wie kommst du da drauf?
Am besten liest du mal das entsprechende Kapitel im Handbuch da wird die Funktion genau erklärt.
Posts by Kemper Support #1
-
-
Nope, that didn't seem to work. If pushing the button "LOCK", I get the message on the display "Lock Module. Select / Deselect Modules or Sections". Any other suggestions?
simply do what is being suggested in the message. Click on the modules and/or sections that you want to lock. In your case that would be the stomps, cab and effects. Once that is done loading a new rig will only exchange the actual amp profile and tone stack settings.
-
Monitor cab off im Output Menu ist die Funktion die du suchst.
-
when you press the lock button the module or section that is currently in focus will be locked.
-
There are no parameters in the Profiler that would allow you to set it up so that the transposed and the nontransposed signal are audible at the same time.
Please send an email to
[email protected]
and include a recording taken from the main outs and a copy of your current backup. -
Have you tried to record the signal?
-
du brauchst ein Kabel wie dieses
https://www.thomann.de/de/cord…l+s%2Fpdif+kabel_140155_9 -
It is correct that i do not know the EVH product but i did read its manual and in my reply i told you what you need to do to send MIDIprogram changes from the Profiler to the EVH so it can learn them. If that information is not sufficient to get it working you should contact the EVH support to find out what you are missing.
-
Every expression pedal needs a TRS cable to control a device.This is not unique to the Profiler but of course explained in our manual. Since we offer all of our documentation in PDF format it literally takes a second to find a topic by typing the proper word into the search field.
I don't know about the manuals of your pedals but i would be surprised if this type of info is not included.
Furthermore it was mentioned in this thread numerous times and you first claimed that you were using TRS cables.Once you solved your problem by using the proper cable please add the word solved to the name of your thread.
-
there is one in the global EQs in the output menu for that exact purpose.
-
Please update to the latest release version.
-
If running dual amps isn't a viable future option I do think that there should at least be more options with regards to parallel signal chain i.e running some stomps on both pathsYou can already do that using the parallel path function in the rig menu.
-
you should try the pedal pitch stomp for that.
-
The Profiler will work with any pedal that meets the expression pedal standards.
Have you tried to set the dip switches for the output on the pedal to send passive signals? -
The volume pedal has no influence on the DI track. You need to record the volume pedal changes from the midi out of the Profiler into a midi track in logic and then send that to the Profiler while you record your reamp track.
-
As Sharry already pointed out: the pedal you are using has a function that allows you to switch each output from either sending a passive or an active control signal.The Profiler can only deal with the standard passive signal.
-
how are you connecting the pedal to the Remote? In your video I can see two cables coming out of your pedal. The Remote only needs a single TRS cable to connect to a standard expression pedal.
-
what do you mean with
As soon as I switch the Kemper to Profile,As soon as you switch to Profiling mode or as soon as you switch between the reference amp and the Kemper in the Profiling mode or as soon as you start the profiling process?
-
You can place the stereo loop in the X, MOD or Delay slot but it will always use the direct out to send the signal to the external effect and the return and alternative input for a stereo return. You could configure the Profiler like you described to send a stereo feed into your external stereo effect but then you must use the Aux in function in the output menu to control the level of the return signal back into the mix and you cannot switch this routing on and off like you could with a stereo loop stomp and of course you cannot store it per rig since all settings in the output menu are global.
-
but that is not using the stereo loop of the Profiler but rather the aux in function. This send will be permanently on unlike the stereo loop.