Posts by digbob

Hallo
ein Zoom MS 70 CDR wäre abzugeben, Prima Multi FX , Reverb, Delay, Chorus und vieles mehr,
Bei Interesse PN

i think "my rig" is the first rig which stays always in the kpa, the first ever made by CK
and when theres no other rig in your KPA, which i assume, the kpa tried to store
your rig after switching it on again and didn't found it
cause you loaded it only from RM and didnt saved it

Kemper direct via Mon out in die DXR
Zum Mischpult über die Main Outs
so kannst du deinen monitor getrennt vom FOH Mix regeln

Hi
i have the same issue here with the RM manual Pictures
Im on Mac OS X latest version

im not sure but i think i got a similar Problem,
from time to time , when i don't use the pedal which is in Pedal input 6
and setup up for Volume Control, and then will use it again
it simply didn't work, i did not switch off the KPA or change anything
it seems it simply forget what it should do when it is not used
maybe when your pedal was down it stays with volume off
and after a while the pedal is simply not seen by the KPA anymore
thats why you got no sound
i aleas hace to go to the setup page change randomly some settings , then move the pedal
then its there again
will check today when the pedal is in off position and the pedal is "lost" by the kpa
if the vol stays at zero when moving the pedal

thanks to all
bought it

yeah thought about this
but its so hard for me shipping it back
do find you find the sound of the fx from the H9 better than the KPA FX ?
I have the feeling the H9 sounds fuller and warmer

Hi all
question is i have a H9 Max here, inserted it in Loop from KPA
and im blown away, it sounds outstanding with the KPA.
Now i ask myself is it really in need to buy it, when the New 4 Version comes
Delays are there and we could hope for more Reverbs this year.
But i find the Sound of the H9 is soo good
don't know what decision to make
Andy help

i think his goal is to get attention in the guitar and amp community
we should stop talking about him, cause he knows nothing
thats the best to stop this foolish charade

sorry but this vid and the arrogant guy is just boring
i don't like people showing their big cars
and the same with this video setup
thousands of dollars in amps
and the only intent is that he wants to show us what he owns

use the remote for the first one
and from the first to the second patch a midi connection
means kpa 1 midi out to kpa2 midi in
assign the midi cc`s to each rig and when you switch the remote the second follows via midi

do you have the uno chip for kph
or the orig. chip in the fab ?

sorry but i have to say this "test" is unprofessional
like Phil Lynott says
"don't believe a word"
i mean believe your ears
when it sounds good it is good
and the kemper sounds more than good

its very important to use ambience miss in the mix to get a natural feeling
in the sound
x 32 is def capable to get a good i.e. mix sound, don't believe when people say its a behringer
this can't be good
def its a good desk for the money with all possibilities to get a good i.e. sound
as said before the molds you use must be good
in the lower range try shure 315 or UE triple fi

ok great
thought the remote reads the resistance from the pot
so its safe to try fro me ?

thanks
and you think its no problem to plug an active unit to the remote jacks
Cause normally i think the way is that the remote just reads the position of the pot
from the pedal
but an optical unit has no pot in side
so i ask myself were do the remote will get the info from the pedal

The Title says it
can i use my optical Volume pedal as a Expression Pedal for the KPA ?
Wanted to try it but im unsure if i can broke anything inside the KPA,
cause an optical Pedal is an active unit, means it runs with 9 Volt Power
Im aware that i have to use a Y Cable from out and in to a stereo plug to make a vol pedal work as a expression pedal

einfach die 3 Pedale mit stereo klinken an die Anschlüsse
der Remote stecken und im system Menü die Funktion einstellen die man haben will
sprich vol oder wah oder pitch
alle einmal Kalibrieren auf der selben system seite

you will always have latency when connect 1 Kemper into the other
The only way is your split box
in = Git
A to Kemper A
B to Kemper B
out Kemper A to Cabinet
out Kemper B to Cabinet
when only one is powered you m´need a second Poweramp
patching one out to to any in of a second kemper will result in latency
cause auf the ad da conversion

Today i checked
Mission Pedal for Kemper
Dunlop DVP X
Moog EP 3

my conclusion is
Mission , best look but the Vol regulation or expression regulation not so good
Dunlop def the Winner, smooth regulation , best pedal
Moog def absolut best pedal when it comes to price vers what you get but
when it comes to what is the best of this three
Dunlop rules
and i ve been def upset by the mission
expensive , quality built but not good working