Posts by posneg

Would love try these, have a show next Tuesday opening for dead horse trauma. Currently using the tweaked version of the triple, thanks!

I am in, would love to try it. I always thought the Triple had sweeter mids than the dual.

Made some SansAmp GT2 Profiles tonight, let me know what you think on Rig Exchange and here are Dropbox Links. All on Off Axis

GT2 Brit Clean

GT2 Brit Hi Gain

GT2 Cali Hot Gain

GT2 Tweed Clean

Enjoy!

First profile share - thought I would start small HA!!, now everyone can have a 600 watt(if you have the powered Kemper) Marshall MS-2 and another MS-2 with a Bad Monkey overdriving the input. They actually turned out better than I thought they would, sounds like a Marshall with hardly any bass. Have fun with it, let me know what you think... Can be downloaded from Rig Manager or DropBox links.

DropBox MS-2 Profile

DropBox MS-2 Profile + BadMonkey

[Blocked Image: https://k5pthg-dm2305.files.1drv.com/y3mwtNdI2A8LsTEUtkqp63e8ZSY3cZkKo0ORowgZccryP6l-T4QY1IwryfGVz4YHj-5Uhy-npnF57uyrVMqgOSNX9oOCnk4IE69mCwRwbmfDZhtkTP5wA4FWn7mAFIehUT_7o_syyaqgy9vS_V6qenR3Wv2n1T2mndPJE0iSQ9FRBI?width=256&height=192&cropmode=none][Blocked Image: https://ljpthg-dm2305.files.1drv.com/y3m4zvtXDICbV_pgfDzegnWBBomL40yHagyfkuVQ2_hO7kGX8uU3axAaZ6VAXXHy0aBngyJj2RNfSmvrb_-Y_9Uu7bpbIV_fM6Knda7c8deTDsEJk0gEbaFoJ5wK-fK4SOBbeOyxT2GoO_5uxzEwb3Acf2vdqYtboInzgCcyyV4Tkc?width=192&height=256&cropmode=none][Blocked Image: https://kzpthg-dm2305.files.1drv.com/y3mMkx_fAx-9EnVQYPhf12kTbAOWTDX9-gPO_cTXYcNqBChsyejS5AklrrMMqkj2a9nfgfY4XGM1q8DUotirPJEQN75JnNwjuxOC447zxV82b6e7TjF56BhTd7XPHcUjJvkV5VV2lu_g6hn1pHpn_mcxD4H-K7Q5iqY_DaJxDprvSc?width=256&height=192&cropmode=none]

Hello, did you sell the Kemper remote yet?

Duh, sorry!
[email protected]

I would like to try the Criminal and Benzin.

Thanks!

I filled out a support ticket and pointed to the pic in this thread. This is the resolution that they sent back to me. I haven't tried it yet, sounds like it would fix a corrupt rig by initializing it. Has anyone run into a rig that consistently crashes the profiler when it loads and you have to initialize it? Or maybe it just loaded funky and had errors through the rig manager? If this fixes it I will probably initialize, save the patch then copy back into the rig manager library. The funny thing is it is the CRUNCH default patch after a OS upgrade.

Please try to start the Profiler into Browse
mode while pressing down the RIG button until you see "Initialising
current rig" in the display and let me know if that fixes your issue.

So... ++ Christoph ++11 = Kemper Profiler = Bad Ass x 10.

Knew about that, I looked there first. You cannot upload pictures through the "send us an email" form.

Quote from paults

posneg

Here is where to contact Support:

https://www.kemper-amps.com/contact

Using latest Rig Manger for OSX, Kemper loaded latest Firmware release. Going through My Profiler rigs folder towards the bottom in Rig Manager and clicked on a Rig and got and got an error on the Kemper screen. Said to contact support, so here it is, hope it helps.... attached is a screenshot of the error. Interesting, I might be wrong but I didn't know that the Kemper OS is written in some incarnation of C++

Thanks

See the attached video. I was in browser mode then clicked on my footswitch which is the ring on # 2 switch and when switched - strobe mode is all black and just shows the cents on the bottom, click on bubble tuner then back to strobe it is ok. Press the footswitch again to switch the tuner off with ring on #2 footswitch and the strobe part stays on the screen. I did this several time son the video. The only fix is to switch the main switch from browser to tuner then back to browser.
here is a link to the video - https://youtu.be/Mw61dKKXf-Q

Sorry if this has been covered before but on the Rack Profiler is there a way to keep the values of the 4 knobs under the screen(Bass Middle Treble Presence) visible in performance mode? I know the Toaster version has lights around the knobs to accomplish this all the time. I have to turn the knob slightly to see the values, it usually changes the value of the one I moved (when I only want to see the value), then it goes back to the labels. Is there a setting to have the label and value show up above the knobs in performance mode(like browse mode)? Or a button to push to see the values?

thanks!