Posts by reneguitar
-
-
-
Looks awesome!!! How do you cut out the foam so well? I imagine that this would give me a hard time :-/
Oh no, it's easy because it's pick n pluck foam. You just have to pull out the little cubes
-
Humungous man!!!!
Haha yes it is, but it has wheels and you just have to walk once
-
Here's the Peli Case 1640: Kemper, Remote incl. volume pedal and extra switches, iPad, all cables, "emergency case" with spare-cables batteries, strings etc, Line6 G10, switchboard (5) for bluetooth functions on iPad.
It's kind of heavy, but you can use the case as a table -
+1 for me
-
I mostly use the DXR 10 for on stage monitoring. But sometimes I use it as guitar 'cab' in small venue's and during (loud) rehearsels.
It has enough power to compete with our drummer and the other guitarist (Marshall). -
it actually fits. Compresses the foam on top and bottom pretty good, but the lid will close tight and snap.
Super! Thanks for the info
-
Nice! Would it be possible to put the Kemper upright?
-
-
I'm following this!
Great idea -
-
-
It's solved!
I have to set in the System Mode, both switches to „Polarity: Inverse”, although they are normally open switches,
And, that’s what I did not at first, I had to CALIBRATE the switches in the System Menu.
I thought that you only need to calibrate (volume)pedals… -
Thanks,
@Sharry : I have two pedals connected to te remote: a volume and a wah. But they have the total range.
@Hurricane : The changing of the polarity works only for the Looper problem. But not with te tuner...
By the way when I start the Kemper with the Chicken knob on tuner, then the Kemper starts with a profile of the Browser
-
since OS 5.1.1 (and now on 5.2 also):
When I start up the Kemper, it's shows for 5 seconds the normal performance but then the Tuner appears. When with I switch off the Tuner (with the connected switch), everything works normal.
Can I change this to start up in Performance Mode?I have the Remote connected to the Kemper.
On the connector "pedal 4" of the remote I have connected two switches with a stereo cable.
The 2 switches are normally open.
The ring of the stereo connector is assigned as "Looper Mode" and tip to "Tuner" in the System Menu.Polarity of Looper Switch: reverse polarity (otherwise I start in Looper mode...)
Polarity of Tuner Switch: normal polarity (when I choose reverse polarity: the switch doesn't work at all...) -
since OS 5.1.1 (and now on 5.2 also):
When I start up the Kemper, it's shows for 5 seconds the normal performance but then the Tuner appears. When with I switch off the Tuner (with the connected switch), everything works normal.
Can I change this to start up in Performance Mode?I have the Remote connected to the Kemper.
On the connector "pedal 4" of the remote I have connected two switches with a stereo cable.
The 2 switches are normally open.
The ring of the stereo connector is assigned as "Looper Mode" and tip to "Tuner" in the System Menu.Polarity of Looper Switch: reverse polarity (otherwise I start in Looper mode...)
Polarity of Tuner Switch: normal polarity (when I choose reverse polarity: the switch doesn't work at all...) -
I think I have the same problem:
OS 5.1.1
Remote connected.
On pedal 4 connector of the remote: stereo cable with ring to switch the Looper Mode and tip to switch Tuner.
The 2 switches are normally open.Polarity of Looper Switch: reverse polarity (otherwise I start in Looper mode...)
Polarity of Tuner Switch: normal polarity (when I choose reverse polarity: the switch doesn't work at all...)When I start up the Kemper, it's shows for 5 seconds the normal performance but then the Tuner appears. When with I switch off the Tuner, everything works normal.
-
Would be nice!
+1 -
I now have the three Bert Meulendijk packs (pack #1, pack #2 and the acoustic pack) and they are all of an outstanding quality. Good for live playing and recording. Although the sounds are very diverse, they all sound prominent in the mix. Now I've heard that Bert is working on a pack for bass guitars... That would be great for me to also cover that area.