Hi, I've noticed it too: I lower, with post-eq, the 2.500hz frequency in almost all the distortion rigs.
I leave Q at 707.
Hi, I've noticed it too: I lower, with post-eq, the 2.500hz frequency in almost all the distortion rigs.
I leave Q at 707.
Thanks man, can't wait to play them!
After upgrade to Operating System 8.7.10
My pure cabinet setting is always off, but if I go to "Output section" the pure cabinet activates itself with the flag. OMG!
I turn it off, I go out: ok!
I return to "Output section" and pure cabinet activates itself again!! WTF!?!?!
Somebody else?
Thanks
Thanks for the kind words, I must get round to capturing a new set of profiles of my modded Marshall.
LiamThompson can't wait!
Manual: "Some effects, such as the Air Chorus, don’t offer a “Mix” control, as this would contradict the character of the effect."
I'm not agree: a mix control can regulate the amount of the character.
Is it possible to add a mix control?
Thanks.
sorry about this guys, should be working if you try now. Please let me know if there’s any issues 🙏
now it works: I've bought 2 packs!
50% off all individual amp bundle packs using the code KEMPER50
https://mirrorprofiles.myshopify.com/discount/KEMPER50
Last sentence says: "Edit - will repost soon. Need to double check the files uploaded."
ops.. sorry!
After some trial and error I'm back again with a couple free profiles of my Wizard MTL. Profiled through a Friedman 4x12 using a 57/421 blend - 1073 preamp - SSL mixer. Both are studio profiles capturing the lead channel - profile 1 has the boost knob on the amp pulled (on) and profile 2 has the boost knob off.
Please help me, help you. Let me know your thoughts. Constructive criticism welcomed and appreciated. Thanks!
Edit - will repost soon. Need to double check the files uploaded.
I don't find them...
I know it's has been asked countless times, but I really think adjustable speed on the rotary (not binary like the real stuff) would be pretty awesome with a morph pedal control (a short adjustable transition speed would be even better)
This would really make my day
+1
External Content youtu.beContent embedded from external sources will not be displayed without your consent.Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.
Upcoming, my JCM 800 pack... just a sneak preview
can't wait!
Thanks. Sounds great.
I agree, thanks!
I have it: it's expensive, but it's absolute top!
you could add a new function in the amp section: "saturation" to increase the distortion without adding an OD that changes the original sound.
Compare a Super with volume at two to the same amp at ten. It sounds like coloration to me. In fact, isn't that the whole point of profiling an amp with different gain settings? If the gain of the profiler was about as neutral as most tube amps then there wouldn't be a need to profile across the full gain range. I must be missing something here.
that's right!
Play any rig with gain 6 and try to turn up to 7 or turn down to 5: in my opinion the Kemper's gain works well when I turn it down, while when I turn it up it doesn't give me the saturation I would like to hear.
Saturation/distortion gives a different result than a volume booster.
I doubt, when trusting my ears. What Kemper states maybe right in a very technical view. I always found when increasing gain a remarkable lost of tone clarity and especially a lost of the characteristics of the profiled amp. After all, distorted or heavy gain profiles tend to sound the same: mud, especially when played loud in a band context.
From another tone experience: using above mid or heavy gain profiles and decreasing the gain level always leads to are real amp tone .
Just my ears...
I agree.
I have been using the kemper for many years and I've found the gain function a weak point: in my opinion it works more like a boost than a real drive.
I find it more satisfying to use a rig with more gain and turn it down than try to turn up a rig with less gain.
With the gain I' ve increased the Distortion Sense, the Power Sagging, the Tube Shape... BUT the result was disappointing.
I think the gain function is very important and they should improve it.
This is only my opinion with my tweaking experience.
on deck to profile:
Bogner Ecstacy 20th anniversary
Bogner Shiva 20th anniversary
Can't wait!
Display MoreCalled:
Marshall SL-X 01 (straight into amp, no pedals or pre-boost) , try the Kemper Drive!
Marshall SL-X 02
Marshall SL-X 03
Marshall SL-X 04
Marshall SL-X 05
User: KillDivision
02-05 have different Boss RGE-10 settings as a clean boost, also different IR´s in the Two Notes Torpedo Live.
I aso used the free IR´s from Catharsis, I believe these are from 2009 but still rule!
If you feel there is too much bottom end, check the Studio-EQ and change the highpass to a higher setting.
Cheers from the Netherlands!
Love this amp: I'll try for sure!
Can you make some DI profiles, please?
But I absolutely understand that they sound too dark and boxy standalone at low levels. I will make some brighter ones this week, but they will not be bright, they will simply be a bit brighter than this one
Yes please!
A Version 2 of my '74 SLead is on the short list, and will include merged as well. Jan 13th 2016
Hi, the first Slead '74 is amazing: IMHO best Slead pack ever!
How many times for the 2° pack?? Please!