Posts by Daz-lp13

Quote from FreakOfNature

I think I'm going to pull the trigger on one of these bad boys. For those of you using it currently with your Kemper. How are you running it? Is it in your chain BEFORE the Kemper completely as in: Guitar plugs into FreqOut then FreqOut's output goes into the Kempter or are you running it some other way? I would assume that if you run it PRE Kemper then using Kemper's Noise Gate won't case any issues with the FreqOut because the Kemper will just detect the feedback as a guitar signal and not kick in I hope?

Hey I have one of these and love it, very cool pedal, it says to put it as close to first in your chain(guitar-freqout-other pedal-amp/kemper) but i use it after a whammy because it will change the pitch of the feedback aswell, lots of fun, when u get one experiment with placement and find what you like

Just as the title says , what do ye guys think is the better/best cabs availble to use in the kemper,
I current use one of the tonehammer defaults in the kemper and wondered if ye found some that you always seemed to use the most

Sounds great, well done

No pressure mate
, just wondering if the studio profiles had the same issues as the direct ones

How do studio profiles sound from the amp , do they still have the same sound issues?

The way rabea and martin kidd designed the amp was ch 1 was based off his marshall jvm and ch 2 was based off his 5150, so he could have the best of both worlds

Great I have been waiting for some one to bring out some profiles of this amp, I am a very big fan of rebea and chappers, did you get the 6L6 or el34 version? preordering as soon as i can

PRS Archon?

Hey guys just wondering if any of you have some suggestions for some clean profiles i could use to try out some overdrive/distortion pedals, after i got my kemper i sold my old amps(after profiling of course) but the clean profiles dont mix well with my pedals in the front of the amp, any help would be greatly appreciated.

Hey guys I use a 535Q and love the sound, my settings are range in the 3rd position from the top with the gain and Q turned all the way up, is there anyone that can help me with the setting for my kemper.
Thanks

Hey just got these profiles and they are fantastic sounding, very usable and sound great through my monitors and real 2x12
Cant wait for your next amp profiles.
p.s Are you still planing on doing a JVM pack at some stage?
Great work as always guys!!!

Hey guys i was just listening to some songs and these guitar effects really stuck out to me. i would love to have a programmable step sequencer and that effect thats in the RHCP song throw away your television solo, i know he used a line 6 fm4 for the effect.

Thanks for the heads up

Revv Generator series
Panama amps series
Victory VX Kracken
and hopefully the mesa boogie mark jp 2c when released

Hey just found this from another forum"Recorded with John Petrucci Ernie Ball Majesty 6 & 7 string guitars
with DiMarzio John Petrucci Illuminator pickups into a Mesa 4x12
Traditional Straight Cabinet with Celestion Vintage 30s. Mic’d
with a Mojave FET 301, Royer 121 and Shure SM57, into Neve 1081 preamps
and bussed to a channel into an SSL Duality 48 console. Delays
and reverbs are a TC Electronic 2290 and a Bricasti M7 Reverb.
Engineering by Rich Chycki. Recorded at Germano Studios, NYC, November
11, 2015."
Now we know what mics he used for the demo.

At least now we have his setting from the demo for someone to profile, whoever is lucky enough to get one!!!
ToneHammer im hoping you will be able to do the amp justice just like you have with your other profiles.

i cant wait until we get some profiles of the new pettrucci signature amp, its advertised as the c+ with 3 channels and two separate 5 band EQs

Quote from Deadlightstudio

Coming soon 5150 Mk1

Hey im still loving all of your profiles , the sound huge, any chance of some mesa mark 1/2/3/4/5/5:25 series profiles in the near future?
will definitely be getting the 5150 when it comes out

Quote from viabcroce

Pre-post FX?

just tried it , if you go to page 3 of your rig settings and set the location of your volume to post effects it will cut off the trails when you lower the volume pedal

I could be wrong but i think if you use an expression pedal for volume you can set the volume to be pre/post stomps and i think it will cut off the trails when you lower your volume.
im at work at the moment so i cant test it out right now