Any ideas?
Posts by spazmatron
-
-
Kiesel Type-X. This guitar is insanely good!!
-
Some of the foot controllers buttons are not as smooth as the others over time. Is it ok to spray electronic cleaner spray on the buttons? Is there another solution. The buttons work but some of them if some of them not all are pressed from the side and not from the top rub against the button
-
-
I must have missed it in the effects section. Ill look for it thanks!
-
Off hand I dont have a recording. I can try and get one tonight. I circled the effect on the pedal here.
It is a chorus type effect.
-
Anyone know how to recreate the detune shallow mode from the old digi-tech whammy pedal?
-
Thanks spazmatron, I forgot about that, i will look at it but i will try to find someone near me with that to try before buy if possible.
For you with the POE you obtain the same result as directly in the back of the Kemper ?
Yes. I couldn't tell a difference. The display is brighter on the kemper too when using a POE.
-
So, I made a ticket for that issue cause some people seems to not have this problem and I got my answer from Kemper:
"Pedals that are connected to the Remote exhibit a greater latency than pedals that are connected directly to the back of the PROFILER due to technical reasons"
I which i knew it before buying it, for that price and what it does i feel a little bit angry and ripped off i must say...
So now I jsut wonder if i buy a 3 long cables for wha/whammy and volume (morph is more ok with latency for me) even i think it's ridiculous and will be pissed off when i'll see those totally useless EXP in...
I'll maybe will stay with my old whammy wha even that not what i wanted.
The good news in that case is that you're not !
Try a POE. I dont notice a lag anymore with a POE to the remote. https://www.amazon.com/TP-LINK…nstruments&sr=1-1-catcorr
-
Try the pedal input on the back of the kemper vs using the foot controller pedal input. If its lagging could be something with the Ethernet cable or signal strength I used a POE and its just like plugging into the back of the kemper. I have not upgraded to the latest BIOS.
-
get a POE injector it will brighten the display on the remote some. https://www.amazon.com/TP-LINK…64579047&s=gateway&sr=8-3
-
Killer profiles!! I bought some DI's from ChopTones and extremely pleased!
-
Try using a POE injector. I haven't had to re-calibrate and dont notice any lag now. They are inexpensive 18$ I think this is the one I use. The remote is brighter now too.
-
Have any of you tried the harley Benton 2x12? Im using a mesa recto 2x12 for live but looking for a cheaper alternative for home jams in the 2x12 format.
-
Hi all.
I have just got the Shure GLXD16. However, I am definitely hearing a change in tone from using a cable. The Shure doesn't sound as full and seems like the top end is harsher. I am also experiencing a strange sound on some high gain profiles (it's like a high pitch after sound if I pick really softly when using a high gain profile). Has anyone else experienced this or can offer advice on how to improve it?
Big thanks in advance.
Check the settings on the receiver. Some allow for active vs passive pickups and have db+ - etc
-
On the thoman site the last picture makes it look like it comes with mounting brackets and extenders for the antennas.
https://www.thomann.de/gb/shure_glxd_re4.htm You could then mount them on the front or the other side of the rack on the back.
-
I have the glxd-14 mounted in a 4u skb roto rack. It fits with tons of room in the back of the rack velcroed toward the edge of the back. The shure GLX wireless units are flawless you cant go wrong! I bought an extra battery so it can charge while I use the other battery for live.
-
Went from an old mesa 4x12 with C90's to a Mesa recto 2x12 w/v30's Havent looked back!!
-
I'm blown away by this guitar. ESP LTD Arrow 1000 with the Floyd 1000SE. Upgraded springs and trem stopper from futone.com
Case is ginormus.
-
But why not provide the option? The earlier releases of Kemper OS had a simple one volume setting. If you wanted to dig in deeper to each individual output you would go into settings. Presenting the user with 4+ volume options can be confusing. Especially when you just want to set a volume for live use and have different settings for practice and live stage etc. Instead of 5.5 volume now I need to write down that the main out is at -14.3 for practice and -12.5 for live. I see your point but allot of us on here feel the same. Just my two cents. I'll shut up now. Im not the one that has to write the code