when you select slots with the Remote or over MIDI you will always call up the stored version of the rig in that slot and all unstored modifications will be lost.
The only exception to this is when you have the rig button morph option activated in the system menu. This will cause the rig button to start the morph process when it is triggered for a second time. Simply deactivate that option to have the rig button recall the saved state of a rig instead.
If you experience this behaviour when switching between different slots you should open a support ticket as this is not behaving as intended.
Posts by Kemper Support #1
-
-
Für eine Absenkung auf -12dB braucht man keinen Schalter. Den Wert kann man mit dem Outputlevel Parameter jederzeit einstellen.
Die -12 dB Funktion senkt den Pegel der Main Outputs um 12 dB ab. -
We received your email on the 27th of november and replied the same day asking for a picture.
Please check your spam folder.
Judging from the pictures you posted here it looks like some debris found its way underneath the display cover and is producing this artefact.
To have this fixed you need to send the Remote to our service center.
More details regarding this procedure will be supplied through the ticket system. -
Then went into the System settings:
On Pedal 5 i set:
MODE - PEDAL TYPE 1
FUNCTION - VOLUME PEDALthere is your mistake-you need to configure the pedal as a wah pedal not as a volume pedal. the pedal link is called wah to volume not volume to wah.
-
if the dry portion of the signal completely disappears it could be due to a phase problem caused by a faulty cable that connect the main outputs to your external gear (monitors, mixing board)
Are you getting the same problem also on the headphones?
What is the output source setting for the outputs that you are using to monitor the signal? -
have you activated the wah to volume pedal link in the system menu?
Is the pedal configured as a wah pedal? -
The fact that powercycling does not "help" in your case is not a bug but a feature. The last loaded performance or rig is stored in a so called edit buffer which survives a restart in case the user forgot to store the changes that were made to the rig or performance before the Profiler was powered off.
Switching to a different rig or performance clears the edit buffer and loads the newly selected rig or performance into it. -
if you never changed any setting all outputs are linked by default since we cannot foresee which output a customer will use for monitoring.
-
the master volume scale from 0 to 10 is a relative one. You probably have linked the master volume knob to more than one output and one of them was set to a much higher value than the others.
You need to set the output levels in the output menu for each of the outputs to similar values if you want to use the master volume knob for more than one output or simply deactivate the volume links for all but one output.
This has been addressed in the latest version of the Profiler OS where you see all output levels instead of a scale of 0 to 10 when you turn the master volume knob. -
The SPDIF clock has nothing to do with tempo or click. Its merely needed to synchronise two digital devices to ensure a stable audiostream. You need to send MIDI clock to the Profiler to synchronise delay times and other tempo relevant parameters.
-
Auszug aus dem deutschen Referenzhandbuch zu diesem Thema
"Solange sie mittels der linken und rechten Tasten am RIG-Navigationskreuz die Slots innerhalb einer Performance wechseln, werden alle Veränderungen wie z. B. das Laden eines anderen Rigs oder die Erhöhung des Gain als Editiervorgang gewertet und bleiben daher mindestens solange erhalten, bis sie die Performance verlassen. Wenn sie diese Änderungen permanent erhalten wollen, so müssen sie die Performance zuerst speichern, bevor sie eine andere Performance laden.
Wenn sie einen anderen Slot per Fußpedal laden, so werden alle bis dahin in der Performance vorgenommenen Modifikationen als temporäre Änderungen während eines Auftritts gewertet und sofort verworfen. Selbst wenn sie also z. B. einen Booster im B-Modul eingeschaltet oder den Delay Mix per Pedal erhöht haben, so können sie sicher sein, dass der Sound beim nächsten Laden des Slots wieder im Originalzustand erklingen wird. Durch diese Logik wird also vermieden, dass es beim Auftritt zu irgendwelchen Klangzufälligkeiten kommen kann." -
that feature only works with the main volume pedal that sends CC7. Monitor level is controlled with CC73 and it does not bring on the tuner in the heel position.
-
the fx switches do not send any midi programchanges. Only the slot switches do.
-
you need one TRS cable with a TRS plug on each end and a mono TS cable for the switch
-
the wet/dry setup is described on page 43 in the reference manual
-
I like Jimmy. He uses a wet dry rig though which is something you just can't do with a Kemper.......unless you have two of course ..actually thinking about it that wouldn't work either......not easily anyway.
M
You can run a wet/dry rig with a single Profiler. All you need are multiple speakers and the correct output source assignments in the output menu.
-
have you checked the actual output level for the direct out? Regardless of its value it will still generate sound with the 3 Git/ options but will be silent with any other output source when its turned down.
-
Yes, I can remember this awesome spatial chorus from the JC120. I have this rig but the spatial chorus is nowhere to be found. It's just a common clean rig without anything like...so disappointing. The choruses and reverbs in the Kemper don't even come close to this. So I ask myself frequently this question: What is one thinking when profiling an amp without using these kind of specific characteristics? And this happens more than once when I hear live bands using a specific guitar amp on stage, which obviously has been profiled and showed in Rig Manager but doesn't even get close in having / getting that same sound. It seems that, despite having a Kemper you still have to be a sound engineer as well..sadly enough, I'm not
effects that manipulate the time axis like delay, reverb and any type of modulation like chorus etc cannot be profiled.
-
you can use the panorama parameter in the rig menu to pan each rig to a different side of the stereo field.
-
out of the box all output volumes are linked to the master volume knob. If your speaker out does not react to the knob you must have unlinked it in the output menu. Simply activate the link again.