I had the same problem at one point, until I found out that if you move a delay in another slot than the dedicated one, the spillover function doesn't work anymore.
Did you check that?
Posts by Neoland
-
-
I understand it's also possible to import your own samples. Has anybody done this? How many layers can you make for instance.
Although I ditched EZ drummer 2 (didn't like the way the program worked outside of a DAW) and got back to my trustworthy Superior 2, I'm tempted. -
Check this, a fast and simple, arpeggiator as main riff, made with the pitch delay mode.
-
Stageclix, no problems whatsoever!
-
Gert Jan,
When reading all above I'm getting a little dizzy.
Maybe this will help you.
In performance mode you have to send two messages.
First up a control change message #32 0 and second a program change (which can be seen in the screen on the left).In the manual it states: Rig in Performance 1, Slot 1 loaded by bank select LSB #32: 0 program change 0
Rig in Performance 1, Slot 2 loaded by bank select LSB #32: 0 program change 1When you reach performance 26 Slot 4, you change the control change number to 32 #1 and program change 0 (again)
In the manual it states: Rig in Performance 26, Slot 3 loaded by bank select LSB #32: 0 program change 127
Rig in Performance 26, Slot 4 loaded by bank select LSB #32: 1 program change 0Cheers!
-
I got one aswell, and indeed, this is a great pedal. I have put it in the loop (have the pedal out of sight in the back of my rack), and use the duck parameter to adjust the threshold when the feedback glides in.
Like Ingolf already mentioned, the rigs from rig exchange are nice, but don't sound as natural as this pedal.As my playing is horrible, I won't bother you with any soundclips
-
Hi, I'm not sure if this counts, but I put a EHX C3 pedal in my fx loop, before the amp, and then through a distorted Marshall.
As PhilAiken wrote: "Jon Lord famously used a Marshall with his Hammond".
It's sounds pretty convincing in my ears. -
-
Last night at the radioshow of [email protected]
[Blocked Image: http://www.ideaal.org/fotoboek/6590-wipe/20170322-wipe020.jpg] -
I would really like a eq section on the direct out(put). I’m using this output for my in-ears, and a little correction on the eq side, would be nice. Before you ask (the main goes to the PA and monitor out goes to a cabinet).
Further individual mute buttons on the different outputs, would also be handy. Like for instance, I like to check, as we go on, if I hear myself in my in-ears, without physical turning down the output knob of the main and monitor out (and remembering on which value it was).
Cheers
Peter -
I just stuck two EHX Mel9's in the loop of the Kemper, great pedal, and great "stringy" sound!
-
Are you using the standard Behringer or one with a chip for Kemper?
What I do know, is that there's a CC midi message (# 31) which switches the tuner on and off. -
Soundside:
Laney TI 100 -
-
-
[Blocked Image: http://www.neoland.nl/Crazy_Daisy_Barneveld_2017.jpg]
This is with Crazy/Daisy (Regular Bass)
-
-
Yes, thé AC/DC tribute from Holland, uses a Kemper(for Bass)!!
[Blocked Image: http://www.neoland.nl/Crazy_Daisy_Barneveld_2017.jpg](I confess, it's me again)
-
Quote from GAME-OF-Tones
Noticed something cool on an early page in this thread someone demo'ing using a LiquidFoot controller and able to use a FREEZE function via MIDI control -- is there any option for this in FW5.x with the KPA remote ??
This is in the manual 5.1 :
The Hold and Infinity buttons can both be assigned to one of the Effects Buttons of the Profiler Remote. Step and hold the desired Effects Button (I to IIII) while you press the "Hold" button or the "Infinity" Button.
Both the Hold and Infinity buttons can also be assigned to a foot switch that you plug into one of the pedal inputs of your Profiler or Remote.
Does this help? -
I used a H9 for a special effect (cascading 7th with feedback), but found out I get the same result with OS 5.1.
This is really great, removed the H9 from my rack for the next gig!
Thanks Kemper people, this is really awesome great stuff!