Posts by Fretburner

Quote from gstrotmann

Fretburner: I love your solution, too. Can you explain how do you fixed the quick release plates on KPP?

I decided not to use the Temple quick release plates. What I did was use 3M blue painters tape strategically under the player, not covering the holes to let air flow in then cut my pieces of Velcro and attached to the pedals and then to the board. I used the tape first so that if I want to remove the Velcro from the pedal it is much easier to do so. I have been doing this for years with great success and leaves your pedals looking factory on the underside. 👍🏼

Quote from lng_100

Hi - that's a lovely setup! I'm curious to know why you would need the Seymour Duncan Powerstage, when you can go from the Kemper Player into say the Kemper Kabinet. Is it because you are using an amp which is unpowered? Why not just use an amp that has power (like the Kabinet)? Thank you!

I had a Kemper 1X12 and it just did not cut it in my band situation. The 2X12 made all the difference.

Here’s my setup. Loving this!

Mine is in the way. Can’t wait to try it.

52 here! Love technology.

I owned a pair of them. They sound very good but are not easy to carry around. They are heavy and very awkward to carry due to where the handle is located on the cab. I've sinced sold them and went with QSC K12's which have way more power and sound just as good if not better imo. Good luck!

Im in the USA (East Coast) 80.00 for the pair.

Quote from whippinpost91850

Fretburner ,where are you located and how much for the Zoom pedal/s

You don't have to spend 100.00 plus each on expression pedals. Even inexpensive ones like these zoom pedals which are made of aluminum work great. If anyone is interested I have a pair I'll sell as I only need two of them.

[Blocked Image: http://i142.photobucket.com/albums/r118/kustomkarz/CPB/8845C8CB-03A4-4AA5-95B9-1D5366D01821.jpg]

Todd just eq it so you don't get flub. Turn the bass down! Don't forget you only have a 10" woofer and will only get so much out of it before it farts out. You may want to step up to a 12" I know a place that has a sale on brand new QSC K12's for 600.00!

I love my QSC K12's. Any FRFR will sound decent if you take the time twaeking your patches to work with what you have for speakers.

Shit like this happens when handling millions of packages a day no matter who the shipment is with. You have to make sure items are fully insured when packages are shipped as well as packing the items anticipating they are going to be dropped. Still sucks but I'm sure the dealer will have to send you another and deal with ups on the claim.

I own a Helix as well as a Kemper. They are both outstanding! The effects and routing capabilities in the helix are far superior in my opinion.

Anyone know when they will be releasing the update?

Just a standard Mic cable.

[quote='VictorRattlehead','http://www.kemper-amps.com/forum/index.php/Thread/26787-Is-this-FRFR-speaker-good-FRIEDMAN-ASM-12/? What kind of cable do I need to connect it to my KPA? Thanks[/quote]

I LOVE MINE TOO! a little awkward to carry and a bit bulky but I'll live with it because it sounds that good!

Quote from telelogic

What model Friedman are you using?

This board runs through my SMALLBOX.

60 connectors and 50 feet of lava cable. It's no longer wireless!

[Blocked Image: http://i142.photobucket.com/albums/r118/kustomkarz/CPB/CFD807D7-9F27-4C49-985E-B4241A8E5891.jpg]

Guys I picked up the effects case on ebay from Pockettrunks for 74.00 plus shipping. no need for power supply's as all I need is the Kemper and remote with the two controllers.

when I want to bust my balls lifting equipment I use a Friedman half stack and this monster pedalboard I built.

[Blocked Image: http://i142.photobucket.com/albums/r118/kustomkarz/CPB/865C11DA-E291-4244-9904-14F2CD826FF2.jpg]

Here is mine which is mounted in its case. Going for the small foot print with the Zoom controllers. Works slick!

[Blocked Image: http://i142.photobucket.com/albums/r118/kustomkarz/CPB/8845C8CB-03A4-4AA5-95B9-1D5366D01821.jpg]

SOLD