Refloating this thread: anyone used the Kemper to record vocals connecting a microphone directly to the KPA?
Posts by xykhron
-
-
Frank, drop me a PM...I'm looking for one KPA.
-
Good work!
-
Thank you. After I sold my engl SE, I receive this Blackmore as partial payment, and before it was sold I wanted to profile it....now I'm completely out of tubes in my life, and I belong to the dark side, hahahahahaha
-
Hi again mates!
Added 8 profiles taken from an Engl E-650, Ritchie Blackmore signature model with a new cabinet, a Mesa Boogie 4x12 3/4 open back with Celestion Black Shadow C-90 speakers. The clean channel works better with single coil or neck pickup. HighGain channel profiles works good with an overdrive in front of the amp if you need more gainy sound. Also recommeded: add a graphic EQ before the amp, leave it flat and add 1.6-1.8 db output.
- ILM ENGL Blackmore01: Clean channel, Bass 10, Mids 4, Treble 4, Master 4
- ILM ENGL Blackmore02: Clean channel, Bass 5, Mids 3, Treble 5, Master 4
- ILM ENGL Blackmore03: Clean channel, Bass 6, Mids 5, Treble 8, Master 4
- ILM ENGL Blackmore04: HighGain channel, Bass 7, Mids 5, Treble 4, Master 4, Presence 6, Gain 9, Contour ON
- ILM ENGL Blackmore06: HighGain channel, Bass 7, Mids 3, Treble 4, Master 4, Presence 6, Gain 9, Contour OFF
- ILM ENGL Blackmore07: HighGain channel, Bass 6, Mids 5, Treble 6, Master 4, Presence 9, Gain 9, Contour ON
- ILM ENGL Blackmore08: HighGain channel, Bass 5, Mids 8, Treble 2.5, Master 4, Presence 9, Gain 7, Contour ON
- ILM ENGL Blackmore09: HighGain channel, Bass 5, Mids 8, Treble 2.5, Master 4, Presence 9, Gain 7, Contour OFF
-
Hi Björn!
Thank you!. I think it's a Marshall JVM model, that we fully customized with a different cabinet and parameters, as well as one graphic EQ and a overdrive pedal in front of it, so it's not on the Rig Exchange yet, but very soon will be, because I forget the USB stick with all the backup sounds at rehearsal/studio room, so I can't upload it right now. This week will go for it and then share.
-
I need it, I need it, I need it (repeat this as a mantra until Matrix poweramp is available, hehehehe)
-
Hi forummites!
Here I put you a sample of my brutal death project band's debut, a cover of Kreator "Pleasure to Kill" adapted to our style. Notice that this is only a raw recording: drums + guitar guide. Has no kind of post-processing, mastering, FX or whatever, just a guitar pluged into the KPA and direct to the PC soundcard input and to the DAW. Also, there's no bass, no double guitars and no vocals..we are working on those, hehehehehe
https://dl.dropbox.com/u/84783758/PleasureToKill-Cover.mp3
Enjoy!
-
nevermind that BS video.
another "axe vs kpa " poped up on youtube a few days ago showing the tone superiority of the kemper.
http://www.youtube.com/watch?v=OaoEx8CTDhkHey, that's my video!
-
Hi folks!
First of all thank you all. Much appreciated!
Here you have also another video, this time Axe FX II vs Kemper:
...and, I think in September will back to Kemper again, hehehehehehe
-
thanks for profiles,why sell the kemper?
Just got the Axe II and right now it fits better my needs...but my band mate will use the Kemper so I'll keep it under observation, hahahahaha
-
Added 3 Blackstar Series One 100 profiles to the rig exchange. All done in the Overdrive Super Crunch channel.
- ILM BLACKSTAR ONE 01: Gain 6.5, Bass 4, Mids 5, Treble 5, ISF 8, Resonance 6, Presence 4
- ILM BLACKSTAR ONE 02: Gain 8, Bass 7, Mids 5, Treble 5, ISF 8, Resonance 7, Presence 5
- ILM BLACKSTAR ONE 03: Gain 9, Bass 7, Mids 4, Treble 7, ISF 3, Resonance 7, Presence 7
Also, these one are my last profiles since I sold my Kemper this afternoon to my band mate. If he lets me borrow it, maybe I'll able to profile more amps....Enjoy them
-
Added 3 Blackstar Series One 100 profiles. All done in the Overdrive Super Crunch channel.
- ILM BLACKSTAR ONE 01: Gain 6.5, Bass 4, Mids 5, Treble 5, ISF 8, Resonance 6, Presence 4
- ILM BLACKSTAR ONE 02: Gain 8, Bass 7, Mids 5, Treble 5, ISF 8, Resonance 7, Presence 5
- ILM BLACKSTAR ONE 03: Gain 9, Bass 7, Mids 4, Treble 7, ISF 3, Resonance 7, Presence 7
Also, these one are my last profiles since I sold my Kemper this afternoon to my band mate. If he lets me borrow it, maybe I'll able to profile more amps....Enjoy them
-
great, thanks for the test!
-
And...how do you control the output volume?. Directly from KPA output knob?
It would be great that the KPA and the Matrix share the same power connection avoiding two cord plugs and also have a mono output option.... -
Why the hell?. Now that I'm just bought a GT800FX
Bruno, do you know when will be it available? -
Which JBLs exactly are those?
-
Try the Engls with the new GH12 cabs posted by Tills a couple of days ago. The combination is amazing!
-
Yes, I noticed that some of them had a lot of output. I think it will be due the interaction of EQ and tone shape buttons as Contour, MidEdge, MegaLow and Deep.
-
Thank you all!
By the way, any of you experimented such problems as described here with the last set of Engl profiles?
Weird high end rattle on some profiles????I'm worried about it.