To get a Blank effect slot scroll the type knob to the very begging there's a empty space there.
Posts by troynova
-
-
Its simple to do buy a second KPA and run firmware 1.5 for you base sound and use the other KPA for your effects sounds, all Effects sound are A LA CARTE per OS.
-
-
Hold pedal 9 down till led blinks then push pedal 7 to set it for delay.
-
UnO stands for "UnOfficial" firmware update for the Behringer FCB1010
-
I had the privilege to be there at the concert in San francisco on that friday night.
I was a Al di meola and John McLaughlin Fan and never heard of Paco de lucia till that show.
His playing that night almost made Al and Johns playing seem technical he had so...... much feel.........
and his right hand fingers are amazing to watch.Thank you for the Music Paco!
-
There really are only Rigs.
So yes you need to create a library of Rigs/AMPS specific to your needs.
And yes you must always Save Changes
Now you can take a blank performance slot and push the Amplifier button and select a AMP from there with the browse knob and build from there.
-
I would add also profiling per Guitar style's HUM/Single/hi output/low output.
-
In browse mode you have to assign one of the 128 midi MIDI # to a Rig
You do this by going to System page 5 MIDI PrgChg#
-
My guess is Leveling.
-
Ok if you also lock the volume it will be global.
on the same page 3
-
These setting will make it global
Ok if you also lock the volume it will be global.
-
You can disable tuner at volume pedal 0
push rig button go to page 3 set range to -4.9
-
I don't know where else to put this, so here's a RM feature request:
Arrange MIDI PrgChg# with two methods:
1. An "arrangeable" ordered MIDI PrgChg# list (i.e. a list in which the items can be moved by dragging or up, down, top, bottom buttons)
2. Add a MIDI PrgChg field to the Rig Inspector Tab. Insert by shifting out, or a smarter shuffling algorithm.Yes at least pull the midi program# info into rig manager
-
Don't overlook Bassman rig's or super reverbs for that cool fender sound.
Play with the gain and or add a distortion stomp.
-
System menu page 3 under the soft button's check box [] perf autoload.
-
In version 2.3 it now will change to slot one when you change performances.
-
Hopefully now that Kemper Has made it clear that development of a Editor is not coming,
that this opens a door for a individual or group will take on a commercial project to produce
this software.
-
-
This is not possible.BROWSE browses through presets, while TYPE actually shows the TYPE.
The Preset list is shared between all Stomp slots, so you can't match that back. Additionally, as soon as you change the type or go to a different rig, there is not necessarily a Preset to match the current Stomp setting.
The Type list of course (of course) does always match the current type.
Do you mean currently not possible ?
Using browse seem's like a easy direct way to setup a stomp.
I think other's might prefer to select a EFX type then select a preset of that EFX type with out having to scroll thru all other EFX type/preset's.