hello,

i had to reset my laptop.

Everything is deleted.

Can i install the latest version of rigmanager know ?

My profiler's os is somewhere about ~ 8.1.

Sorry& again.

Hi Marco,

if using rack and remote live with an AP, the remote has to be connectet to port 2 of the tp- link , while the tablet gets wifi from the connected vonet- repeater?

rock on,

andy

Quote from marco

It will if you use a PoE switch first into the back of the Kemper network port, as you’re just multiplying the available ports. The switch , being PoE, would power the router

You could use a TP-Link TL-SF1005P and a Vonets VAP1G-300 to keeps things small and neat. A guy on Youtube is using a Buffalo WLI-UTX-AG300, which is no bigger than a cigarette lighter

Hi Marco,

so using both, rack and remote, the remote goes in port 2 of the tp- link ?

Display More

Hi Allenhuish,

i still do not understand from where the AP will get the editor datas in a live situation.

There has to be an internet router on stage ?

please help,- thanx...

Quote from Allenhuish

Hi there,

I would like to start a thread that is limited to *only* what hardware has been found to work or should work to allow wireless to be added to our legacy devices.

I did a video with an explanation...

External Content youtu.be

Content embedded from external sources will not be displayed without your consent.

Display all external content

Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.

If you don't want to read the whole thread here are some devices that work:

Vogels/Vonet wifi access point Amazon UK - https://amzn.to/3dmKNFU

Amazon US - https://amzn.to/36aq04t

TP-Link Switch with Power

Amazon UK - https://amzn.to/36aqpnv

Amazon US - https://amzn.to/3h1QuLI

Power adapter to use one cable for kemper and router

Amazon UK - https://amzn.to/3qsyTj4

The manual is not 100% clear so I will try to summarise my findings so far and what I have seen on this forum. I will also attempt to make it as simple as possible for those of us who are not that technically minded.

The Kemper needs to be connected to a device called a 'router' which is wifi enabled. This wifi router also needs to be able to function as an 'access point' if you want to run it stand-alone (at a gig) without another network (e.g. your home wifi network). As the manual says, this router needs to be connected via the ethernet socket on the back of the kemper. (easily bought on amazon, but see below)

The remote also needs to be connected to that socket so you have to connect the wire from the remote to a socket on the router. However, (and this is important), the remote needs to be powered. It receives its power from the kemper through the ethernet socket normally so you have to find a way to add power to the cable that goes to the remote. This can be done via a POE (power over ethernet) injector (easily bought on amazon).

So, if you do it like this you will have 2 boxes (one router and one poe injector) which both need a power supply plugged in somewhere. You will then need a short cable to go from kemper to router, then another cable from router to poe injector and then a long cable from poe injector to the remote.

If you are like me then you will want to reduce the number of cables and power supplies that you have to lug around and this is where it gets interesting.

There are such things as routers that are powered by POE, so that has the potential to lose one power supply (because the router doesn't need a power supply if it's powered from the kemper from the ethernet cable). Many of these routers are designed for home networking where things are wired into small spaces so they are probably small enough to go in the back of the kemper.

There are also routers which will do POE 'pass through'. In other words it will take the power coming in from the kemper and then pass it on to the cable going out to the remote. The first issue is that the router needs 2 ethernet sockets. Many small wifi routers powered by POE do not, but a small number do.

However, then we get into the issues of how much power and how is it delivered. In this case, there are multiple standards of how this is done (802.3af, etc.) and I have not seen confirmation from kemper on what standard we need to follow (it says 'mode a' in the manual, but this is not quite enough information I believe). Supported are IEEE standard 802.3af-2003 as well as 802.3at-2009 mode A. There is also a lack of documentation from router companies about the detail of what they need coming and out of their power supplies.

In a perfect world, we could find a device which will be powered over POE and will pass-through POE to the remote. If this was the case, then legacy owners could buy one box, with no power supply and tuck it into the back of the kemper and have it all in one with no additional power supplies etc.

So coming back to the point of this thread. Please post the products (preferably with a web link) that you have found that we can try or research to be able to achieve this goal. I will shortly add some that I have found. Please don't clutter up the thread with comments such as 'I'm confused' or 'why not android' etc. those comments can go in plenty of other threads.

Display More

Quote from Burkhard

Der Link führt zu einem Stereo-Volumenpedal!? Das ist kein Expression-Pedal.

Das richtige Expression-Pedal heißt LFX-1 und das sollte funktionieren. Eigentlich funktioniert am PROFILER jedes Expression-Pedal. Selbst die Yamaha-Pedal mit anderer Polung funktionieren, weil man ja am PROFILER Pedal Type 2 auswählen kann.

Hi Burkhard, war ja ein falscher link von docrock, hier geht es zum cheapo Expression pedal lead lfx: https://www.thomann.de/de/lead_foot_lfx1.htm

Quote from DocRock5150

Hi, kann mir jemand sagen, ob das billige Leadfoot LFV-2 von Thomann als Expression-Pedal an der Remote funktioniert? Ich habe das hier, kriege es aber nicht ans laufen. https://www.thomann.de/de/lead_foot_lfv2.htm

es gibt das pedal für'n gleichen preis als expression pedal !

Wie kann ich ein Zitat/Beitrag aus meinen Posts löschen ?

hi, do i habe to install the Unit beneath the Kemper Plug a cable from Kemper to the Units Input and from there i Chose one of the Outputs going via another cable into my Remote ?

greets & rock on !

Quote from DanFran

I bought this one and it works perfect...

Quote from Kulle_Wumpenteich

Heftig. Wegen so einer verkackten 20 Cent-Buchse. Da kann man schon porös werden. Solche Sachen nehmen mich auch immer ziemlich mit, weil man eher den Fehler bei sich erst mal sucht.
Habe sowas mit meinem Wagen gerade durch. Zwei Batterien haben hinter einander den Muskel zugemacht. Mir ist noch nie eine Batterie kaputt gegangen. Da sucht man wochenlang den Fehler was los ist...

Ja, kann ich auch zustimmen, und gerade als Neu- User ist man schnell aufm "was is'n hier los"- Modus.

Hello there,

i've got a Kemper - rack version - with OS 5.1.0 installed, my rig manager is version 2.0.17.

How do i get the latest versions of both, O.S. and rig manager , into my Kemper, can i update directly ?

Thanx a lot...

Hello, have a nice time with your new multi feature monster

I can search in rigexchange whatever i want too, the answer is always "no rigs found".
For example, when i search for "Michael Britt" !All 4 items are linked (author,rig name etc.) !

> FILTER

Rig Name
Amplifier
Cabinet
Author

No Rigs found
----
Who can help ?

sorry, my mistake. It's been the volume pot itself,- should have made a better setup with that guitar...

Hi there,

i am a beginner and the following problem sucks.
When my guitar volume is rolled down with the guitars poti, that causes sound distortion at lowest volumes in several factory rigs, mainly those with lots of effects.
Can anybody please help ?

Hi there,

i am a beginner and the following problem sucks.
When my guitar volume is rolled down with the guitars poti, that causes sound distortion at lowest volumes in several factory rigs, mainly those with lots of effects.
Can anybody please help ?