That should be not a technical problem. If anyone has taken a look inside a Kemper he would see
that there is not much hardware in it. So all components could be easily build into a floorboard.
But think of this:
The Kemper is a wonderful invention but don't you miss the look of an old amp and the smell of
valves and the wind coming out of 2 4x12 inch boxes?
Now we only have a thing called toaster and if this not necessary because we have a floarboard
and nothing else what could we see and feel on stage...
In 5 years you can pack a Kemper inside your guitar and concerts will look like a full-playback-tv-show.
One tear for all the old amps (i have hundreds in my Kemper now ,-)
The future will never stop...
Posts by hal2000
-
-
Unfortunately i don't have this software anymore. But you can download a trial and make a profile.
It's not the really good behaviour but if you only need the Plexi... -
Hi Kempers,
enclose you find some Profiles of the TC Classic 450. There are Studio Profiles, Direct Profiles and Merged Profiles
of the TC Classic 450 with TC 2 x 10 Cabinet and same Amp with EV 15 cab. -
Page 2/6 in the Outpu Menu. You can link the Headphone Volume to Main Volume or disable it to
control the Headphone Volume separately.
I think you have to spend some time with the Reference Manual... -
Very good idea to do so. Very nice playing. Just put my LED-chain on the wall
Thank you for sharing this.
You recorded it last christmas? It sounds better than "Last Christmas"! -
I never played a custum deluxe. So i can't compare. But it sounds good.
Thank you for sharing! -
No, the Headphone Out is a copy of the Master Out. But you can configure the Outs as you want.
So a solution could be: Configure the Monitor Out as "Stack" (no Effects) and route the Monitor Out
with a separate cable in Apollo and then in Cubase Cubase on the left side of your Headphone.In your Apollo you only have to set the Sample Rate of 44,1 Khz (only needed in combination with SPDIF).
You can set the resolution of 24 bit for example when you export your record out of your DAW. -
You have several options in the output menu. There is the section "SPDIF" where you can choose for example
"Git / Stack". Left channel is the dry and right channel the wet signal that you can simultaneously record in your daw
onto 2 different tracks.
Please keep in mind that for SPDIF processes you have to set your Apollo as slave and 44.1 kHz (24 bit), because Kemper has always
to be the Master. -
You can record 2 signals from Kemper at the same time via SPDIF. For example the clean signal on the left track and the effect signal on the right.
Many Kemper users do this to have the advantage of reamping the raw signal later.
But i've seen that your Apollo has a Toslink connector. Kemper has only a Cinch (Koax) connector.
So i think you need a Cinch to Toslink Converter for SPDIF using... -
The UAD Apollo has a optical SPDIF. DO you have a converter from Cinch to optical?
What is your setup? From Kempers Main Outs to MIC/Line on the backside of the Apollo?
You should use this and not the Guitar Input at front side because you need Line-Level.
Did you disable Apollos Processing Unit (EQ's, Effects ...)
So please tell us about the whole setup, used cables an so on for better understanding. -
Some Looper functions are missing in FCB. And you need 2 Midi cables to get advantage of tuner and so on...
-
Good job! Very useful for practising guitar AND tweaking the Kemper to our old vintage sounds...
Next time catch your mic and do the vocals too on "message in a bottle".
Then it would be perfect.
Thank you for sharing! -
Welcome to the club and have lot of fun while looking the Kemper under his kilt...
-
Some Acoustics would be fine...
I will do a Green Audio with Green Audio Cab (hope this year). -
Dear Acoustic Fans,
i made several profiles of a Acoustic 220 with 402 Cab. You can get it here:
https://www.kemper-amps.com/fo…avorite-amp-manufacturer/ -
Trace Elliots you can find in Rig Exchange
https://www.kemper-amps.com/rig/exchange -
Hi Guys,
this is one of the best Plexi Simulations i've ever heard. It is a Scuffham Plexi Simulation.
A "must have" for all Plexi Crunch Fans.
Please check it out. It is amazing.... -
Thank you! For me it works good without any effects or EQ's...
-
Hi Kempers,
enclose you find a new Bass Rig of the Acoustic 220 with 402 Cabinet (2 x 15"). The zip-file contains a
Studio Profile a DI Profile and a Merged Profile.
Have fun... -
Das stimmt. Ist bei mir auch so. Aber du kannst die Profile ja direkt über den Rig Manager laden.