Working fine now, but is it normal that you hear the recorded sounds in the DAW on the computer only in the phone out of the kemper? in playback I'm experiencing some cracklings in the audio also... Would it be possible to select for example the realtec in the DAW output range? Now you can only choose "profiler" I can monitor the recording when I choose another "audio system" in the audio device settings...
Posts by krikke
-
-
the setup is very simple. Connect the Profiler to your Mac with a USB Printer style cable,
Is it correct that the cable used to connect the kemper to the computer for rig manager, also is used for USB audio? Or do I need a USB A to USB A cable and connect the USB port that is used to update the kemper?
-
Thanks a 1000 times!!!
-
I'm a bit embarrassed to ask here, but is it possible to copy a profile in 1 of the 5 performance slots to the Kemper in browse mode?
I just can't seem to get this to a good end.
If you click on 1 "profile" in performance on the right, and choose "export", you can, for example, "paste" it on your desktop, and then copy it in the rig manager in the kemper.
However, the profile you have in browse mode has no effects, nor does it sound like the one you copied... Bizarre...
I ask this because, when you put a profile from the Kemper database into a performance and then make quite a few adjustments to it in terms of sound and effects, it would also be useful if you saved it in the Kemper browse mode...
Am I missing something?
Greetings!
Chris.
-
Thanks for the answers!
I will activate the PAD -12dB, but how do I set up the volume to be sure that the signal is ok for the FOH?
-3dB? -8dB?
Ruefus, I'm very curious about the 4 situations...
-
Hello Guys, For years I used the volume in the "output" menu to adjust the stereo Kemper signal to the FOH.
It was set on -15dB, just too be sure that it was not to hot for the mixing console...
Today I found the "PAD-12dB" button in the output menu.
What is the use for this button?
In my Kemper it was activated, so while my "volume" was on -15dB, the "PAD-12dB" shaved off another 12dB...
So the master output was on -27dB...
Now I know the reason I had to adjust the input gain L&R on the USB interface...
I don't understand the use of this button...
Is it for people who's volume at home is on 0dB and activate the PAD when gigging?
Who makes me smarter?
-
Porcupine tree... Of the new day...
-
-
Welcome!
-
Maybe you will not believe it, but the whole family here sang along, and listened to your beautiful lead...
?
-
All Presets/My Profiler
? thanks Mr Paults!
-
The editor is awsome!
Is it possible to load an own saved effect preset?
I can not see those wich are saved in the toaster...
-
Nice profiles! Thanks!
-
-
-
These are ESP Eclipse I ...
They have active EMG pups, and sound great (for me...) for playing metal... and clean...
The action is set up low, and the weight is reasonable...
When you see a 2nd hand... buy it!
-
I bought a beautyiful sister for Blacky...
-
-
Opeth - Svekets prins ?
-
that's correct! Same here...
If I put in on "all rigs" and back to "favorites, only the "favorites" are shown... like after the update "all rigs" is active while " favorites" is displayed...
Little bug...