Posts by iNate2391

    Long story short, I was playing a gig at a casino when all of the sudden my stool broke causing me to fall into my kemper and damage the screen, now only half of it works. They understand that they're at full fault for this and they're wanting to pay to repair my kemper. Now, they are wanting to know how much it will be including shipping. I need this amp because I'm booked for the rest of the year. They're going to pay for quick shipping and all of that. I just need to know what to do. I don't know if any there is any damage other than the screen. The Kemper still works but it's impossible to see what I am doing because again, the screen doesn't work. I am stuck to whatever is programmed into my FCB1010. Maybe I can get a full refurbish? I am located in North Carolina in the United States. Also, I have already emailed support and have gotten no response. Thanks for any advice guys!

    So I figured out how to assign different rigs. I think the main thing I'm having trouble doing now is taking a rig that already has delay and other effects on it and making it dry so I can add my own footswitchable delay and other effects

    Wasn't sure where to post this exactly, so feel free to move it. I just got an FCB wih the Uno4kemper chip, I'm needing a little help setting it up. Basically I just need to be able to have one row for different amps, the other for overdrive, delay, etc. I've read the manual but it's it only shows how to make the bottom row your stomp boxes and the top row effects I think? If anyone can take a little time to help me thay would be awesome! Also, if a profile comes with delay already added to it, how do I remove that delay, so that I can add my own with tha FCB If if that makes sense?

    Thanks for the info guys! The only thing is that I need get delivered and need to be familiar with it before April 7th, and since its coming from overseas directly from them, I'm not sure if I'll have the time. If you guys had to choose, honestly, would you get the remote or the FCB?

    I was originally looking for a Kemper remote but it's a little out of my price range at the moment. I have a big show coming up on April 7th and I need an FCB1010 to be able to use my Kemper for it! I didn't delete the other thread about a remote because people were posting on it so I just started this one. Let me know what you guys have!


    Thanks!

    Finally ready to buy a Kemper. Let me know what you got for sale! Looking for a toaster but will consider a rack. Peferably unpowered but will also consider powered for the right price. Also, if you have an FCB with uno4kemper/Eureka, or a Kemper foot controller that you would bundle with the amp, let me know!

    Appreciate all the information guys! Just so I know for sure, it is okay to use a powered Kemper with a powered speaker, correct? And the band Im with right now is playing the country rock thing. Normal stage stuff. Drummer, a couple guitars on opposite sides of the stage, bass, and a singer. I usually have one side of the stage to myself. Right now I have my cab behind me so I can hear. Also, I know a lot of people who use the FCB midi board. Im assuming thats enough to switch between profiles and turn effects on/off during a show? Also, how does the kemper do when you run effects infant of it? I have a share wireless system thats also a tuner that I run infront of my amp now. I know that the Kemper has an effects loop, but I was just curious about running it in front if I wanted to.

    Whats up guys? In a few weeks I am going to be getting a Kemper. FINALLY!!!!!!!!!!! While I think I know how I'll be running everything I just want to ask for some advice. So realistically I will be getting an unpowered unit, and be using a EV ELX112 powered speaker (I have two of these if I want to use two) as a stage monitor/cab to hear myself, and probably an FCB controller to switch between patches and turn effects on/off. I play out almost every weekend, and have a strong possibility that Ill be touring soon. 95% of the time my amp is miced so but I'm guessing with the KPA I will just run to FOH. My question is, will this be sufficient for live use? Also if by some chance I get a PowerHead or PowerRack, can I still use it with a powered speaker like I already have? Last question, is that if you had the choice, would you use a Powerheard/Rack through a cab of your choice, or would you use an unpowered unit through a powered speaker like the one I have? I know that Atomic, Mission, etc make great FRFR powered cabs, but they're a little out of my budget for now. Thanks again guys!!

    I wish I was able to rent one but unfortunately that's not an option for me. There's just nowhere close to western North Carolina that has one I don't think. I'm hesitant because I don't have a cab/power amp or monitor. I do have a PA with active speakers though that could possibly work. If I decide to get it, I'm basically stuck with it for awhile.