by the way, isn’t it for gordius midi controller? is it working with fbc1010 aswell?
sorry, I made the correction...
by the way, isn’t it for gordius midi controller? is it working with fbc1010 aswell?
sorry, I made the correction...
Display MoreI seem to remember someone asking basically this question about the UNO chip, not the Uno4Kemper one.
I think the conclusion was that you would have to manually program the FCB1010 yourself.
Found the thread : Uno Chip v1.0.4 for Behringer FCB1010 setup
Here's the user's guide : https://www.fcb1010.eu/downloa…_UnO_v1_0_4_UserGuide.pdf
I would second Burkhard 's recommendation, if you can, get a Kemper specific chip. I have the Eureka one and it is fantastic and I heard the same about the Uno4Kemper one.
before buying the remote, I used for about 1 year the solution, uno (not Uno4kemper) + the software up suggested.
Hi Zeezzou,
i suggest you to download this app: https://www.fcb1010.uno
then try one of my presets and make the appropiate and personal mods.
https://www.dropbox.com/s/hx6mwqv3tlr0x4o/Kemper.lgp?dl=0
https://www.dropbox.com/s/8enr…kr/Kemper%202018.lgp?dl=0
Gian
Thank's alot to both, i really appreciate your feedbacks.Cheers
Hi,
I use this DI for all my Direct profiles and works well, very cheap but linear.
http://www.samsontech.com/sams…ors/s-class-mini/sdirect/
Gian
ci puoi postare la foto del display con i parametri out?
Figurati, di nulla!
Ciao 7,
qui hai gia parecchio da leggere:
https://www.accordo.it/article/viewPub/77467
https://www.accordo.it/article/viewPub/74870
https://www.accordo.it/article/viewPub/86001
Io normalmente esco dall'monitor out verso una cassa FRFR mai sopra i -18 db i rig li tengo a volume zero enfatizzando per i soli di +3 db (se non equalizzo più di tanto), mi tengo ancora un margine di +3db con il morphing.
Verso l'impianto esco bilanciato o sbilanciato dipende dal service dai -30db ai -20db.
Saluti, Gian
I've always used this method, believe me nothing is moving..
[Blocked Image: https://dl.dropboxusercontent.com/u/31390931/placchette_21_3-500x500.jpg]
Hi Roeffel,
and removing all the rubber feet and put these things?
[Blocked Image: https://dl.dropboxusercontent.com/u/31390931/placchette_21-500x500.jpg]
Boost, 3db..
Ciao Ezio ti metto due link.
Gian
I set up morphing control by an expression pedal, about +3db, so i can regulate the increasement of the volume just of what i need, from 0db to 3db or more if you like.
Thanks a lot friends, I really appreciate you like it!
Rode Nt1000
Bene se ok...Noisegate?Controlla che non sia attivo...
Bè effettivamente...
A me lo fa anche con la versione "Head", se per pigrizia lascio l'interruttore on della cassa e li accendo contemporaneamente (KPA e DXR10), credo sia normale quando si accende un apparecchio elettronico purtroppo la cassa passiva non la puoi spegnere