Für mich vollkommen Ahnungslosen: Wozu muss man zwei KPA verbinden? Was kann man damit machen?
Posts by tomster
-
-
Thanks Wolf!
Got it working. Just be sure that the KPA is switched on and fully working before starting RigManager. -
Can't get the update to work
-
I'm using:
https://www.thomann.de/de/cordial_cpds5_cc_spdif.htmKeep in mind that you'll need 2 of those.
-
Der Seymour Duncan Custom (SH-5) hat recht kräftige Bässe und wird in mehreren Foren als PU für Les Pauls gelobt.
-
-
Very intersting and well done!
-
-
Thank you!
-
Not too loud. The amp was in the living room of my apartment.
-
Dear Kemperites,
i made some profiles of my Orange Tiny Terror that i'd like to share. Short clips are available on Soundcloud. The guitar playing is... well, sub-optimal but should be good enough to give you an impression.
Profile No. 1 - Mostly clean / Bridge PU
Profile No. 2 - Mostly clean / Neck PU
Profile No. 3 - Full gain / Bridge PU
Profile No. 4 - Swedish Lead / Neck PUProfile No. 5 - Pushed / Bridge PU
Profile No. 6 - Pushed (with EQ) / Bridge PU
Profile No. 7 - Pushed / Neck PU
Profile No. 8 - Driven / Bridge PU
Profile No. 9 - Driven / Neck PU
Detailed technical information is included in the attached zip archive.
The profiles are made without any effects (except no.4) so throw in reverb, delay etc. as you wish.I'd appreciate hearing your comments (no comments regarding my guitar playing, please )
Cheers!
Thomas -
2.0.19.12893 installed and it crashes every time
-
Thanks for sharing!
-
@ Tychomusic: I tested both options, the Hi-Z input on the front panel and the line in on the rear panel. Using the line in the profiles sounded better to my ears and using the Hi-Z often resulted in distorted profiles and clipping during the profiling process. I recommend you try both options too and choose the one you like better.
-
Schon erledigt! *schäm* Manchmal sieht man den Wald vor lauter Bäumen nicht...
joerch: Dank für die Antwort!
-
Hallo!
Kann mir vielleicht jemand erklären, wie ich Presets für Stomp Effekt speichern kann?
Ich möchte mir gerne verschiedenen WahWah-Presets basteln, weiß aber nicht, wie ich nur das FX-preset speichern muss, um es in beliebigen Rigs einsetzen zu können.Ich habe es mit der Anleitung aus dem Wiki probiert
QuoteQ: Is it possible to save stomp setups? Like if I set up a
specific flanger, can I save it under some name so I could use it again
in a different rig?A: Yes, you can save the whole current stomps or effects
configuration as a single preset: press and hold Stomps or Effects and
press Store. It will ask you whether you want to save the setup or the
rig. You can have Stomps presets and Effects presets.
kann danach allerdings das Preset nicht finden.Vielen Dank für die Hilfe!
Gruß,
Thomas -
Is there actually a difference between the free MW profiles and the commercial ones?
I find that very often the free giveaways give you a nice impression but are not that good or let's say no to my taste. Which kind of makes sense because otherwise i wouldn't buy commercial profiles...
Regarding the free MW profiles, i like them but not enough to convince me buying one of the packs. -
-
I just accidentally deleted a rig in Rig Manager. I thought i was editing the tags of the rig and pressed DEL and whops... the rig was gone.
Gladly i had a cop of that rig but, as this can happen very easily, i am wondering if there is a way to restore a rig that was deleted accidentally in Rig Manager?Best,
Thomas -
I made some profiles of my Orange Tiny Terror.
It's basically a clean, a pushed and a crunch profile. No high gain stuff...Amp: Orange Tiny Terror (at 7W)
Cab: Mesa Boogie 2x12 Roadster
Mic: SM-57
Guitar: Fender Stratocaster Vintage '65
Pre Amp: UA LA-610You can download the proiles here:
https://www.dropbox.com/s/g9j11y552k9lwy4/Orange TT.rar?dl=0Have fun!