Posts by Hebue62

    Auxiliary Input

    The Auxiliary Input function allows you to feed a stereo signal, such as an mp3-player, into your PROFILER to play along with it. In the Output Section, the Auxiliary Input function is equipped with three mix controls: one to feed the aux signal to the MAIN OUTPUT as well as S/PDIF OUTPUT, and two others to feed it to the MONITOR OUTPUT and HEADPHONE output. This allows you, for instance, to add an additional monitor signal to your HEADPHONE output, while the MAIN OUTPUT stays unaffected.

    This hint is for all PROFILER variants other than Stage: With the activation of “Monitor Stereo” MONITOR OUTPUT and DIRECT OUTPUT get paired as one logical stereo monitor output. The Aux In signal will also appear on both and its mix gets controlled via “Aux In >Monitor”. The auxiliary signal will not be affected by any internal effects.

    You will need to purchase a special cable which provides the stereo signal via two separate TS jacks. Plug the left jack into the RETURN (RETURN 1 of PROFILER Stage) and the right jack into the ALTERNATIVE INPUT (RETURN 2 of PROFILER Stage). Use the "Aux In >..." soft knobs to adjust the level.

    The PROFILER Stage allows you to use Aux In along with one mono or stereo effect loop.

    For all other PROFILER variants, the Auxiliary Input cannot be used while you have an Effect Loop active in your Rig, or while you are in PROFILER Mode, as the physical inputs are needed for a different purpose.

    Auxiliary Input

    Die Funktion „Auxiliary Input“ erlaubt es, ein Stereo-Signal z. B. von einem MP3-Player zuzuspielen und dieses mit dem Instrument zu begleiten. In der Output-Sektion finden Sie dazu drei Soft-Regler. Mit dem einen können Sie das Aux In-Signal in die MAIN OUTPUT und den S/PDIF OUTPUT mischen. Mit dem zweiten mixen Sie es in den MONITOR OUTPUT und mit einem dritten in den HEADPHONE OUTPUT. Auf diese Weise können Sie z. B. in den HEADPHONE OUTPUT ein zusätzliches Monitor-Signal mischen, welches nicht in den MAIN OUTPUT erscheint. Der folgende Hinweis betrifft alle PROFILER-Modelle außer Stage: Falls MONITOR OUTPUT und DIRECT OUTPUT zu einem Stereo-Monitorausgang verkoppelt sind, ist auch das Aux In-Signal auf beiden Seiten in Stereo zu hören und wird mittels „Aux In >Monitor“ geregelt. Das Aux In-Signal wird von keinerlei internen Effekten beeinflusst.