They aren't for sale in the shop, just as a gift with purchase. I'll send them a begging email. ?
There is a merchandise category in the official shop. There you can order the T-shirts for EUR 24,38.
They aren't for sale in the shop, just as a gift with purchase. I'll send them a begging email. ?
There is a merchandise category in the official shop. There you can order the T-shirts for EUR 24,38.
There are Shirts in the Shop.
Sorry rickymaina,
I don't want to disturb your thread any further and I don't want to promote my product here.
Please keep in mind that this is a community of interests and not a marketing forum. And that's why I love this forum. Here you get help, constructive criticism and good tips.
My display glass were created by an intrinsenal community in this Forum in 2018 ... I just wanted to make constructive criticisms. Because mistakes do not have to be made twice.
I don't need to test your product, because is exactly the same. With the glue layer shown, the plate is not dustproof and acrylic glass is unfortunately not scratch-resistant.
But I wish you good luck!
Tom
Protection glass and acrylic plates (plexiglas is a brand-name) are two different things for two different scenarios.
SKEEN is a special protective glass for music gear that has a very strong scratch protection and the strength of hard glass, cause it is glass, but is much more flexible and remains the touch-sensitivity. This makes it less fragile and does not splinter. There is also an additional anti-fingerprint and anti-dust coating. There is no „Rainbow-Effect“, too. Due to the structure of the glass, the display remains razor-sharp and maybe even better. That is SKEEN.
We also had a SKEEN Pro version made of laser-cut 2mm acrylic plates and a dustproof, padded adhesive layer for the display frame. Due to the low demand, we have stopped the production. But there are still remaining stocks for the Kemper for 9,90 €. If you are interested, you can send me a PM.
But I would like to emphasize that this protection does not offer any protection against scratches. Of course, it protects the display from hard mechanical impacts, but the scratches on the acrylic plate makes it difficult for the display to stay razor-sharp.
The rickymaina idea is great , but it has many disadvantages. Especially the dust under the plate and the scratches on the plate.
I think that SKEEN + SKEEN Pro is the perfect solution for Rock'n'Roll.
Falls noch Bedarf sein sollte, die Panzerglasfolien können ab dem 01.12. über die neue Seite bestellt werden:
SKEEN - Screen Protection Glas
Nochmals vielen Dank an alle für das positive Feedback!
Here is my latest Guitar. It is a DIY Strat:
- Warmoth Body: Alder/Flame Maple
- Fender Neck: Roasted Maple
- Häussel Pick Ups
Das Aufbohren bei der Tremolofräsung der Floyd Rose Strat würde ich nur einen erfahrenen Gitarrenbauer machen lassen, da die Hülse dort direkt an der Fräskante sitzt. Wenn eine Hülse nur rutscht, würde ich diesen Aufwand auch nicht betreiben.
Mein Gitarrenbauer hatte mir damals gesagt, dass man das Loch etwas befeuchten soll, damit die Holzfasern etwas aufquellen. Nach dem Austrocken reicht es, die Hülse mit einem geeigneten Kleber zu fixieren.
Ich habe das damals mit Alcon 10 von Beko gemacht. Damit muss man aber wirklich vorsichtig sein.
Es gibt aber auch gute 2k Kleber von den üblichen Firmen. Damit sollte das auch bombenfest werden.
Wenn die Hülsen locker sind, bekommst du weder die Saitenlage noch die Stimmung vernünftig in den Griff. Eigentlich sollte die Hülse bündig mit dem Holz abschließen. Ich hatte mal eine Richie Sambora Strat, bei der waren nach einigen Jahren auch die Hülsen locker. Ich hatte das damals geklebt, da man die Hülsen i. d. R. nur tauscht, wenn man ein anderes Tremolo-System installieren möchte.
Wenn die Hülsen wieder in Ordnung sind, musst du die Gitarre zwangsweise neu einstellen.
Man kann das natürlich aufwendig erneuern, so dass neue Gewindehülsen wieder richtig fest sitzen. Dazu sind aber Holzarbeiten notwendig.
Ich denke, ich würde mir einen passenden Kleber suchen. Das Problem ist dann aber, dass sich die Gewindehülsen u. U. nicht mehr so ohne weiteres entfernen lassen, falls das mal notwendig sein sollte.
How are the dimensions of the plate on the back?
Doesn't have the PS-170 a fan?
As far as I know, the PS-170 is build with the ICEpower 50ASX2 BTL module.
For that, the price is very high, even if the build quality is great.
I'd go with the larger module, the ICEPOWER ICE125ASX2 BTL.
Mooer Micro Preamp Live + Line6 HX FX
or
Line6 HX Stomp
or
Hughes & Kettner Black Spirit 200 Floor
Yes, it is the ICEPOWER ICE125ASX2 with DSP, but you do not need the DSP.
Hallo zusammen,
ich habe gerstern etwas mit Midi herumgespielt und wollte eine Yamaha Clickstation über Midi mit dem Kemper synchronisieren. Leider ohne Erfolg
Im Kemper habe ich unter System die Midi Clock aktiviert und auch im Rig das Tempo aktiviert. Wenn ich den Midi out Port über z. B. Poket Midi am PC messe, kommen auch Werte an, allerdings andere als z. B. von Ableton oder Cubase. Mit einer DAW funktiniert es auch, nur nicht mit dem Kemper.
Würde mich freuen, wenn mir jemand weiterhelfen könnt.
LG Tom
How about the Laney IRT112?
That's exactly the reason, according to Ruefus.
The price of course depends on the quantity.
The pure electronics (ICE Board, balanced Modul, Switch Power Supply and POE Board) costs about 200,- €.
I have to find out, where we can have cables assembled.
The metal plate varies between 30 - 50,- €, depending on whether it should be painted, etc.