i run all my pedals thru the input and do not notice any difference from the actual amp in how it responds.
There’s some mention of komet 60 in some threads but I can’t find a profile of it. Any help would be appreciated. Thx!!!
i bought one. i had ordered a xitone a couple days before too. i'll put them up against each other and see which i like better or possibly use them in stereo.
mine is doing the same thing. same problem with the screen.
i'm also not able to get any sound out of the back of my unit any more on the monster setup.
i'm no longer getting anything on the main outs L and R. i also can't get spdif to work either.
the main outs were working, now they're not. i didn't change anything to stop them from working.
the thing is, it WAS working. i didn't change anything. it just stopped working. i will check to see if the outputs are up.</p>
i did the system-> init global but am still getting nothing from the monitor rt/left channels.
i set the firestudio to firestudio-spdif instead of master and i'm getting spdif signal now.
but that's all i'm getting. i'm not getting anything on the other 4 channels.
i'm getting the git direct and the stack.
hi, i don't think i set up the firestudio project to be a slave. i will try that.
i'll reset the kemper and see if that fixes the main outputs. thanks
hi, thanks i'll try that.
i'm trying to do the 6 outputs like in the kemper tutorial video on youtube.
i'm not getting any signal on the spdif at all and never have.
but i had the other 4 outputs setup like the video said - main output - left= delay / right = reverb, then stack and then git direct.
i did 2 recording sessions and all 4 outputs worked. now the stereo monitor outs aren't putting out any sound.
the delay and reverb mixed in w/ the stack made the guitar sound incredible on the recording and i'm at a loss as to why its not working anymore. i didn't change anything.
i push the output button and have tried changing it and changing it back to delay / reverb but still no output.
i'm trying to setup a direct recording like in the kemper tutorial monster setup with 6 guitar outputs.
i have 2 firestudio projects - 1 has 8 channels for drums.
the 2nd has 1 direct bass track and the 6 guitar tracks coming from the kemper - all direct and out to a headphone amp.
i bought a digital rca cable from amazon and hooked it up on the out on my kemper to the in on the 2nd firestudio project. as i understand it the FSP has 8 mic pre's and channels 9 and 10 are the spdif ins.
so on the 2nd firestdudio the spdif in's should be 19 and 20.
i'm not getting any signal in logic.
the firestudio is set to normal and master - if i set it to spdif the audio gets really choppy and cuts out constantly.
when hitting output on the kemper and adjusting the spdif output to - git / stack - do you have to hit anything to save this setting?
nothing comes back in the whole forum for phish or trey anastasio
i want to buy a FRFR speaker. currently running my powerhead thru a mesa 1x12 open back and it sounds amazing but i have cab sim turned off. i want to try the KPA with a FRFR speaker using cab sim.
i'm leaning towards the matrix cfr12.
which do you think is best? i usually tilt my cabs back anyway so i figure a wedge is the best shape to go with.
atomic clr or xitone or matrix cfr12?
still have this? how much are u asking?
thanks! the power rack in the gator rack case is probably 20lbs or so and the NL12 is 17lbs. that is an amazing difference from the mark III which is probably 50-60lbs and the mesa 1x12 open back which is 33lbs. i'm really excited.
thanks guys. i bought a power rack so i don't need a matrix amp. i had a gt800fx that i used with my 11R. i was surprised that it was not very loud. 400watts i thought would be very loud. the KPA power rack 600 watts is very very loud. i had sold my matrix so i figured i'd get the power rack since its an all in 1 unit and very light.
trey or phish tones?
thanks, i ordered a remote and it will hopefully be here early november.
i'm thinking of getting a NL12 as well but right now playing it thru my 2x12 mesa or my 1x12 mesa sounds really good.
and it sounds identical. i cannot tell the difference. all the feeling and sustain is there. reacts to my pedals the same. really impressed.
mcnaught custom vdc
i'm thinking of going XiTone Passive 1x12 Wedge