What about the three little LED´s on the remote?
Posts by janus
-
-
Hi,
vorm Auftritt mit der Taschenlampe etwas anleuchten, dann sollte es über Gig hinaus reichen. -
Adjusting Volume by ear can be tricky. Maybe it´s an Volume Override (clipping) in an Effect / Slot?
-
Use the Tuner Button and set the Tuner to "Mute".
-
That looks awesome!
-
-
For a "virtual Volume" i have defined the Tap Tempo Button as a Morph Button (because i have no use for the Tap). In a Performance i switch to a mophed Rig by pushing the "Tap" into a one Rig with lower gain. By using this Method, i don´t need a Volumepedal in front of the Amp-Section anymore. Maybe you can try this with the Input-Section (Distortion Sens)?
-
And all three looking top-notch!
-
Maybe it will help to uncheck the Button "Use Rig Exchange" in the Preferences? But it will not help if it´s already checked! Mine did not start also!
-
Holy Moly! The PR 001 shreds! Well done sir!
-
-
I´ve these BE100-Profile for live-use in mind. After fiddling with the knobs over the weekend i must say, that these profiles are very well balanced. The sound and characteristic among each channel and switches don´t jump up and down so much. They are changing very even throuout the Gainstages. Like Ash and others stated the Low- and Midgain-Profiles are really sweet and have this grit and response to it. I don´t know how to tell, but the sound isn´t liveless like many other profiles. They got some dimension. Shure, if you reach the HG-Channels, you can feel more saturation etc., but without getting muddy or undefined. Btw, for my personal taste, these profiles got a little too much lows and highs. But that´s just me and i got these problem with nearly every profile. But therefor there is an EQ, twiddle the tone to taste. That should be no problem for recording-purpose. But for live, you can´t live without a frown-face. All in all for a Marshall-(Friedman) Guy these profiles should be a nobrainer. Very nice Amp, Cabinet and Profiles.
Thank you Mattfig! -
Here is the clip I posted above minus the backing track:
External Content soundcloud.comContent embedded from external sources will not be displayed without your consent.Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.
Pretty cool. What Guitar and Pickups have you played in that song? Have you tweaked the Profile or have you used the default settings?
-
...- You could plug your monitor signal coming from the FOH to the aux input of the kemper and blend it with your guitar directly in the kemper going the headphone out, without the need for an additional mixer.
Thats how I got rid of every additional monitor mixing device.Sebastian
Same here. I feed the FOH-Mix into the Aux and Return. But don´t forget to mute the signal of your guitar that´s coming back from the desk. You can get some phasing issues.
-
I like that last one the best, I think - but I like the bass to be prominent which may not be what you're looking for.
I think you need to step away from it for a week. Going from like to hate in five minutes is a sign that you need time apart right now
But other than that - get the bass to the right level - and THEN deal with the muddiness (which i don't necesarily think is too bad, actually). Though it may be a bit boxy. It's not exactly the same tone as the rhapsody track, but it's also fairly different in energy etc.
One thing to try - AFTER getting the rigt overall levels - is to put an EQ on the master buss and try to make some moves on that where you think you improve the overall sound Go for a few simple moves - the "big wins". Then copy that EQ to your guitar and bass tracks, and see which of those moves are suitable for each individual track - adjust from there. Not all those tracks will need it, but it can be a great help to go from big picture to smaller elements like that
I thiink Michael is right. Don´t hang into too long. Get your ears a break and build it up again.
-
In the Delay-Section, uncheck the Box top left "Tempo ..." so you are able to dial in the Delay in ms.
-
Thought about it the last week. Would be nice if you can load your Bandlogo, Name or your favourite Pinup in the Kemper Display so you can personalize your Kemper (GIF, Jpeg, PNG...).
It could be used as a kind of "Screensaver" and as soon you hit Button your default screen can be seen.
Alos helpful if you play with a few more Bands and all are bringing their KEMP´s with them. So you seperate them from each other.
Just thinking... -
A very nice variation of some cool AC/DC-Sounds. And i guess they were made by ear, not by tonematching etc. pp.
So choose your Sound, start your favorite Song, play along and have fun! -
Mahlzeit.
Da das Morphing auf einem Presetplatz für mich nicht praktikabel ist, habe ich die Funktion auf die Tap-Taste gelegt.
Schön wäre es jetzt, wenn sich vom Wechsel von Tuner auf diese programmiert Taste auch der Tuner wieder ausschaltet und ich den Sound höre. -
Same here.
I got a "Test-Performance" where i check new amps, effects etc.
When i save the performance (all effects are off). As soon as i hit the store button (overwrite the existing), name the perormance, the reverb is activated!
The Morphing is deactivated in the system menu. The Firmware is the first 4.06 Release.
I don´t know...