Thanks, that did the trick!
Posts by Bronchick
-
-
So which output do I use?
-
I have output going to the Kemper Kabinet. Set to Master Mono.
Are you guys saying I cannot run the powered output to the Kemper Kab with the speaker imprint?
-
I am getting no output to the mains - is there a setting I am missing?
-
And I get nothing when running out of the main out into the Kab
-
Oh, I did not realize that. But if I run out of the speaker out, don't I lose the speaker imprints?
-
I just got the powered toaster and when I go out the mon output with the power amp off into a powered speaker, it works just fine. When I turn the power amp on and go into the Kemper Kab, I just get a very low-volume, distorted output.
Could the power amp have a problem?
-
Blend two imprints
-
I use a the Kemper Kabinet with the floor model and the EHX Powerstage in my condo. You can get great "amp in the room" tone without the neighbors complaining.
-
It seems like the Kemper Kab only gives you 1x12" options. Having a 2x12", particularly with two different speakers would be nice!
-
Is there a way to have the Kemper Kab settings go through the monitor out and keep the regular cab sims going out the main outs?
-
Ii use the GLDX receiver mounted on a pedalboard with the Stage profiler and TWO packs for different guitars. Works like a charm so long as only ONE pack is turned on at a time. You can do up to six, according to Shure. Never had a dropout.
-
Good point! I really don't do FOH much, I go into a Xitone cab, but I'll keep that in mind when going direct.
-
To some of you this may be a big "duh", but I thought the expression pedal could only be used to control the INPUT volume like a traditional volume pedal, which is like rolling back your guitar's volume. As you may know, this can reduce the input gain and change your tone.
BUT, you can set it up so it controls the overall OUTPUT volume, as if you were turning the big output volume knob, which does NOT affect tone. You can set it to BOOST volume (ie, when the pedal is rolled back it's normal volume, when rolled forward it increases volume) or to drop volume (the opposite).This is HUGE if you play live and need to tweak your output volume during songs, solos, fills or just to balance it out when you switch between rigs (or when your bandmates keep turning up!).
The disparity in volume between rigs was always my biggest complaint about modelers, but Kemper has now solved it! -
No, having probs in browser mode intermittently now, too. In performance mode, it works at first, then doesn't, but when I click the other buttons a few times and go back to button 1, it will work most of the time. Is there a place I can ship or local dealers that can look at it?
-
Weird, seems to work now, but a few times doesn't, intermittently. Could this be a hardware issue?
-
Yes, and rebooted it several times. Might be a hardware issue, where do I go from here? It's the Stage profiler, by the way.
-
I downloaded and installed the newest OS, and all of a sudden, button 1 doesn't engage the rig in performance mode. All the other buttons work fine. Also works fine in browse mode, though. Anyone else have this issue?
-
Thanks - what's the deal with production? There's obviously a demand for the cabs, but they've been out of stock for months!
-
Ahaaaaaaaaa.... thanks.
But, did speak with the dude at Xitone, and he said there's no issue with repurposing it into a regular cab. FYI, he said he makes active cabs, but doesn't have it on his website.