Posts by psagmajor

    I don't also not know if the device supports sysex.
    The problem is, i can't find the Interface in the settingsof toastME. Windows has recognized the adapter and a connection via bluetooth to the adapter is established. But toastME cannot see the interface. That's why i assume that toastME does not support bluetooth midi devices.

    Hi to all,



    I own the yamaha MD-BT01 bluetooth MIDI Adapter.
    Does not work with ToastMe.
    I am not that MIDI specialist, so can someone please explain why it does not work? Does ToastME not support MIDI over Bluetooth?
    Is it possible to get it to work?


    Thanks in advance

    I own the yamaha MD-BT01 bluetooth MIDI Adapter.
    Does not work with ToastMe.
    I am not that MIDI specialist, so can someone please explain why it does not work? Does ToastME not support MIDI over Bluetooth?
    Is it possible to get it to work?


    Thanks in advance

    Hallo Burkart,


    I looked into the reference manual and checked the video tutorial und checked all my settings on the kemper but Wah pedal booster doesn't do what as it is supposed. As i described, if a Wah pedal booster is in a rig, volume is taken down if i step on the expression pedal. If i uncheck "wah to volume" only the Wah pedal booster is affected from the expression pedal actions.


    I can confirm this if i look into sytem menue page 5 (Pedal Links)
    If a Wah stomp is in the rig only the bar "Wah (CC01)" is moving whe i step on the expression pedal
    If a Wahl pedal booster is in the rig "Wah (CC01)" and "Volume (CC07)" are both moving.
    And as said earlier the expressionpedal is configured as Wah pedal an option "WahPedal >Vol" is checked


    Which things do you thing i am confusing? Maybe because i wrote about a volume pedal in my frist post? That was missleading. This "volume pedal" is an expression pedal...

    But i configured the expression pedal as a wah pedal.....


    Wait a second... I activated the "WahPedal>Vol".... And maybe that's the point... I deactivate "WahPedal>Vol"...
    Okay, now the pedal works as expected and controls the Wah Pedal Booster.


    But what a bummer.... But doesn't matter. I use the Wah Pedal Booster for getting a thicker tone and not for volume control so the parameters for the Wah Pedal Booster are static...



    On the other hand: may this be a reasonable feature request? To have an expression pedal configured as wah pedal with WahPedal>Vol engaged and it would handle the Wah Pedal Booster the same way as a Wah?

    Hi to all,


    tried to set up the Wah Pedal Booster but didn't get it to work.


    I have one volume pedal (Mission GP1-KP) connected to the remote. "WahPedal > Vol." (page 5 wihin sytem menue) is activated.


    I placed the WAH Volume Booster in the X-Slot, activated it and was expecting my volume pedal to control the wah pedal booster. But it doesn't so. If the WAH pedal booster is engaged the signal is boosted but the volume pedal is still working as a volume pedal (tuner starts if pedal is in heel position). Means i can't control the boost level of the wah pedal booster with my volume pedal.


    If i put the WAH into the X-Slot and activate the Slot my volume pedal controls the wah as expected.


    Did i get something wrong with that Wah pedal booster?

    Since firmware version 5 the delay can be put in every stomp position and is no longer bound to the Delay-slot.
    In position MOD X i have a dual crystal and now i want to change the position of these two stomps vice versa...

    Hi OhG,
    thanks for your hint, but unfortunately, that's not what i want. All stop slots are occupied and i want to change the position of two stomps. I exactly want to change the position of two stomps. Delay in position "Delay" shall be moved to position "Mod X" and the stomp in position "Mod X" shall be moved to position "Delay" . Copy and Paste will to lesd to the loss of the settings of one of the stomps. As i said, all stomps are occupied...
    Further tips?

    Hi,
    trying to move stomps within a Rig does not work. I already found hints saying pressing the stop button a few seconds to get the move feature. Unfortunately this does not work for me. I push the stop button an hold it but nothing happens. What am i doing wrong?
    Any help would be welcome..
    Thanks.

    I don't think it is the polarity. It's rather the the position of the switch.
    I use a standard Yamaha footswitch. If i step the switch Beat detetction is engaged and never goes off until i push the exit button on the KPA.
    I resolved the problem in the following way:
    Looking into the yamaha pedal i stated, that the switch is closed in normal position. When i step onto the pedal the switch is opened. If i release the pedal, the switch is closed. So i took the soldering iron and reversed that.
    The switch consits of three thin iron sheets, two solderded together one single. Let's call the sheets 1,2 and 3. 1 and two where soldered together, three was single. I unsoldered 1 and 2, solderder 2 and 3 together leaving 1 single. Now the switch is open in normal position and closed if i step on the pedal. If i now hold the pedal pressed, beat detection is engaged. If i release it beat detection goes off.
    "classic tapping" by stepping the pedal is still working as usual.
    That was it...

    I still use my AXE-FX Standard. And i would use the Shortboard with both, the Kemper and the AXE-FX (not simultaneously).
    I think, for this purpose i would need both, a KempLine and an AxeLine converter. Right?


    An alternative to this all would be a gordius Little Giant or a Liquid Foot +12. (Behringer is definitely not my choice) But that gear isn't cheap... (500-600 Euros, grandma would have to knit a very long time for it...)


    Other alternatives? As said, i want to use the controller with both, the AXE and the Kemper.