !

That means KPA is really amazing! It can totally isolate the cab from the rig, thus some people said if change the cab you'll happy.

So to your question: you want the raw E 530, you can just turn off the cab, there you go.

In case my ear is wrong, if you don't find they are same, I will profile the raw E530 for you.

so, how?

Quote from Vernon

IMHO one of the best plugins ever.
From the beginning many technicians have sampled tons of stellar hardware and made pro external libraries that fits almost every needs (consoles, preamps, eqs, compressors, reverbs, etc).

For the guitar side, this guy sells high quality preamps, amps and cabs libraries.

Vernon

Thanks for the review，I thought my thread has been deleted . It took me some time to find here.

http://www.soundonsound.com/sos/feb08/articles/nebula3.htm

A review from SOS.

Here is the link：http://www.acustica-audio.com/…article&id=112&Itemid=183
And here is the home page :http://www.acustica-audio.com/
A lot of funny stuff.

The tech they called “Nebula”，is kind of Dynamic Convolution，which can sample “EVERY” audio equipment：Preamp，EQ，Compressor，Reverb，Modulation，Guitar/Bass AMP etc. The plug-in come with hundreds of sample files, but most are EQ,Compressor,preamp, reverb,no guitar amp, but I believe it's easy to do when they like to. KPA don't open time-based effect sampling now, maybe later will ?

Or we could use this vst to profile KPA ? Wondering how does this vst sound, any users review?

very funny，thx。

How can i find this cabdriver？

The middle led of the tuner has gone……

I‘m worry the chicken head knob and other knobs, too.

Those 10 cabs are factory cabs. That's it.

Cab is a part of a rig.

Quote from billruppert

I wanted to explain what my profiles are all about:
Bill

1. Surf's Up
This is in response to people asking for a surf sound.
Its a GREAT emulation of a "spring reverb" and when the gain is cranked it becomes total punk surf guitar!
(If you get any clipping due a stronger pickup output just reduce the
volume control on the right till the master led is in the green and save)

2.Smashing Fuzz
This is a PERFECT profile of a fuzz like that used by Billy Corgan of the "Smashing Pumpkins".

3. Germanium Fuzz
This is a profile of a contemporary big selling germanium fuzz pedal.
Its sound is pure germanium!

4. Studio 15 4/12
This is a profile of an late 1980,s British amp I used on hundreds of sessions.
Its a small combo that uses 6V6 output tubes.
For this profile it is run through with a 4/12 cabinet.

5. Drive-Thru Speaker
Have you ever wondered what it would sound like if you could plug your
guitar into the drive-thru speaker system at your local fast food
hamburger restaurant?
Tthis is it!
Its a great for break downs in songs that totally Low-fi's your guitar sound.

Kay Model 703 1962:
This is a profile I made of a vintage amp I used when I recorded
with the late virtuoso blues harp player Jr. Wells.
It has a perfect dirty Chicago blues sound that the Kemper profiled exact!

Marshall Studio 15:
This is an small combo amp I used on hundreds of sessions.
It uses 6V6 output tubes and dc voltage on the tube filaments to keep ac hum at a minimum.

Fender Rhodes Piano and the Zeppelin Rhodes 2:
These are profiles I created to emulate the sound of an electric piano using just a electric guitar.

Kemper Banjo:
This profile will transform your electric guitar into the sound of banjo!
Its great for single lines as well as finger picked chords.

Display More

The banjo rig sounds more like a ukelele, strange,uh? It sounds more woody insteed of metallical that a banjo should do. I use a TELE and a Strat(With SSH pickup), any trick here? BTW, I never play a banjo, no idea how to play.

Amazing doc..

Thank you soooooooooooo much for your work!