Posts by Louderthan555

Quote from Burkhard

What you describe is unfortunately a broken Ethernet socket at the PROFILER. If the socket isn't broken, it ensures reliable contact. Ethernet connections are a global standard. A cable tie can avoid that the socket gets damaged, if somebody stumbles over the cable.

Appreciate for your response. I agree that the ethernet socket is somehow broken, not by me lol. Was that way when I purchased the KPA, and is therefore a factory warranty issue that they choose to ignore. This connection seems to be a weak spot on the KPA. A cable tie 'band aid' solution on a $2k plus system seems rather inappropriate, to say the least. Found this far more robust solution: https://britishaudio.com/products/kemper-profiler-mod

though this might not work for my KPA toaster with Ritter power amp installed.

Having the same issue ever since I've had the KPA and the remote (bought in 2015). Noticed that the ethernet jack moves back and forth inside the KPA ethernet port. Shoving it all the way in makes the connection. I tried buying an Elite Core ProCatSE 20 foot cable hoping that would have tighter fit than there flimsy cable provided with the remote. No go. I got in touch with Kemper repair and they told me to send it in. The charge was around $250 for a new board to be installed in the back of the KPA. I pointed out to them this is a factory issue and should be treated as such. Again, no go. I did however find a funky but effective temporary solution - gaff tape on the edges of the ethernet jack. Makes for a snug fit, but hardly an elegant or permanent solution. Very disappointed with KPA repair.

+1

Clear/delete performances by selecting/highlighting the performance, then hold Command key and press the Delete key.

Thank you Paults! Not were I would have put or expected them but this will make things easier. Appreciate the help.

Uploaded Rig Manager 3.0 When editing effects, I only get one effect preset. I'm not seeing any of the many presets that I see when editing from the Kemper itself. What am I missing? Thanks for any help.

Use your main output, (stereo or mono), or the SPDIF output, (stereo or mono). All this can be found in the Kemper OUTPUT section. Speaker IRs help get an organic sound also. M Britt has some very good ones. ML Sound Labs also. You can load IRs via your Kemper initialized thumb drive. Put the IRs in the SHARED folder and the Kemper will prompt you on loading them. With different IRs, one can really fine tune a profile. I swap IRs before I touch the Definition control. Good Luck!

The existing Studio EQ in place of the four band Monitor EQ. Would be so very helpful! +100000

Mine has started to do the same thing. The Kemper seems frozen and needs to be unplugged and re started. Re load the operating system?

+1!

Would like to see ability to place other aready existing EQs (like the Studio Equalizer) in the Main output EQ and MonitorEQ output slots. The existing 4 band EQ is very limiting when trying to get guitar speakers to sound like FRFR/FOH/IEM systems.

Thank you Paults! Tried that already, and still not getting all the listed profiles. Specifically: TAF - Fairgain the King, and TAF - Fairgain the Queen. Could I have too many profiles loaded? My KPA has the standard facory ones plus the M.Britt and ACE profiles.

I've had my KPA for about a month. Why did I wait so long? Anyway, I'm noticing that my KPA does not have all the profiles that are in the factory content list on the Kemper web site. I am running the latest Kemper Profiler Operating System 2.7.4. Any help would be greatly appreciated.

Was wondering how users do the stereo out thing to FOH, and a stereo monitor mix with the built in Kemper amp? Also, anyone using the after market camper amp module? Thank you.

Up samplers? Tell me more. Many thanks !

Am ready to get a KPA but it's lacking three key features that are preventing me from taking the plunge! Anyone else feel this way? Am I missing something? I've heard and seen what a great unit this is. Just wondering about the following. No disrespect intended! I know it's not easy to design, build and market a box of this complexity.
1. No sp/dif out higher than 44.1. Needs to be at least 96. Can't use KPA as master clock. Most pro recording is done at higher resolution than 44.1. The KPA is supposed to be a pro recording solution. Analog outs into digital interface means an additional step of a/d conversion. Anyone using the KPA in this way? how's it sounding?
2. No librarian for Mac. Coming but when?
3. No live foot controller solution. Coming but when? I know other controllers work so not a huge deal.