Hi Jimi, I've purchased these profiles and didn't receive the mail with download link. I sent you a message on contact form on your site. Thanks!
[UPDATE]
Solved! Thanks JimI! Great profiles!
Hi Jimi, I've purchased these profiles and didn't receive the mail with download link. I sent you a message on contact form on your site. Thanks!
[UPDATE]
Solved! Thanks JimI! Great profiles!
great idea +1!
Panel with parameters for Lock , Output Link and Master Volume, Reverb Section and Delay Section for all KPA panel creators out there:)
I will implement thiss parameters to main editor in few days.
https://www.dropbox.com/s/34wwl3uieuebitm/KPA Out sections_1_0_subpanel.rar?dl=0
[Blocked Image: https://www.dropbox.com/s/l53geubm2qy2syd/KPA_Link%2BLock%2BRev%2BDly.png?raw=1]
Great!
A new version of KPA Panel it is available. There are 2 new pages into Output section for monitor out eq and main output eq (thanks to DamianGreda for parameters). There are also some little bugfix.
I hope you like this.
https://www.dropbox.com/s/opl4reocfgllglx/KPA Panel_0_2_Moon.zip.zip?dl=0
We are proceeding by reverse engineering KPA midi implementation. It seems that everything (99%?) on KPA can be managed via MIDI commands.
You are right, official docs can save us a lot of time and mistakes but probably they are not ready for support an "open source" approach for 3rd party sw/hw editors. I hope that it is only a matter of time.
At the same time working on this things in this situation it is a kind of "nerd adventure"
Thanks! Thanks! Thanks!
New KPA editor panel (still a concept but it is usable). All new graphics (designed from scratch using Inkscape) and navigation. Now the display switch from Input, Amplifier,EQ, Cabinet and Output wheen mouse pointer is over corresponding button. Mouseclick swith On/Off the section. <Page> putton swith next and previous page of a section whe available. Exit button swith on main/EQ screen.
Data retrive from KPA it is not yet implemented. I need to complete stomps and effects and some other things (by the way I need some parameters to complete Output section with Monitor and Main output Equalizations)..
This panel require a lot od LUA code to switch on and off Knob/Labels (CTRLR modulators) so you could find some bugs. Then pay attention to use this panel. If i can I will made some coding optimizations in future.
[Blocked Image: https://www.dropbox.com/s/m2r6x0jp3zaygyj/Panel.png?raw=1]
https://www.dropbox.com/s/opl4reocfgllglx/KPA Panel_0_2_Moon.zip.zip?dl=0
@Sandokan71 Wait till I finish this I added multi-message so if you select stomp automatically it will send type harmonizer to this stomp.
Im writing scripts right now to retrieve scale name end set the scale name:) Thanks to point me out how to use one element to change sysex message of the another:)
I'm started to thinking how to add user scale interface based on fretboard ....
https://www.dropbox.com/s/km3l…Scales_1_0_1.0.panel?dl=0
[Blocked Image: https://www.dropbox.com/s/a9qumiybeibaoge/HarmonizerEditor.png?raw=1]
No problem to wait... Now I'm drawing new interfaces
here you are:)
We could also add a list of predefined scales:)
https://www.dropbox.com/s/km3l…Scales_1_0_1.0.panel?dl=0
[Blocked Image: https://www.dropbox.com/s/e6ijj2h944slykt/UserScales.png?raw=1]
Great!
[quote='Sandokan71','http://www.kemper-amps.com/forum/index.php/Thread/19728-KPAEditor-Community-Project-vst-standalone-win-mac-linux-based-on-http-ctrlr-org/?postID=221789&#post221789']... we could create a functions to re answer a KPA from desired parameters, and initialize all modulators when the panel is opened - or by get parameters button.
This can be really useful. We can built a set/library of standard LUA functions/objects to be used on KPA panels. In my panel there are some functions to convert 0-16383 values into units (db, % and so on). I keep this idea from your panel. We can make some standardization for these functions (a good naming convection it is also needed). I need to spend some time for mapping volume parameters in db (my first attemp was good but not perfect). Also I made a simple function example to map parameter's value in LUA code using knob instead of pick list like KPA user interface (this is not really user friendly but can be useful). This function can be written better...
Also we can define a standard naming convention for modulators...
After it is only a matter of graphics...
About parameters I need... For example can be really useful to have a panel to setup user scales for harmonic pitch.
While waiting official informations or some reverse engineering tips I'm spending my time thinking a really user friendly interface. If there is anyone that can give use some templates...
For example the GUI published by Virango was really nice.
Can you post links to the same overwriten file in your drop box (for example KPA Panel_0_2_Moon.zip) - then i will put this under you name to the OP and always there be an actual version:) ??
Ok! At this link you can find every time last version: https://www.dropbox.com/s/opl4reocfgllglx/KPA Panel_0_2_Moon.zip.zip?dl=0
Thanks to you.
New version with output volumes. Still usual reccomendations about keeping safe your data making a backup before to use this software.
https://www.dropbox.com/s/cquu1gb7d093lzb/KPA Panel_0_2_Moon_2015-04-20_22-27.zip?dl=0
Anyway this project still a concept.
It is available bugfix release of KPA Panel/Editor. Still usual reccomendations about keeping safe your data making a backup before to use this software.
Release notes:
- fixed RigUp/Down now just one click instead of two it is needed to swith to following/previous rig
- as suggested by Damian each modulator's "CustomModulatorIndex" property is filled up with NPRN value (base 10). This allow much easy implementation for retriving data from KPA.
- note: master volume act on KPA's Main Volume
https://www.dropbox.com/s/726qpqv62jb8ai2/KPA Panel_0_1_Moon_2015-04-19_19-55.zip?dl=0