Posts by chrismilne

    On my pc, if i turn the kemper off, leave rig manager open, then turn the kemper back on, Rig Manager crashes at least 75% of the time. I didn't flip out about it, but it's definitely an issue i've noticed.

    I've mostly written off buying more profiles (have too many and not enough funds) but i picked up a pack to support you, i know your pain all too well unfortunately. Best wishes to your family, and btw your sound clips of your amps are really good so looking forward to trying it.

    please also check the DLY+REV Routing in the Rig Menu, this parameter has influence of the DLY and REV slot in the signal chain. What happens when you set the FX Loop in the X or Mod Slot?

    This was indeed the problem, it was set to 50%, when i put it to 0% (in the middle) it now sounds as expected. Not sure how that happened, i've never even set up rigs, i mostly only play via Rig Manager and tweaking slightly


    This seems to change with different profiles, is there a global setting for this?

    Thanks for the reply. The tech support and I determined this did not happen when the fx loop is in the MOD slot (didn't try others yet). He gave me the same info as you said "I suspect the Delay/Reverb routing parameter in the rig menu to be the cause. Please try if changing the value of that parameter fixes your issue. ". I will try to check tonight, i have been swamped with work since the last email and haven't had a chance to test it.


    Thank you!

    So this shouldn't be related? I'm thinking i will try a factory reset as i'm not sure what to do. Here is the clip i sent off to support...before/after engaging the stereo loop with one strymon pedal attached (but turned off). Same issue if i connect just my TC Delay


    https://soundcloud.com/chris-m…ut-of-phase-sound/s-7V7Nw


    edit; oh i missed a reply from Kemper Support, they gave me some more things to try out.

    Reposting here, realized I posted to the wrong forum before.


    It seems that something has changed maybe in a recent update, but i'm not sure whats going on. I noticed that some rig's that i marked "favorites" sound terrible (like out of phase mic's). When it was one or two i kind of ignored it and went on to another rig and chalked it up to a bad profile (and me having a bad day). Today it happened again and i decided to troubleshoot. My normal mode of playing is to lock the Delay slot and use that as a stereo loop which i run into some pedals (Strymon Mobius -> TC Electronics Triple Delay -> Source Audio Ventris -> Strymon Flint)...i also locked the reverb slot to off for now. While troubleshooting i noticed if i unplugged the send to my pedals it sounds normal (no out of phase sound). I made sure no pedals are on, then i started unplugging the pedals or only connecting one at a time and it still has the problem with any pedal in line (and off)....what could be going on? It's like a really mild comb filter delay...did they change how the loop works and its introducing the same signal back with a tiny delay?


    Note...i mostly only hear it on higher gain profiles as well...not sure if its in the profile itself's settings??


    Thanks.


    Update: kemper support replied but I am using 100% for the loop value.

    It seems that something has changed maybe in a recent update, but i'm not sure whats going on. I noticed that some rig's that i marked "favorites" sound terrible (like out of phase mic's). When it was one or two i kind of ignored it and went on to another rig and chalked it up to a bad profile (and me having a bad day). Today it happened again and i decided to troubleshoot. My normal mode of playing is to lock the Delay slot and use that as a stereo loop which i run into some pedals (Strymon Mobius -> TC Electronics Triple Delay -> Source Audio Ventris -> Strymon Flint)...i also locked the reverb slot to off for now. While troubleshooting i noticed if i unplugged the send to my pedals it sounds normal (no out of phase sound). I made sure no pedals are on, then i started unplugging the pedals or only connecting one at a time and it still has the problem with any pedal in line (and off)....what could be going on? It's like a really mild comb filter delay...did they change how the loop works and its introducing the same signal back with a tiny delay?


    Note...i mostly only hear it on higher gain profiles as well...not sure if its in the profile itself's settings??


    Thanks.

    Sorry if i missed it, do we know if the 3.0 will include a way to manage/change cabinets in rig manager? Doing that is terrible on the Kemper, especially with purchased IR libraries where the names are super long and you can't even read them after importing.


    Thanks.

    Have you accidentally tripped the USB/MIDI THRU button on the Midisport, by any chance?

    That button doesn't seem to change anything in or out. When i open midi i only see my Presonus Faderport and ventris reverb (both of which are connected via USB), the midisport does not show up at all anymore.


    Should anything be selected in Routing?


    I even tried opening an older version of Toast Me (1.38) and i still don't see it...but its in my DAW and the Device Manager so i'm confused