Thank you.
Posts by azertyvince
-
-
Quote
You can however use this as a standalone IR loader, the Logidy EPSi
logidy.com/?pid=1Does it controllable by the Kemper through MIDI device ?
-
Does it possible to reprofile a profile (for adding something in the chain) ?
-
Yes, thank you.
You could have put the slots horizontally, at the bottom of the screen.
Where the switchs (I II III IIII) are located ? -
Could you please make a sreen shot of the rig manager in performance mode (i don't have the Kemper).
Does we see the five switch of the remote ?
-
-
What are the equipment for which the Kemper team confirmed that she was working on ?
Who would be able to make a summary ?
-
The "meilleure" guitar in the world : ARIA Pro II RS Series - Original Smooth Joint
Look at this ![Blocked Image: http://nsm08.casimages.com/img/2016/05/09//1605090313149350714211965.jpg]
[Blocked Image: http://nsm08.casimages.com/img/2016/05/09//1605090313319350714211966.jpg]
[Blocked Image: http://nsm08.casimages.com/img/2016/05/09//1605090313479350714211967.jpg]
[Blocked Image: http://nsm08.casimages.com/img/2016/05/09//1605090314539350714211972.jpg]
[Blocked Image: http://nsm08.casimages.com/img/2016/05/09//1605090314049350714211969.jpg]
-
All on line demos I've heard from the axe fx was good concerning high gain amps, but not convincing for the rest.
-
Does an IRs loader actually use more CPU than an algorithm ?
-
-
Quote
I believe convolution reverb is a resource hog,can't see that happening in the Kemper .
Bare in mind when your using Guitar Rig 5(full disclosure, i don't have any experience with this program)or other programs(Logic comes to mind) that have the ability to use convolution reverbs your using full fledge computers.
I have no doubts we will have great reverbs in the future, but my guess is that will be trough great algorithms.
Yes, but the Kemper use IRs for cab. It's close to IRs for reverb, even if it needs more CPU.
-
The Kemper makes one feel the essence of amps when profiling is done well.
Some reverbs IRs I have in stock are really subtle and have a very special and exquisite color.
The combination of these two tools ( Kemper + reverb IRs ) could give something absolutely fabulous .Not counting those who want to pick up vintage spring reverbs of any type.
-
IRs loader to load some reverb (.wave), with parameters like mix, eq, gate, predelay.
There's a similar feature into "Guitar rig 5".
And here, it would be very close to the Kemper's IRs Cab section.This would have easily a "spring reverb" or a large amount of reverbs with specific colour sounds (gold plate, warm room, ice reverb, dark chamber...).
There's a full of free IRs on the web (.wave) i use for mixing and the quality is awesome.
-
In many mixing situations, guitar sound is cuted at extreme low frequencies.
A parametric eq with low cut and high cut would be interesting (with slope adjustement, and specific frequencies adjustement).
Cut the guitars around 80 hz or 90 Hz is often good.
And cut another guitar higher (100-150 hz), with a smaller slope.
Some frequencies around 3-4 khz must be attenuated too, to make room for the voice.It would be great if this parametric eq were into the output section, instead of having to tweak this for each rig.
-
Quote
If you want to lengthen that chain to before the pickups, what's your input signal there?
An electromagnetic signal generator just placed in front of or on the pickup.I think about something like this or close : http://www.woodbrass.com/effet…-e-bow-e-bow-p205496.html
It could generate a kown signal.
-
Does it possible to add a guitar pickups profiling in the kemper.
Does it possible to profile a guitar pickups with an electromagnetic signal send in front of a pickup ?
Kemper would calculate the difference between the profile of your guitar pickup and the guitar pickup you would like to get ?
-
"Impulse modeler" by Voxengo is good.
-
-
It's so close that it is almost suspect.