the noise cancelling system on mine is some kind of dummy coil wired in series
it is preset to match the output of the suhr pickups
since i put higher output pickup, a (very) little hum has appeared
i tried to pull out the system to see if i could set it to my pickup but it is severely glued
Posts by lef38
-
-
I have a suhr Classic Pro and I think it's the best guitar in the world, simply
Here is what you get when you buy this model, from top to bottom :- staggered (so, no string trees) locking tuners
- Indian Rosewood fingerboard, got quite dark after applying lemon oil
- 9-12” compound fingerboard radius
- Tinted Quartersawn Maple neck
- stainless steel frets
- PLEK setup
- very tight neck/body fit (way tighter than my Deluxe & Eric Johnson strats) for better vibrations transmission
- hum reduction system that has no impact on tone (and no batteries) , you have to try it to believe it
- full shielding
- pickups: can't say, I swapped them for Leosound's redhouse pickups on first day
- very thin satin acrylic urethane finish : lets the wood breathe and vibrate + smooth feel + the thumb slides incredibly easily on the back of the neck
- 5-way selector is a superswitch : they could have used a standard switch, but no they give you the best, even if you don't ever notice.
The superswitch allowed me to rewire intermediate positions as series, without the need to buy a new switch (which I had planned to do).- and most importantly : high end quality woods
-
where can i find it ?
-
Sounds like a good idea but no effects ? no SPDIF out ? no presets ? I keep my Kemper !
-
Variax JTV.
Best acoustic simulator I've heard.
Yes because there is a piezo bridge in it.
Other than that i've tried the mooer acoustikar pedal, haven't been impressed. It's still far away from the sound you cna get with a piezo. -
Sharry if the piezo is installed correctly, you should have a stereo jack.
So with a Y cable you can send both signals separately to two different amps, say magnetic pickup => kemper, piezo => acoustic amp.
Of course that's two amps but this is certainly the best way to achieve this sound on stage. -
Buy that piezo guitar !
-
Not Kemper related, but you can use a guitar with a piezo bridge (such as Parker's), or install one by yourself (see Graphtech / Fishman / LR Baggs / Schaller brands)
they are using a stereo jack so with a Y cable you can easily send the piezo signal to an amp and the pickups' signal to an other amp
you can even blend both signals -
I have been disappointed not seeing any improvement on this in 4.0.
Can't you at least provide a Pre/Post assignment for the Tap / Tuner buttons ?
And I guess it shouldn't be hard to display on the remote screen whether the looper is in pre or post mode as a reminder. -
ok vu sur ton youtube
http://www.mediafire.com/downl…hc64f/Game+of+thrones.pdf -
Nice Games of Thrones cover
I remember searching for a good tab but couldn't find one. Do you have one ? -
I'm successfully using this (same as nut sauce) http://www.thomann.de/fr/ghs_graphit_all_guitar_lube.htm
Also when i have string guides like yours, I immediately change them for this kind (or roller ones):
http://intl.fender.com/fr-FR/g…-string-guide-black-each/
Less contact with the string, gives less opportunities for it to hang up
(or at least put nut sauce there too !! ) -
No I found him:
External Content www.youtube.comContent embedded from external sources will not be displayed without your consent.Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy. -
-
Is your guitar properly shielded , to begin with ?
-
I hope for you the guitar signal that goes into the kemper, is not the one that gets out of the trio...
-
With the monitor output , set to cab off, I hear a change whenever I turn the cabinet on / off.
-
-
-
Oh, and I'd like it on the SPDIF too because I'm EQing my tone before sending it to the cabs.