Sorry for stupid question, but if I buy two knob footswitch (something like this: http://www.thomann.de/fi/marshall_mrpedl91003_footswitch.htm) to use with Kemper switch 1 and 2, does led's work without battery? I would use adapter to make stereo to dual mono.
Posts by penatuna
-
-
Try Erik Stams legacy profiles.
-
-
1951 Gretsch Reg Lo was my favorite of these. I just added little slap echo and reverb for 50's sound. Nice profiles man
-
How about Matrix GT800FX or GT1000FX? They are both good, although i prefer GT800FX. They both are one rack size poweramps. I use Matrix with 2x12 EVM12L -cabinet. Also tried Matrix Q12A FRFR active cab, but that was not my cup of tea...
-
Is there latency only in performance mode, or with "normal" usage also? I have no problem with latency, but I don't use performance mode, just normal preset change.
-
I had Fender SCN's and DiMarzio Areas ('58 & '67) for years. They're both pretty good, but i liked Areas more. IMHO Areas are closer to a decent single coil, 'though they can be little too treble-heavy for some. All that said, nowadays i use Lollar Blondes in my HSS Strat (w/ Haussel VIN+ in bridge), and they are really good. They are also fairly silent for real SC's.
If money is not an option, i would probably opt for Ilitch Noise Cancelling System.
Merry Christmas to all.
Kemper fi,
Pentti
-
Do you have latest firmware? In first firmwares there were slight lag in switching, but with 2.2.1 there is no noticeable lag with Behringer FCB1010, unless you have something wrong with Behringer's programming.
-
Penatuna! In the middle, with a question mark: the KIPR file!!
Damn, I don't knw how I missed it... Thank you! -
ok, here you go:
http://foobazaar.com/kemper/vai-love-of-god/
I tried a bunch of TillS 1960's until I found a couple that were really close and I got tired. THAT'S A LOT OF CABS!!!! I settled on 019 and tweaked it just a tad to really get there. Then just some post EQ. I am not sure about the delay and verb settings, but they seem to work to me.
For the initial part of the clip I had the Space parameter in the Output settings on about 3. I thought I could get this out of the reverb, but it didn't match Vai's tone - I needed more space.
The rhythm tones at the end of the clip are with the compressor and delay turned off. For the Animal riff, I turn on slot B which is just a sub-octave.
Could you share this profile, please -
Spring reverb
-
I dig it. I wish I had some popcorn.
Thanks! I'll bring the snacks, if you'll bring the booze
-
Hi,
You can find our bands new demo thru following link: https://soundcloud.com/tnakari/the-government
All guitars played thru Kemper. Recorded, mixed and mastered by myself and our bands another guitarist at our rehearsal room and my home, so this recording is by no means pro quality. But i think you get the ideaWe appreciate any feedback!
-
I would love to have "Gain stack" or "Gain profiling". Let me explain what i mean:
You would take 5-10 profiles of same amp with different gain settings, and the KPA would make one profile out of those takes. That would essentially copy the amp's gain behaviour. "Gain Stacking" would mean that you could make only one or two profiles per amp. I don't like having 20-30 profiles of the same amp with different gain settings.I don't really need EQ-stack's, I think Kemper's EQ is pretty good as it is.
Other than that i only really need a "real" Spring reverb.
Kemper Fi,
-Pena-
-
Thanks for test!
-
Spring reverb...............
-
Have you tried "Pedal Init" in system menu?
-
+1
My thought also... DXR was little quieter on video or was it only my ears??? Also 10" vs. 12" could make difference when playing with same profiles and sounds. -
and put transpose before and after the amp...
Why do you need to do that? Just put transpose first in the chain or first after amp, not both. Or did I misunderstood you??
-
My CLR wedge is being shipped today. I plan an doing side by side tests with it and a Yamaha DXR10 and a Mackie DMX 12, before I make my final decision. I'll report back next week with my thoughts.
That's gonna be interesting. We'll waiting