I have the plexi profiles from Armin. It took a while to find the right one, but his Plexi is one of my main tones I use for gigs. Bright and cutting! But not harsh!
Posts by sb
-
-
You should definetely update to the latest firmware.
I am starting to think it might be the "new/different midi cable I started using recently.. It's a Monster brand cable and seems to be quality, but it also seems to not "seat" correctly in the midi port on the Kemper, It does not seem to insert as far as the other midi cable does. Would/could a bad midi cable connection cause the unit to freeze? Hope it was just a bad connection issue.
Btw. I am updating tonight! Downloading RM and updating both of the Kempers!
-
What pedal are you using?
Which firmware are you running?
Is the pedal connected with two MIDI cables?
In order to better analyze the problem i would like to ask you to open a ticket at our support page and send me a backup of your Profiler so i can try to recreate the situation.
I would also need a midifile that contains recordings of your footpedal that provoke the problem.axess mfc5 for midi pedal. 2.0.1.8601 for firmware.. I gig a lot so I struggle to find the time to update. (1) One Midi cable. I will get the other information you requested asap.
I think I mis-spoke in my original post. It's not when I turned the midi pedal on, it was when I went to switch profiles/rig for a lead boost or something.
-
I have had my Kemper freeze up two times now (at gigs) when switching with my midi pedal. It was NOT the same patch both times either. When I went to switch on the pedal, the KPA just froze up and sound muted completely. I have used the same pedal for two years with no issues.
Any ideas?
Thanks
-
-
I cannot locate these.. Help?
-
The DXR is good, thanks! Is the Wha OK?
-
Great and trustworthy seller here!
-
I snagged an new unpowered rack last month for $1688! Prices jumped a week or so later!
-
I should have it fixed now
-
It will be fine. You should go out of the mains to FOH and and pick up a SS power amp, If you have $950 you can get the Matrix brand... I do not care for the Kemper as much through a regular guitar cab, If you are using "direct out" recorded profiles it will be better..I say you haul around a "prop" cab for looks and use a powered FRFR speaker to get the best sound possible on stage, or go with in ears..
Just my opinion. You will be fine either way, I just really enjoy not hauling around large heavy speaker cabs and heads anymore, and still getting as good or better sound at gigs.
Atomic sells a more "normal" looking frfr cab.
-
pm sent
-
I have a Yamaha dxr10 that sounds awesome with the KPA, but I honestly feel like since I switched from the QSC to the Yamaha I can feel a bit of latency. Am I the only one? Am I crazy?
-
Pete, Are these profiles the same the the BE profiles you put out last year?
-
Bogner 20th xtc profile (red) bogner Shiva lead. Amp Factory Friedman BE.. All of these are killer lead tones.
-
I cannot understand how these profiles got by without anyone mentioning them.. The red channel profile is killing it for leads. It may replace my Shiva profile I have been using.
Thanks Thomas!
-
I had the lag in switching problem and still do when using certain rigs. The best I could come up with is that it happens when I would use certain rigs in a combination (like one clean rig and one distortion rig for a particular song) Most of my presets switch very fast without much lag, but there are a couple that have huge amounts of lag time. I will post some examples later today. I have eliminated most of my issues as of now, but I had to setup some rigs a little different to get by.
-
Bogner XTC 20th profiles By Thomas Kruck are VERY nice. I own an XTC 20th and they seem to get very close..
-
Jrr shop. He has a post in this section. Great prices on new units
-
I have been using Pete's profiles (Marshall, Cameron) for a long time and I just recently started using the Bogner Shiva that R.U serious posted. The Drive profile seems work in a LOT of different situations.
I don't know if it's "Marshally" enough for you, but I dig the hell out of it. All of the Shiva profiles work very well.