Unfortunately, no, I had already done those.
Posts by walkerjerry
-
-
My interface only has 2 outputs, so my DI track is routed to one, that goes to the Kemper. The incoming wet track is routed to a track with no output, so as not to create a feedback loop.
The Main out is on Master Mono.Having said all that again, the problems isn't in the Kemper. My DI does actually get processed; if I monitor with headphones directly from the Kemper, I can hear the processed reamped signal. The problem is when I plug the Master out back into an input of the interface, the feedback loop is there, or a signal that sounds like one. I'm not sure why, I have only the dry DI track route to the output, and the reamped signal from the Kemper to an input that is route to no output in the DAW.
The only thing I can think of now, is that this interface is unable to separate the inputs from the outputs at all, so routing it correctly in the DAW is futile. -
Yeah, that's why I'm confused. The routing is correct. The dry signal makes it through the Kemper, it just doesn't get processed for some reason. It must be my interface or something. I'll try just a guitar through the interface and then out to the Kemper, and see if that is the same.
-
Guitar actually is processed normally when plugged directly into the Return Input...
-
Thanks anyway
-
It works fine when I play guitar through the front. I can even record a Wet & dry track simultaneously with no problems, using the normal methods. It's only when trying to reamp the dry DI track that I have this problem.
-
Master Mono
-
I'm using the main output to the interface.
-
Don't have Studio One and reamp throu spdf. But have you set up Studio One correctly? Using the right audo channel? I'm using Cubase and a SPL Crimson soundcard and it took me a while to firgure out how to set it up for reamping.
Yes, it is set up with the correct channel.
You can use the kemper as a DI box you know ?
Of course, but that isn't what I'm talking about.
-
So I'm attempting to reamp a DI track I have in Studio One, using an AudioBox 22vsl. I have all my routing set up correctly, but I'll go over it anyway. Since there are only 2 outputs (no spdif), I'm using headphones to monitor it for this.
DI track to Sub1 L output - Return Input with Return Input Reamp selected - Main out to Input of Audiobox - Reamp track record armed with the correct input from the AudioBox
For some reason, the Kemper isn't reamping the signal with the amp tone, I can only hear the dry DI track no matter what. The reamp track is recording, but there is no actual audio information on it. I can't figure out the problem here...
The signal IS getting into the Kemper - I can plug the headphones directly into the Kemper and still hear the dry DI.
-
Package deal with:
• Kemper (non-powered "toaster" version). Includes 400-500 commercial & professional profiles. Includes original manuals, etc. Not mint, but nearly.
• FCB1010 Midi Controller with the Uno4Kemper chip installed (I have the stock chip also), and 2 10' cables. Has a small crack in one of the plastic corners, pictured.
• Road Case made for the Kemper, with extra compartment (the tape labels come off the case, obviously). Routine wear.
I prefer to sell all this as a package, and have priced it at a great deal, accordingly. If you want JUST the foot controller or case, we can discuss it.
NO TRADES. CONUS only.$1640 shipped
[Blocked Image: http://i64.tinypic.com/2qs5mo6.jpg]
[Blocked Image: http://i65.tinypic.com/2rc6e4g.jpg]
[Blocked Image: http://i63.tinypic.com/qq78l4.jpg]
[Blocked Image: http://i68.tinypic.com/2ujs292.jpg]
[Blocked Image: http://i68.tinypic.com/2i1m4io.jpg] -
Found. Thanks
-
Will you sell just the Remote?
-
What do you mean by "adjusting the loop return volume?" Are you talking about the Volume control parameter in the Loop slot? Adjusting this did not help my problem at all.
Also, there is a "Distortion Loop" if you're running the effects you describe in a loop; I only run Mod/Delay/Reverb in a normal "Mono Loop." -
I don't know, but thanks for the replies.
-
Usually I run a small pedalboard into the front of my KPA, but whenever I try to run effects in a loop (X slot, mono), I have this unwanted distorted noise that gets added somehow. I've eliminated potential cable issues, effects loop Vol is at 0, Mix is 100%, adjusting these does not change the unwanted clipping. When I put the whole board through the front, there is no problem, only when using a loop. Am I missing something?
-
The main reason I originally got a Kemper was because I always use in-ears, with amps mic'd up off stage. I use ATH-M50's at home to dial stuff in, and 1964 quads live, sounds great.
-
Great idea, and it worked! Thanks for the suggestion!
-
Sorry, I'm not equipped to give a sound clip right now.
-
It is the same with Space on or off. The effect is much stronger than that, and is present on all the profiles. Would 1 corrupted profile effect it globally?