LOL, was the Camera on a PA Speaker?
The rest of the show came out clear. I don't know what happened to this clip.. but it is annoying to watch, lol.
LOL, was the Camera on a PA Speaker?
The rest of the show came out clear. I don't know what happened to this clip.. but it is annoying to watch, lol.
It depends whether you want to use Imprints or Full Range through the Kabinet. The Cabinet block should NOT be turned off though as this goes to FOH but Monitor Cab Off determines the signal going to the Kabinet.
This is some of the best advice I have gotten on here, thank you!
Is Full range seperate from Kemper Kone?
It seems when I have the cabinet off via the Kabinet, it sounds more legit to my ears.
Can you elaborate on Imprints or Full Range?
Look forward to reading about the experience!
Here's a clip from the Saturday show. You can see the Kemper in the back
https://www.icloud.com/photos/#0AvZArFu9hp4SmTpWOqAh-BhA
Do you guys turn Cabinet OFF when using your Kemper through the Kabinet?
Nope, the other way around: Kone must be checked, Cab Off as well (that affects only the Monitor Out)
Should "Main Out Link" be checked?
Should "Main Out Link" be checked?
Sorry, I'm traveling for the next 10 days (no need to pay, btw)
I understand. I have a gig tonight, the reassurance would certainly be worth it.
Thanks. Do you live in Keller, TX?
Can I pay you $20 to do a quick 1-2 minute video going through the suggested settings for output section settings, volumes, ect?
Nope, the other way around: Kone must be checked, Cab Off as well (that affects only the Monitor Out)
Thanks. Do you live in Keller, TX?
Regarding ideal setup for soundguy...
1. What is a good level for Main Volume in Output section?
2. What is a good level for Master Volume?
Not if you want to use the imprints, as I think you‘ve mentioned. Look at what Howard posted above me. Check out the manual or tutorials on youtube. You want to turn the cab off for the Kabinet but not for FOH.
Ok, I "unchecked" the Kemper Kone in the Output section. This is good, correct?
1. That the PROFILER's output is pretty hot and that you can attenuate it (-12dB is an often quoted value) if necessary
2. ask the FOH mixer if you will go mono or stereo over the PA (chances are: mono) - set the Main Outs to Master stereo or Master mono accordingly3. make sure that the MASTER VOLUME on the PROFILER is not linked to the Main Outs (your feed to the PA), but to the Monitor Volume. This way you can just use the MASTER VOLUME knob as you would on a traditional amp, without worrying about the level to FOH
Should I bring an extra long cable?
XLR or 1/4 guitar cable?
Should I run XLR or 1/4 guitar cable to PA?
1. In the output section. Press the output button and scroll through the menu. There are options to link and unlink volumes with the master volume. (Monitor volume, headphone volume etc.). Or: In rig manager there are boxes to check or uncheck linked volumes in the output section.
2. Speaker imprints never go to the PA. They only work in your Kabinet. If you turn CAB OFF in the output section, the cab f the profile will still be sent to FOH but not to your Kabinet. Make sure to turn the cab off in the output section only, i.e. don‘t turn the cab off entirely with the button next to AMP and EQ.
3. Use it like a real amp, pointing slightly away from you so you‘re not in the beam.
I'm using a Kabinet, so I assume I want CAB ON. correct?
I found the -12dB check and set it to mono. It's good to go
1. Where do I find the MASTER VOLUME settings to make sure it's not linked to the Main Outs?
2. Do I need to worry about bypassing the Speaker imprints when going through the PA?
2. Should I face the Kemper towards me as if it's my monitor?
1. That the PROFILER's output is pretty hot and that you can attenuate it (-12dB is an often quoted value) if necessary
2. ask the FOH mixer if you will go mono or stereo over the PA (chances are: mono) - set the Main Outs to Master stereo or Master mono accordingly3. make sure that the MASTER VOLUME on the PROFILER is not linked to the Main Outs (your feed to the PA), but to the Monitor Volume. This way you can just use the MASTER VOLUME knob as you would on a traditional amp, without worrying about the level to FOH
Advice from an expert. Thank you!
I'm exicted.
I will be using the Kemper toaster head and Kabinet with a live band this weekend.
I'll be using M Britt profiles.
1. What should I tell the sound guy?
2. Is there a setting I should be using when going into FOH?
3. Will I be able to use my Kabinet as a monitor? Will it be loud enough?
Anything else I need to know?