Posts by Navar

    Erwarte ich da zuviel Flexibilität vom Toaster?

    Das Problem an sich hast du ja mit allen Setups und es gibt dazu kaum richtig smarte Lösungen.

    Ich kenne das von anderen System auch nicht anders, entweder man macht sich ein Preset, eine Performance oder ähnliches, was dann zu der Gitarre passt, oder aber man schaltet die Input Presets um und das ist dann meistens in einem Menü, weil die Front Bedienung in der ersten Reihe schon von anderen Sachen belegt ist. Und eigentlich kommt man beim Kemper ja auch relativ schnell ran.


    Wenn das was Yoda Guitar geschrieben hat so funktioniert wäre es natürlich ein gangbarer Weg, sich einfach ein weiteres MIDI Pedal dazu zu legen auf dem dann die Input Presets geswitched werden, das ist dann schon ziemlich einfach.

    Ich weiß nicht, ob der Kemper mittlerweile ein Input Preset zu einer Performance laden kann, das wurde ja schon relativ oft gewünscht, aber dann muss man sich für die Gitarren natürlich auch die Performances anlegen bzw. mit Copy&Paste zusammenbauen.


    Dann wäre es natürlich auch ganz smart, wenn man auf der Remote bei den Footstomps nicht nur Effekte an und aus machen, sondern die vielleicht auch für Input Preset Switching benutzen könnte, aber das wäre halt auch ein Feature Wunsch und ob sowas umgesetzt wird ist fraglich.


    Clean Sense und Distortion Sense sind ja prinzipiell etwas unterschiedliche Dinge, aber wenn es erstmal nur darum geht, das Input Gain zu verändern, könnte man auch einen Clean Boost im ersten FX Slot benutzen. Damit kann man dann unterschiedliche Gitarren boosten oder vom Input Gain verringern. Mit dem Morph Feature könnte man dann relativ einfach 3 Gitarren mit unterschiedlichem Output benutzen. Man verliert halt einen Slot dabei.


    Ich persönlich muss gestehen, dass ich extreme Gitarrenwechsel wie von dir beschrieben von Duesenberg zu ESP mit EMGs live kaum mache und wenn, dann genau aus dem Grund, dass es auch komplett anders klingt. Ab und an spiele ich mal eine "Ballade" mit meiner Tele, aber dafür habe ich dann eine eigene Performance für die Gitarre, die Input Presets fasse ich in meinem Live Rack nie an, die sind für die heißeste Gitarre eingestellt, den Rest mach ich über die Sounds.

    Hi Gents, thanks for that - some great points and V8GUITAR it all makes perfect sense to me - I am going to experiment with both ideas that you guys mentioned - In recording and post production the possibilities are endless but its very interesting when we will or die by the sword in a live environment -

    In recording and studio situations most people prefer to track real doubles whenever you need a stereo double of instruments. There are situations where synthetic doubling and widening is used but you have to be careful because when you make a mono source into stereo you are messing around with your center image. Reverb, Delay etc. is different here.

    Live you have more or less the same problems with the added room of the venue and the more or less good setup of the front of house system. If you use too much synthetic widening you can mess up the signal so much, that people will have problems to hear you in the center. The only thing which really worked for me was the tc mimiq in a double amp setup. And before people say that this could never work just go to a Dream Theater Show. But they also have an awesome crew and sound guys so they know what they are doing there.

    As I have some experience as foh I could absolutely work with some stereo delay and reverb. As long it is not ping-pong delay the whole show sometimes it's nice to add a bit of excitement too. And live I'm also more into using delays, a reverb can mess with the natural sound of the venue too much for my taste, except if you want to have a special FX like lofi reverbs, shimmers or something like that which is essential to your tone.

    And before a FOH tech sums your stereo signal into mono use a mono signal on your side and turn off the widening. If you use synthetic widening like the ones in the Kemper or the tc mimiq and you mix this to Mono than you can get into real trouble.

    2. Wenn ich eine Performance gespeichert habe, mit einem gekauften Rig, ist dann die Performance mit dem gekauften Rig im Backup verfügbar, oder is die weg?

    3. Sind die gekauften Rigs auch im Backup drinnen?


    Es gibt keinerlei Kopierschutz oder ähnliches. Der Kemper weiß gar nichts davon ob ein Rig gekauft ist oder ähnliches, da gibt es keinen Unterschied. :) Also zum Glück alles gar kein Problem. Für irgendwelche Nutzungsrechte und alles was damit zu tun hat sind Verkäufer und Käufer zuständig, Kemper hält sich da komplett raus.

    Also das ist mir persönlich noch nie passiert und ich hab schon einiges an Mikrofonen vor die Boxen geworfen um zu sehen was dabei rauskommt und Profile davon gemacht. Ob nun Groß- oder Kleinmembran, von U87 bis zu billigen NT5ern, da kam zumindest ein normales Profil bei raus.

    Das 460B hab ich jetzt auch eher am Drumset als am Gitarrenamp. Ich kenne jetzt diesen Wendt Mischer nicht, aber wenn der einen Low- und/oder Highcut hat, dann könntest du den mal versuchen und schauen was dann passiert. Vielleicht mal die Amp Lautstärke verringern und vor allem mal so mit dem Mikrofon aufnehmen und checken wie das dann klingt. Viel mehr fällt mir so spontan dazu auch nicht ein.

    Ich suche Informationen zur Samplefrequenz und finde leider nur sehr wenig. Ich bin unglücklich mit einigen dumpfen Klängen der Rigs! Ich habe einen Kemper Stage und fahre ihn über 48khz mit einem Focusrite 8i6. Wer kann mir ein bisschen mehr zu dem Thema erklären und wie klingt der Stage grundsätzlich besser. Ich kann auch den Master nur bis 50% fahren, dann erziele ich nicht mehr Lautstärke?? Bin neu am Stage und hatte früher schon mal einen "Toaster". Den habe ich allerdings über XLR gefahren. Danke

    Unterschiede in der Samplerate sind in der Praxis nicht hörbar. Sollte man sie in irgendeiner Form hörbar machen wollen braucht man schon eine hervorragende Abhörsituation. Das spielt aber auch dann beim Kemper keine Rolle und Gitarrensounds im Allgemeinen profitieren da auch nicht sonderlich von.

    Auch einen Unterschied zwischen XLR und SPDIF Übertragung zu hören liegt im Bereich der Mythen und Legenden, es sei denn, man hängt da einen extrem färbenden Preamp zwischen oder macht sonstwas mit dem Signal unterwegs.


    Wenn es dumpf klingt, dann liegt es vermutlich entweder am gewählten Rig, der Abhörsituation oder einer falschen Einstellung. Soweit mir bekannt ist wirkte sich der Master Out EQ auch auf den SPDIF aus was gerade in der neuen Firmware geändert wurde. Wenn man da etwas eingestellt hat, weil einem der FOH beim letzten Gig gesagt hat, dass man doch etwas die Höhen global runterziehen soll hat, man das vielleicht bis daheim einfach wieder vergessen. ;)


    Wenn man die Abhörsituation und eine falsche Einstellung ausschließen kann, dann sind die gewählten Rigs einfach nicht die richtigen für den persönlichen Geschmack. Egal ob Stage, Rack oder Toaster, der klingt immer gleich. Oft ist es auch gar nicht der Amp Sound an sich sondern das Cabinet im Sound, es ist durchaus auch mal einen Versuch wert, ein anderes Cabinet einzufügen und zu sehen was da passiert. Deutlich mehr als 50% des Gitarrensounds hängen von Gitarrenbox + Mikrofonen + Bearbeitung ab und nicht vom Gitarrenamp an sich.


    Außerdem sollte man sich bei der Soundauswahl wirklich erstmal auf den persönlichen Geschmack verlassen, nur weil vielleicht irgendwelche Profile von vielen Leuten gemocht werden, heißt das noch nicht, dass man die auch mögen muss. Und jeder "Profiler" hat ebenso seinen persönlichen Geschmack den er mit in den Sound bringt, das kann man auch einfach nicht mögen, das ist nicht schlimm. :)


    Was bei Manchen hilft, die sehr lange nach Sounds suchen müssen die ihnen gefallen, ist, mal zu versuchen mit Direct Profiles zu arbeiten und sich 2-3 gute Impulse Responses oder Cabinet Presets zu suchen die mit dem Sound das machen was man möchte. Mit denen geht man dann auf Amp Suche und schränkt sich dadurch automatisch bei der Entscheidungsfindung ein wenig ein. :)

    Use the volume controls on your Guitar.

    This can also effect the tone.


    Clean Sense is the parameter in the Kemper which is responsible for that. I have to say I don't think this workflow is super handy because you need the clean sense for two different types of applications in the Kemper. One is for playing live and to adjust the balance between clean and distorted sounds and the other is for recording or providing a DI track. And in my very personal opinion it misses a dedicated control for adjusting the DI output level. Personally I use several different DI boxes in my studio for different sounds and different applications which gives me the maximum control over the signal.

    das würde ich zuerst mit der Mic-Position durchführen.

    Sicher, mir ging es darum, eine weitere Möglichkeit zu zeigen wie es geht :) ich persönlich hab eh Dynamounts die ich aus der Regie steuer.

    Ich wollte nur aufzeigen, dass man mit dem Weg durch die DAW auch hervorragende Möglichkeiten hat, in Ruhe das Signal zu bearbeiten. Gerade für Leute die keine getrennte Regie haben, ist es mitunter schwer, das Endresultat in Ruhe abzuhören. In der DAW kann man problemlos das Gitarrensignal an den Amp schicken, das Ergebnis aufnehmen und dann verschiedene Mikrofone gegeneinander mischen, bearbeiten und auch die Lautheit soweit angleichen, dass man sich nicht davon täuschen lässt, nur weil es mit zwei Mikrofonen vielleicht einfach nur lauter und nicht immer besser klingt. ;)

    Sorry, ich wollte damit keine Verwirrung stiften und halte mich raus.

    Danke schon mal für eure Antworten. Ich werd in den nächsten Wochen starten und werd dann mal ein Feedback geben.

    Wenn Du einen Computer mit einem Audio Interface, mehreren Eingängen und Mikrofon Preamps hast, kannst du das auch damit machen. Also nur als Tipp, falls du darüber nachdenkst dir dafür extra ein Mischpult anzuschaffen. Du könntest dabei sogar durch die DAW gehen, die Signale bearbeiten, Phase Alignment machen usw.

    Anytime you amplify something you add noise.

    Not in the digital world. The signal to noise ratio stays as it is. You can easily check this inside any DAW with a null test. :) As long as you don't overshoot the converters but than you got clipping.

    Kann mir jemand sagen, was ich hier falsch mache?

    Wenn es die gleichen Einstellungen sind, dann tippe ich darauf, dass einfach die Hörumgebung eine komplett andere ist. Hall und Delay sind über Kopfhörer vollständig anders wahrzunehmen besonders dann wenn sie isoliert kommen als über eine PA. Ähnlich verhält es sich mit dem Cabinet. Technisch gesehen könnte man nochmal checken ob die PA nicht falsch verkabelt ist und sich da ein Phasendreher eingeschlichen hat, aber das müsste sonst auch eigentlich zu hören sein.

    Besteht die PA aus Aktivboxen oder habt ihr eine große fest installierte Anlage? Wenn es einfache Aktivboxen sind, dann nimm dir doch mal eine mit nach Hause und check die mal gegen deine Hörumgebung.

    Nach meiner Meinung kann man nicht die komplette Signalkette profilieren!?


    Also grundsätzlich kann man das alles versuchen, aber das wird unter Umständen weit vom gewünschten Sound weg sein.


    - Overdrive, Distortion und EQs gehen in der Regel sehr gut, es sei denn es wird nur gezielt ein Frequenzbereich verzerrt wie z.B. bei modernen Metal Bass Sounds.

    - Gates machen Probleme weil der Kemper versucht, den Dynamikumfang und die Reaktion des Amps darauf zu profilen. Das Gate verhindert das in den unteren Lautstärken. Das hört man dann auch schon während des Profilings wenn das Gate nicht alles durchlässt. Auch hier... da kann was bei rauskommen das man verwenden kann, garantiert ist das aber nicht.

    - Kompressoren funktionieren nicht gut, die schränken auch die Dynamik zu sehr ein, vermutlich würde eine ganz leichte Kompression mit einem dB GR auch funktionieren, aber ganz ehrlich das kann man sich dann auch schenken und hinterher den internen Kompressor verwenden.

    - Modulation, Hall, Delay geht nicht, jedenfalls nicht so wie man es gerne hätte. :)


    Für Experimente dazu empfehle ich übrigens, einfach mal eine Amp Simulation am Computer zu profilen. Da kann man dann lustig mal rumprobieren und schauen was da so passiert, gerade wenn man keine eigene Regie hat um hinterher das Ergebnis von Profile und echtem Amp vernünftig nebeneinander zu halten. :)

    Also, beim Profiling würde ich erstmal alles vor dem Amp rauswerfen außer Booster Pedale (wenn sie kein Gate haben) und den FX Loop ausmachen. Besonders Kompressoren und Gates gehen einfach nicht oder nicht gut. Womit ich aber gute Erfahrungen gemacht habe sind Dynamische EQs, die klappen sehr gut finde ich.

    Ich hab auch schon Profile gemacht z.B. mit dem Horizon Devices Booster bei dem man das Gate nicht ausschalten kann, aber das war mehr oder weniger Glück. Bei einem Durchlauf hat es geklappt beim nächsten wieder nicht.

    Did both nothing... Same error. Do i need to go the Direct output Been using Monitor out

    "Send/Direct Out" goes to the amp, "Return" comes from the microphone, preamp, mixer whatever you use.

    - First check if you hear the measuring signal from your guitar speaker. If not, than there is a problem from the Kemper to the amp. Cable, wrong output, amp switched off or something like that.

    - Than check the signal coming into the Kemper. If there is nothing, check the microphone, cable, connection and the return volume at the profiler page and so on. Try another input maybe on your computer and check if there is a signal coming from the microphone.

    - If you are coming from a mixing console or your computer check the routing, mute switches and so.

    - If you want to do more complex things like combining microphones, EQs, pedals, software... than break it down to the easiest signal chain and work your way up to what you want.

    Hi,

    Naja, das hängt ja ein wenig davon ab was du machen möchtest. Möchtest du das Gitarrensignal loopen bevor es in den Kemper geht oder danach um den Sound einzufangen den du gespielt hast, oder sogar dazwischen um vielleicht das geloopte Signal nochmal verhallen zu können usw.


    Und das String Ensemble ist ja erstmal für "davor" gedacht wobei das nicht heißt, dass man es nicht auch irgendwo anders platzieren kann wenn es das ist was man möchte.


    Beim Kemper hast du prinzipiell 3 Möglichkeiten. Direkt vor dem Eingang, direkt hinterm Ausgang oder aber in einem Effekt Send/Return, wobei du die Position von dem Effekt Send/Return selbst bestimmen kannst. Dieser ist einfach ein Effekt den du in einen Effektslot packst und das kann an jeder beliebigen Stelle sein, wobei die erste und die letzte Position dabei nur bedingt Sinn machen, weil du den Effekt dann auch genau so gut gleich vor oder hinter den Kemper packen kannst.

    I would not suggest people buying el-cheapo IEMs, but as a first step a set of Shure SE215s are impossible to beat for all around value.


    No - they do not compete with good, multi-driver brands - but they’re also WAY less expensive at $120 or so.


    I’ve got a pair I’ve used at church since 2015 or so. Are they great? Well….they aren’t bad and they’re as durable as can be.


    I replaced the cable once….in 7 years, being used a 4-6 times per month depending.


    Yeah would never talk against the built quality of those and the "bang for the bucks" factor. :) I have them too as a backup and also for guests. And also I made a custom fit for my ears which increased the bass response a lot in my case. But wouldn't call them a lot of fun. Many people who start using inears have problems missing the balls in the sound and it doesn't give them a great time. And I would argue, that this mainly comes from the inears and a bad mix. :)

    Anybody out there switch from using a cab to completely direct only through IEMs? Would love to hear your thoughts!


    As already mentioned, don't go cheap on the earbuds. Go with a brand with a good service so things can be repaired, fixed or adapted as ears change over the years. It sounds stupid to pay about 1k and above for good quality headphones but they are worth it. For me just personally all these generic one size fits all things from the known brands are okay but not a little bit fun to play guitar with. Everything which is meant to work with vocals and features the range of the voice to cut through a loud band on stage with generic inears makes your sound fizzy and thin. It has to be fun to listen to music with them. Just my opinion on that. :)

    And it makes a huge difference if you have a well thought setup with a dedicated InEar mixer. No one else than you knows how you want your live mix. We have a complete plug&play setup. Stereo inear for all people and normally we don't need to change anything from rehearsal to the stage, the last 1-2% are okay to live with if the front sound effects the inear sound. It takes about 5-10 minutes to built the whole stage and we are ready to go from that moment.

    The only problem is the rabbit hole with the enormous available rigs.

    What I meant with this thread was to ask you guys if you think the present is the final firmware or if there could be future main firmwares update.

    This rabbit hole will get bigger and bigger :) That's the thing with all of those devices, you can get lost in options so you need to develop a strategy which works for you. Mine is: I use mainly my own profiles and if I make a new bunch of them I only keep the ones I really like. Also with the RM database or commercial ones. If a profile doesn't give me something that I do not already have or inspires me to make some music with, than it goes directly into the trash can. In my own database I use the rating function a lot to remember what's nice and most of the time I need about 30 seconds to guess if it fits my guitars and my music style. Maybe I've thrown away some good ones, but who cares when you have more profiles available than you can ever play.

    And I don't spend time with tweaking to see, if I can bring an awful sound to live, only with sounds that are nearly close to what I want. And for quick and dirty songwriting I have a collection of all what I need so I don't need to search for a basic sound until the idea is gone.


    And the thing with the Kemper software is: The main algorithm is done, there aren't a lot of things which can be improved on that side. Maybe they can develop a more advanced refining process with a more generic approach so you don't have to work your way through that whole thing on your own. But I think if this is doable, they would already have done it. But that's also the part of creating "your" sound if you make a profile.


    The Kemper Drive and the Kemper Fuzz were a huge step into a very interesting world where you don't look at the same old "oh lets make a software clone of an old boutique pedal" thing. Instead they gave us a tool to create a more unique sound inside the digital world which is awesome. I can imagine that there are some other applications like compressors or anything like that for that kind of approach. Don't know about the processing limits for those kind of algorithms and if everyone is so excited about those tools as I am.


    And for all the other stuff there are tools available. In my personal opinion the whole pitch shifting thing for tuning the guitar up or down has too much latency and doesn't sound as good as the popular alternatives for what I want. But that unit costs around 100$ and I don't care about that anymore. :)


    Overall the infrastructure is done. And you have to ask yourself if this tool is the right one for you or what you are missing to achieve what you want. Feature requests for a Kemper 2 are already all over the place and if they will ever release one they will surprise everybody with something completely unexpected. My oldest Kemper which runs in my studio (have a touring rig also) and is working since 2013. That's a freakin long time for a guitar tool and in this crazy festival year you could see Kempers on all stages. I am curious if a lot of the players ever needed to fire up their B Unit. Me not one time. The only time I really needed the B unit was when the amp of another bands player failed and he needed a fast solution. :)


    But Kemper was always really good in not telling everybody what their next plans are and than surprise, surprise there is something no one had in mind :)

    That you can't type in values is so frustrating and cost a lot of time. I really don't understand why those things are not happening. If it's the budget or the manpower, than please let the community help. :)

    oder halt ein Poe Adapter. Hab schon einen hier liegen, hab ihn aber noch nicht verbaut.

    Ich persönlich würd's einfach machen, damit ist man auf der sicheren Seite, dass die Stromversorgung wirklich da ist. Seitdem hab ich nie wieder irgendwelche Probleme gehabt, ich hab die Standard Neutrik Cat Kupplung in eine Patchbay verbaut, der PoE sitzt bei mir dahinter und nie wieder irgendwas gehabt. Vorher hatte ich mal das Worst Case Szenario, da ist mir die Stromversorgung zwischen Soundcheck und Gig ausgestiegen, alle langen Backup Kabel haben nichts gebracht, nur ein kurzes 2m Kabel hat noch funktioniert. Dann lernt man zwar wieder die Potis an der Gitarre zu schätzen, aber das war schon super nervig.

    If I made no wrong, and the difference of sound is minimal, are you still recording spdif for the sake of having more free inputs available?

    Thanks for your insights :)

    To hear a significant difference between analog vs. digital spdif connection you have to have something in your analog chain which colors the sound drastically. (can be bad or good or just different) Modern interfaces try to get a very clean sound and to be honest, electric guitar sounds are not the most high fidelity sounds you can use to compare difference in adda conversion or something like that. :) So it's more or less a question of how comfortable you can setup things in one way or the other.