removed by mod
Posts by Roeffel
-
-
Hey , ich habe meine abgeschraubt und erzatzt durch längere , die gummifisse sind noch immer dar !
Raf
-
On the kemper , using different browse levels for rigs and fx
Some input and exit level meters to see if the signal is too hot
...
-
I think it's weird as well ,however since I work with performances it makes sense to push the "first" button to go to the next performance ...
Raf
-
I stepped away from the 4U case , now I have a 10U caster flightcase , with kemper , 1U powersupply , 1U panel to keep distance from the kemper and one 3U rackdrawer , I mounted the G50 on top op the drawer since there was still a 2U space left.
I did manage to mount it in the 4H case : used a 1U blank panel , with Velcro sticked the relay horizontal on it (antennas facing up) ...
Only thing I had to watch is the space for mounting jacks,USB,ethernet ... not that much room with a shallow rack case. I had to reposition some connections due to getting some relief on the cables that connect to the kemper
I'll see if I have pics of the 4U case ... in the pictures topic you'll see my current setup
I decided to use a 10U case so I could put my atomic clr wedge on top of it ...
Raf
-
I can't do it with less I'm afraid, I do the bass + guitar & sample player duties. Check it: WiPe
I watched the YT vids , like the sound , voice not that much though ...
-
-
I couldn't be happier myself , an editor , which possible will be surfacing one-day ( cause the IT job request at the moment for kemper) would let me experiment more to search for other nuances in my sound ... but that's about it !
Let's face it , if kemper would have come up with new devices we 'd be pissed because we don't own the latest versionAfter all these years , keep improving a product that didn't need improvement at all is great !
Kemper cured my gas , which didn't keep me for lurking for other things that come out. Once you know you've got the best unit on the market we can settle ... Besides some changes in front panels , UI , ... it cannot get any better then this. All amps have been profiled , every genre is covered which is marvelous !
I can't thank Mr kemper and this forum enough for this , seriously !
The only thing that I miss is a perfect FRFR kemper made CAB/monitor with the quality that we all know !
Raf
-
Maybe another way around is to use the "morphing" state of a rig , so in case of pushing the button you also activate the morphing feature (even with the slightest possible change) , then the upper row of leds will be lit and you could distinguish the active rig that way !
Raf
-
You can scroll through the cabs that are saved on your Kemper. You cannot scroll through the cabs from Rig Manager / Rig Exchange. You can use From Rigs or From Presets option available under 1st and 2nd soft button over LCD display of Kemper, after you longpress CAB button.
Great , didn't know that !
So no fearure request
Raf
-
-
It's indeed heavy , one thing I don't like for the moment that with both lids mounted the size increases a lot (so does the weight) ... I'll probably leave the back lit at home so my trunk can fit the clr as well !
with both lids mounted I'm not able to put both in the trunk !
I do like the height of the clr , the handy 3U drawer with all cables and the line6 relay on top ...
Raf
-
Hi guys , I was struggling a bit since I bought a passive CLR wedge ...
I went thru all options to see how I could get the most efficient setup possible ...
My concerns where to place my 4U SKb rack somewhere and lift the CLR while used as backline ...
I tried the quiklok BS625 but I didn't like how it was placed on the ampholder ...
Next thing that crossed my mind was a trunk flightcase that could be used to lift the CLR from the ground and the SKB rack on top of it ...
Then I realised I always needed to get the CLR out of its crate and put the rack on top , a hat flightcase didn't seem handy as well ...
Therefore went with this solution : 10U rack , casters , 3U rackdrawer (with Line 6 relay G50 on top) , and put the CLR on top (probably with some foam to reduce the vibrations?)
It 's not the lightweight solution but its mho the most efficient way of getting setup ...
Let me know what you think !
Pics inside !
Raf
-
i sold my diezel 212 cab last week because i wanted full benefit of the kemper. I noticed that all nuances vanished with a regular cab. Thru headphones the profiles sounded much different from each other. I wanted to hear that as well! Now use a passive clr and i'm really happy. I hear myself much better , other bandmembers as well. This at much lower volumes (wedge)
Raf
-
all the best wishes for 2018 !
-
It would be nice to add an effect similar to the digitech freqout pedal
Raf
-
happy xmass from belgium !
-
I got this quicklok BS625 but don't really like how it turned out ... see attachment
Now I'm thinking of getting a 10U flightcase and put the wedge on top ...
Somebody did this ? Was thinking of SKB roto rack or maybe something from the GIG rig series
Raf
-
I've used this setup for over 4 yrs and it works well. Need to tighten the wobbly top when I got it though
I don't like it how the wedge is placed , the rackcase is sitting really nice (indeed after tightning)
Wonder if a small box or stand and rotate the clr would be better and put the case just on top of it ?
Or does a very low speaker stand excists to mount the clr and the case on top of this ?
Any pics how yours is setup ? also wedge clr ?
thx
Raf
-