One click to start, another to end.
And, doing that with precision is the essence of the Art of Looping 
Posts by paults
-
-
If you have the Double Tracker in the Delay or Reverb Slot, you can use "Mod Mono" as the Output Source for the Monitor Output. (Note: your Monitor will not contain any effects in the Reverb or Delay Slots).
-
When recording a loop with ANY looper that does not let you pre-define the length of the loop, you need to define the end of the loop by pressing the footswitch a second time. If you simply stop playing, silence will be recorded until the looper reaches the end of available time.
-
You will need to connect your Rack or Toaster to a Wifi Router.
-
Rig Manager Version 1.2.1 for iPhone connects with a Profiler using Wifi.
-
Everything posted in the Rig Exchange folder in Rig Manager is a free Profile, by the rules of The Rig Exchange.
If you rate them in the Rig Exchange folder, yes.
-
I use a mixture and even use I of Paults , in my live setup
I'm glad something I did is useful for you
-
can we get our ears on your own profiles ?
On The Rig Exchange - search for “paults”.
My signature includes a link to a SoundCloud playlist of demos of many of them. -
When I first bought my Profiler in 2013, there was only one person offering Commercial Rigs for sale. A second soon followed, and then many more. I have since bought many Rigs from many sources, to use when recording genre-specific music intended for film/tv/commercial use.
Most of the sounds I use live are Profiles of my own Marshall and Fender amps, Factory Content Rigs, several favorites from the Rig Exchange, and Commercial Rigs. My main gig has been being in the same band since before I bought the Profiler, and I'm still using most of those same rigs from the 20teens.
So, another tip comes to mind: Those older Rigs on the Rig Exchange are still worth a listen
-
Even the earliest Factory Content included third party Rigs. A large number of the current Factory Profiles are third party Rigs. And, almost all of the Rigs in the Factory Rig Packs are third party Profiles.
-
What guitar/pickup?
-
Have you tried Pedal Links in System Settings?
With the existing pedal links logic, I use a single pedal for Wah, Pitch, and Morph. I use rig-specific settings to use Morph to control things like Delay mix and feedback, Tremolo depth, Volume, etc.
-
This will require boring holes in the guitar which I can’t be bothered with at the moment.
Can you use push/pull pots to get your preferred combinations?
-
When you power up the Stage, and switch to Rig Mode, the last Rig you used when it was turned off will be loaded. When you switch to Performance Mode, the last Performance Slot you used will be loaded.
-
Can you give an example of your definition of this type of pedal? Tubescreamer (tube in name only), Butler Tube Driver (an actual tube, but run at reduced voltage),a full-voltage tube preamp, something else?
-
If you are looking for something in particular in the manual, remember the PDF can be searched
-
Welcome!
-
Why not just get the original one -- Gibson P90 if you want a P90?
P90 pickups require a different shaped hole in the guitar.
-
If you install four push/pull potentiometers, P-Rails would be very versatile.
if you just want the sound of P-90s, I have heard good things about Duncan Phat Cats
-
