Posts by xykhron

    New presets by Juanma Blanco are online (Diezel Herbert/ Krank Revolution)....


    To Juanma: If you read this, can you please give us more profiles of the Engl special edition?

    Hi!.


    Of course, no problem. What profiles do you want?. Clean, crunch, hi-gain?


    And yeah, 18 new profiles taken from Diezel Herbert in the 3 channels (and dual gain in channel) and a couple of Krank Revolution.

    Hi you all!


    I've just uploaded a bunch of profiles from Krank Revolution and Diezel Herbert.
    These were the settings:


    KRANK (cabinet: Krankenstein 4x12)..
    Channel Krank

    • Krank Rev01-1: Sweep 3.5, Presence 5, Bass 5, Mids 5, Treble 5, Gain 7
    • Krank Rev01-2: Sweep 2.5, Presence 6, Bass 5.5, Mids 5, Treble 7, Gain 7


    DIEZEL (cabinet: Mesa Boogie Rectifier 4x12).
    Channel 1 (clean):

    • DzlHerbert CH1-1: Treble 6, Mids 4, Bass 4.5
    • DzlHerbert CH1-2: Treble 10, Mids 1, Bass 5.5
    • DzlHerbert CH1-3: Treble 5, Mids 5, Bass 5. MidCut active. Intensity 5. Level 7


    Channel 2- (crunch)

    • DzlHerbert CH2-1: Gain 5.5, Treble 3.5, Mids 5, Bass 5.
    • DzlHerbert CH2-2: Gain 5.5, Treble 3.5, Mids 5, Bass 5. MidCut active. Intensity 5. Level 7
    • DzlHerbert CH2-3: Gain 4, Treble 5.5, Mids 4, Bass 5.5.
    • DzlHerbert CH2-4: Gain 4, Treble 5.5, Mids 4, Bass 5.5. MidCut active. Intensity 5. Level 7
    • DzlHerbert CH2-5: Gain 6.5, Treble 5, Mids 5, Bass 5.
    • DzlHerbert CH2-6: Gain 7, Treble 4, Mids 6, Bass 6.


    Channel 2+ (hi-gain):

    • DzlHerbert CH2-7: Gain 7, Treble 4, Mids 6, Bass 6. MidCut active. Intensity 5. Level 7
    • DzlHerbert CH2-8: Gain 7, Treble 3.5, Mids 9, Bass 6.5. MidCut active. Intensity 4. Level 7
    • DzlHerbert CH2-9: Gain 7, Treble 5, Mids 10, Bass 5. MidCut active. Intensity 5. Level 7
    • DzlHerbert CH2-10: Gain 6.5, Treble 4.5, Mids 4, Bass 4. MidCut active. Intensity 5. Level 7. Deep 5.5
    • DzlHerbert CH2-11: Gain 7, Treble 5, Mids 5, Bass 5. MidCut active. Intensity 7.5. Level 7. Deep 5.5


    Channel 3 (hi-gain):

    • DzlHerbert CH3-1: Gain 6, Treble 6.5, Mids 5.5, Bass 4. MidCut active. Intensity 5. Level 7. Deep 5.5
    • DzlHerbert CH3-2: Gain 6, Treble 4, Mids 4, Bass 5. MidCut active. Intensity 5. Level 7.
    • DzlHerbert CH3-3: Gain 6, Treble 4, Mids 4, Bass 5.
    • DzlHerbert CH3-4: Gain 7, Treble 3, Mids 7, Bass 6. MidCut active. Intensity 5. Level 7.


    All the profiles taken with Shure SM57


    Hope you'll enjoy them. In few days will capture and upload more: Bogner Uberschall, 5150 III, Dual Rectifier...


    You can find some ENGL Special Edition E670, Krank Revolution, Soldano HotRod 100+....just look for my name on rig exchange cloud: "Juanma Blanco"



    Edit: 2012 - July - 10


    New profiles added to the rig exchange:


    BOGNER UBERSCHALL
    Distortion channel


    • Bogner Uber 01: Presence 6, Treble 7, Mids 4.5, Bass 5, Gain 7. Mic on axis
    • Bogner Uber 02: Presence 5.5, Treble 7, Mids 4, Bass 6, Gain 7. Mic on axis
    • Bogner Uber 03: Presence 6, Treble 6.5, Mids 7, Bass 7, Gain 8. Mic on axis
    • Bogner Uber 04: Presence 7, Treble 7, Mids 3.5, Bass 7, Gain 8. Mic on axis
    • Bogner Uber 05: Presence 7, Treble 5, Mids 10, Bass 5, Gain 8. Mic on axis
    • Bogner Uber 06: Presence 8, Treble 5, Mids 5, Bass 5, Gain 8. Mic on axis
    • Bogner Uber 07: Presence 8, Treble 5, Mids 5, Bass 5, Gain 8. Mic off axis
    • Bogner Uber 08: Presence 7, Treble 5, Mids 10, Bass 5, Gain 8. Mic off axis
    • Bogner Uber 09: Presence 7, Treble 7, Mids 3.5, Bass 7, Gain 8. Mic off axis



    EVH 5150 III
    Channel #3


    • EVH 5150 III 01: Gain 7, Bass 6, mids 4, Treble 6, Presence 7. Mic off axis
    • EVH 5150 III 02: Gain 7, Bass 5, mids 5, Treble 5, Presence 7. Mic off axis
    • EVH 5150 III 03: Gain 8, Bass 6, mids 9, Treble 4, Presence 7. Mic off axis
    • EVH 5150 III 04: Gain 8, Bass 5.5, mids 5.5, Treble 5, Presence 7. Mic off axis
    • EVH 5150 III 05: Gain 6, Bass 8, mids 3, Treble 5, Presence 8. Mic off axis



    DUAL RECTIFIER (3 Channel version)
    Channel #3. Modern mode. Bold Mode. Diode Rectification.


    • MESA DUALRECT01: Treble 0, Mids 10, Bass 5, Gain 3.5, Presence 10. Mic off axis
    • MESA DUALRECT02: Treble 6, Mids 4, Bass 6, Gain 3.5, Presence 7. Mic off axis
    • MESA DUALRECT03: Treble 0, Mids 10, Bass 5, Gain 7, Presence 10. Mic off axis
    • MESA DUALRECT04: Treble 6, Mids 4, Bass 6, Gain 7, Presence 7. Mic off axis



    Also I've profiled my first bass amp, an EBS HD350 + Mesaboogie 2x12 bass cabinet. I don't know how good or bad will it sound. Sorry for the bass players if it's a shit :S




    EDIT: 2012, July 14th. Added 22 new Engl Special Edition E-670 profiles. All of them taken from my amp's channel 3 (Lead 1) in MODERN mode. Mic: Shure SM57 (mexican) slightly off axis. Cabinet: Mesa Boogie Rectifier 4x12 loaded with Celestion Vintage 30. The Engl has 6L6 powertubes.


    • ILM ENGL E670 01: Gain 6.5, Bass 4, Mids 4.5, Treble 4, Presence 7, HiGain On, Deep On
    • ILM ENGL E670 02: Gain 6.5, Bass 4, Mids 4.5, Treble 4, Presence 7, HiGain On, Deep On, Mega Low On
    • ILM ENGL E670 03: Gain 6.5, Bass 4, Mids 4.5, Treble 4, Presence 7, HiGain On, Deep On, Mega Low On, MidEdge On
    • ILM ENGL E670 04: Gain 6.5, Bass 4, Mids 4.5, Treble 4, Presence 7, HiGain On, Deep On, Mega Low On, MidEdge On, Contour On
    • ILM ENGL E670 05: Gain 6.5, Bass 6.5, Mids 3, Treble 4, Presence 7, HiGain On, Deep On, MidEdge On
    • ILM ENGL E670 06: Gain 6.5, Bass 6.5, Mids 3, Treble 4, Presence 9.5, HiGain On, Deep On, Mega Low On, MidEdge On
    • ILM ENGL E670 07: Gain 6.5, Bass 6.5, Mids 3, Treble 4, Presence 9.5, HiGain On, Deep On, Mega Low On, MidEdge On, Contour On
    • ILM ENGL E670 08: Gain 6.5, Bass 6.5, Mids 5, Treble 6.5, Presence 9.5, HiGain On, Deep On, Mega Low On
    • ILM ENGL E670 09: Gain 6.5, Bass 6.5, Mids 5, Treble 6.5, Presence 9.5, HiGain On, Deep On, Mega Low On, MidEdge On, Contour On
    • ILM ENGL E670 10: Gain 6.5, Bass 6.5, Mids 10, Treble 0, Presence 9.5, HiGain On, Deep On, MidEdge On
    • ILM ENGL E670 11: Gain 6.5, Bass 6.5, Mids 10, Treble 0, Presence 9.5, HiGain On, Deep On, MidEdge On, Contour On
    • ILM ENGL E670 12: Gain 6.5, Bass 6.5, Mids 10, Treble 0, Presence 9.5, HiGain On, Deep On, Mega Low On, MidEdge On, Contour On
    • ILM ENGL E670 13: Gain 6.5, Bass 10, Mids 6.5, Treble 3.5, Presence 9.5, HiGain On
    • ILM ENGL E670 14: Gain 6.5, Bass 10, Mids 6.5, Treble 3.5, Presence 9.5, HiGain On, Mega Low On
    • ILM ENGL E670 15: Gain 6.5, Bass 10, Mids 6.5, Treble 3.5, Presence 7, HiGain On, Mega Low On, MidEdge On
    • ILM ENGL E670 16: Gain 6.5, Bass 10, Mids 6.5, Treble 3.5, Presence 7, HiGain Off, Mega Low On, MidEdge On
    • ILM ENGL E670 17: Gain 10, Bass 10, Mids 6.5, Treble 3.5, Presence 7, HiGain Off, Mega Low On, MidEdge On
    • ILM ENGL E670 18: Gain 4, Bass 10, Mids 6.5, Treble 3.5, Presence 7, HiGain On, Mega Low On, MidEdge On
    • ILM ENGL E670 19: Gain 4, Bass 10, Mids 6.5, Treble 3.5, Presence 9.5, HiGain On, Mega Low On, MidEdge On
    • ILM ENGL E670 20: Gain 6.5, Bass 10, Mids 6.5, Treble 3.5, Presence 9.5, HiGain On, Deep On, Mega Low On, MidEdge On
    • ILM ENGL E670 21: Gain 6.5, Bass 10, Mids 5, Treble 3.5, Presence 9.5, HiGain On, Deep On, Contour On
    • ILM ENGL E670 22: Gain 6.5, Bass 10, Mids 4, Treble 4, Presence 9.5, HiGain On, Mega Low On, MidEdge On


    EDIT: August 1st:


    Added 3 Blackstar Series One 100 profiles. All done in the Overdrive Super Crunch channel.


    • ILM BLACKSTAR ONE 01: Gain 6.5, Bass 4, Mids 5, Treble 5, ISF 8, Resonance 6, Presence 4
    • ILM BLACKSTAR ONE 02: Gain 8, Bass 7, Mids 5, Treble 5, ISF 8, Resonance 7, Presence 5
    • ILM BLACKSTAR ONE 03: Gain 9, Bass 7, Mids 4, Treble 7, ISF 3, Resonance 7, Presence 7


    EDIT: September 11th:


    Added 8 profiles taken from an Engl E-650, Ritchie Blackmore signature model with a new cabinet, a Mesa Boogie 4x12 3/4 open back with Celestion Black Shadow C-90 speakers. The clean channel works better with single coil or neck pickup. HighGain channel profiles works good with an overdrive in front of the amp if you need more gainy sound. Also recommeded: add a graphic EQ before the amp, leave it flat and add 1.6-1.8 db output.

    • ILM ENGL Blackmore01: Clean channel, Bass 10, Mids 4, Treble 4, Master 4
    • ILM ENGL Blackmore02: Clean channel, Bass 5, Mids 3, Treble 5, Master 4
    • ILM ENGL Blackmore03: Clean channel, Bass 6, Mids 5, Treble 8, Master 4
    • ILM ENGL Blackmore04: HighGain channel, Bass 7, Mids 5, Treble 4, Master 4, Presence 6, Gain 9, Contour ON
    • ILM ENGL Blackmore06: HighGain channel, Bass 7, Mids 3, Treble 4, Master 4, Presence 6, Gain 9, Contour OFF
    • ILM ENGL Blackmore07: HighGain channel, Bass 6, Mids 5, Treble 6, Master 4, Presence 9, Gain 9, Contour ON
    • ILM ENGL Blackmore08: HighGain channel, Bass 5, Mids 8, Treble 2.5, Master 4, Presence 9, Gain 7, Contour ON
    • ILM ENGL Blackmore09: HighGain channel, Bass 5, Mids 8, Treble 2.5, Master 4, Presence 9, Gain 7, Contour OFF


    Hope you'll like them.

    That would be great,theres quite a few bogners on the exchange but not the uberschall .never tried one so lets hope someone comes up with the goods.

    I hope this weekend will have another profile session with a friend of me who will let me borrow some of his amps:
    Bogner Uberschall
    5150 III
    Dual Rectifier (3 channel version)
    Marshall JCM900
    Blackstar HT100
    Mesa Triaxis
    Mesa Formula Pre
    Mesa V-Twin
    Brunetti 101


    but I think I'll try only the Bogner, 5150 III and Dual Recto. Maybe I can profile a modded CAE 3+SE, but it's not sure.
    Also, I've in mind during this week make new and better profiles from my bands mate Krank Rev and Diezel Herbert as well as new Engl SE (I see you liked some of my other Engl ones...).


    Unfortunately I'm able only to profile them using a (chinese I suposse!) Shure SM57.

    What a great week its been for those of us in the Hi-gain Division of the Kemper army(Kemper everyday),first we had a great set of Metallica eq matched profiles from silentundergroundstudio,then a superb collection of Engls and Peaveys from Juanma Blanco,also a nice CAE ch3 from bruno and now i"ve just seen an avalanche of Diezel Herberts has crashed in from r.u.sirius.Big thanks to all of you for freely sharing your work :thumbup: .


    Those Diezels sound great!!!

    That's cool explanation! :thumbup:

    I have dialed in great Djent tones with my Kemper. Secret is a good OD pedal before the Kemper.. amazingly enough just like a good amp. I have a TC Electronics Booster/Line driver and it combined with almost any high gain profile = DJENT

    For more djent-like tone and certain amps you can dial the tone faster using Metal DS stomp. Works very good with passive thick sounding PUs that use to enhance the low-mid and low frecuencies as BKP Warpig or Holydiver. With brighter PUs such as EMG 81 or S.D.Pearly Gates it doesn't react as good, but in combination with StudioEQ you can achieve a very very good sound

    fast delete & restoration?


    Push the Softbutton One (top left button above the display) while you switch on the KPA and keep pushing until a message appears 'Mainetenance Mode'. As soon as the unit has started please push the Maintenance button, then the Memory button, and the Init Flash. This will clean-up the internal flash memory. Afterwards shut down and start again. There should be no rigs on your unit right now. Now you can restore factory rigs and which will bring your KPA into its initial state or import some from the USB pendrive 8)



    got this info from support...

    Plus or less the same as my monitor out EQ. I noticed that with that extra mids shift the becomes more tube-like through all the SS poweramps I tried...

    No, I don't bother at all. I was just curious about how much storage capacity has this thing, so I was trying to force the unit to its limits and see where it goes....I'm really using 5 different sounds only....It would be great to know specs of the machine as the manual is a complete shit.

    Hi forumites!


    I've just uploaded some profiles made this afternoon at one studio:
    - Soldano HotRod 100+, distortion channel
    - Peavey 5150 distorsion channel (one profile is with my cab and another one swapped to one Tills cab that sounds better for low tunings bass response)
    - Fender Supersonic, burn channel, optimized for neck PU.


    Also I made my own "frankenprofile" with one head and one cabinet and name to sound as the channel 4, modern mode of a Mesa Boogie Roadking but with the EQ settings I used to play with when owned this amp a year ago.


    These ones join the ones created some days ago: Engl SE (CH1 & CH3) and Diezel Herbert (CH3).


    Hope you'll enjoy them.