Just a reminder...the sale continues through tonight (EST U.S. time)...don't miss out!
If you have purchased any of the profiles, would love to hear some clips or see some videos!
Just a reminder...the sale continues through tonight (EST U.S. time)...don't miss out!
If you have purchased any of the profiles, would love to hear some clips or see some videos!
Our friend Richard was kind enough to use one of A/M Audio's Budda SD80 profiles for this cool pickup shootout for Bareknuckles....hearing the different pickups using the same profile is really cool. Many kudos to Richard!
Due to overwhelming response, our black friday sale is being extended through the end of November. Take advantage of getting 50% off your purchase by using code: TURKEY at A/M Audio Profiles!
Thank you to everyone that was generous enough to purchase our profiles...we hope you like them as much as we do.
A/M Audio Profiles
http://www.amaudioprofiles.com
EVH pack here. Can't wait to give those a whirl!! Thanks Rich.
Thnaks! Easily my favorite profiles to use whether recording or playing live.
Decided to start the sale a little early...have at it!
Code does not work!!
Sorry if there was any confusion...black friday starts on friday...so midnight tonight in the U.S. Thanks guys!
Check out the following:
http://amaudioprofiles.com/marshall
Both amps are there and there's a 50% black friday sale starting midnight tonight. There's plenty of sound clips too. Make sure to join the email list for a free pack!
It's that time of year again! Download "Winter In New England" for free! Are you a fan of Trans Siberian Orchestra? you may dig this tune. Thanks to my brothers from other mothers, Eddie LaValle and Alessandro Del Vecchio for their help and talent on this one. Enjoy!
Guitars recorded with Kemper
http://richardantonelli.com/store
Save 50%!!!
Beginning Thanksgiving night at midnight, use code TURKEY to receive 50% off an order you place at A/M Audio Profiles! Don't wait long because the sale ends when black friday ends...friday night/midnight. Any profile pack, bundle or a combination of packs and bundles will be 50% off. Now's the time to grab that profile you've been wanting to try out!
As always, we would love to hear your experiences using our profiles. Let us know what you think! We also love hearing any recordings you may have done with our packs or bundles.
A/M Audio would like to say Happy Thanksgiving to each and every one of you and your families. Thank you for your continued support.
A/M Audio Profiles
http://www.amaudioprofiles.com
OK, so it's my Kemper! But I spot it in this video!
My band played a cool venue at Patriot Place (Gillette Stadium) in Foxboro, MA this past weekend. Here's a tune...kemper direct to FOH.
As requested...see first post for profiles alone...
Display MoreHey
Could you please describe the 8 profiles ?
All clean ? All crunchy ? Dirty ? Heavy ? Pedal boosted ? Speaker profiled ?
Thanks,
Ben
Sure Ben
They are labeled 1-8. No pedals were used...it's all amp and the speakers were the stock celestion branded Bad Cat speaker. (More info here: http://www.badcatamps.com/blog…ad-cat-celestion-speaker/) It's the 2x12 combo.
#'s 1-4 are channel 1. They go from clean to a mid gain + if that makes sense. Nothing like death metal...but a good rocking tone on number 4.
Profiles 5,6 and 7 are channel 2 and go from a mid gain up to a heavier gain...as much as we could get out of the amp without it farting out.
Profile 8 is actually jumpered. We went from one input to the other with a short cable which basically hot rods the amp in a subtle way. So profile 8 has the most gain/sizzle.
Hope this helps! I'm going to do a sound clip of all 8 at some point...hopefully soon but this combo really surprised me with how full it sounded.
Hi friends!
We are excited to announce that our Bad Cat Black Cat 30r studio pack is now available to check out and purchase at our site (link below)! There are a couple of sample clips of how the profiles sit in a mix (very well!) and we should be adding a raw sample clip at some point soon too!
This studio pack contains 8 profiles and is ready to go! Head on over and have a listen! Once again, we thank you for your continued support!
A/M Audio Profiles
http://www.amaudioprofiles.com
I've added the 2 sound clip links here if you'd rather click those...thanks!
https://bandzoogle.com/tracks/161626/544555535/920502.html
https://bandzoogle.com/tracks/161626/3265430725/920550.html
This is just the guitar recorded alone...some simple riffs of all 8 profiles:
https://bandzoogle.com/tracks/161626/1834339003/921167.html
Figured it out! system menu...looper should be set to post...
Hey guys...tried to search for this but didn't find anything here so forgive me if it's already been answered...
When I first got my remote months ago, I tried the looper function and from what I remember, I was able to record a loop with one rig and then go to another rig and play over the loop with a different sound. For some reason, I can't do that anymore. Everything I try now affects the loop that's playing, whether it be the tone, the delay, drive, boost, etc...the loop becomes the rig I switch to.
I haven't tried the looper in awhile but were there any changes made since the beginning? I'm on the current firmware and it's been like this for a couple of updates now...I just forgot to come here and ask about it. I know I was able to do it before because I remember distinctly showing my bandmates this feature...
Veterans Day Sale!
Use code: THANKUVETS to receive 20% off your order for any item on our site...today only! We here at A/M Audio Profiles salute all the past, present and future armed forces for all that you do for our country...thank you!
A/M Audio Profiles
http://www.amaudioprofiles.com
A/M Audio will be having a pretty good black friday sale...be on the lookout.
Sad to read this...Best of luck to you Andy and many thanks for the help you gave me with profiling. A few of your profiles were the first commercial profiles I purchased when I had my first go-round with the kemper.