Interesting. I often stop the wah long enough during solos (if only for 2-3 seconds) to not being able to use @stop.
I use a Mission exp with a toe switch instead.
Interesting. I often stop the wah long enough during solos (if only for 2-3 seconds) to not being able to use @stop.
I use a Mission exp with a toe switch instead.
Yes. If you enable Pitch>Vol it will work as a Volume pedal if no pitch pedal effects are active.
Personally I haven't gotten used to it just yet and often ends up with the volume being less than 100 percent accidently.
Sounds familiar. Please report :). I'll try to find some time to reproduce some bugs too. For now remember to take a backup before messing with performances.
I have to admit, not being the most proficient with the Kemper and already having certain stomps etc locked....I worry slightly about changing that and putting things back correctly....silly I'm sure.
Take a snapshot of your current settings. Easiest way to quickly retrieve stuff. I have set the quick button up to browse snapshots too.
Please file bug reports via the contact form on the Kemper page. It appears the developers are not aware of these bugs so we need to bring it up on the radar.
Would Stomp presets suffice? Hold the Stomp button and press store. Recall with the Browse knob.
Have a look at the rig settings page 2/6. Probably not 100% what you are looking for (not the default), but perhaps good enough?
This was my main amp for many years. Will definitely check it out!
Thanks. Looking forward to trying the Deth one (as well as the others)
is the patch maybe not actually my profile? Im noticing i can still shut off the cabinet and get that nasty di sound or shut of the amp. This shouldn't be possible if i took the profile with an amp and cab together right?
What you obtain is called a Studio profile. Kemper is able to guess where the amp ends and the cab starts. So switching the cab off is still possible.
No - not that particular bug that I found after 2 minutes no.
I have reported both using https://www.kemper-amps.com/contact.
Who is using an email client in 2018 btw
Nikolaj
The disappearing slot can be reproduced but only if you drag and drop a little bit in between. Will file a report as well.
On PC the "Provide rig manager feedback" menu item only opens my browser. No link is loaded. I guess that is another bug - quite ironic.
I have tried to find a reproducible pattern but will try again. I bet if you spend 10 minutes on PC with the profiler connected, reordering, copy pasting, maybe saving on the profiler, renaming performances you stumble upon something. Reproducing is another thing :). But I'll try too as said.
Did a quick 2 minute video and found 1-2 bugs:
At first I do a few sorts which _seem_ to work (haven't checked if the profiler was correctly updated).
Then at 0:25 I copy (notice "copy") "Blow up the outside world" position 5 to 12 after which a sort action triggers a weird redraw and then the original slot 5 performance is missing from the original position (I did not "cut"). It goes directly from 4 to 6.
Then I try to reload RM and after it has reloaded there is an empty spot in slot 5.
Very easy to trigger errors like this. Will store the backup and try again.
If you experience odd behaviour like that in the Rig Manager please use the "provide Rig Manager feedback" option in the help menu to report it. This will help our developers to fix it.
I have tried to find a reproducible pattern but will try again. I bet if you spend 10 minutes on PC with the profiler connected, reordering, copy pasting, maybe saving on the profiler, renaming performances you stumble upon something. Reproducing is another thing :). But I'll try too as said.
Welcome! Since you are into SinMix and DI profiles I would also recommend the EVH 5153 Stealth EL34 from Cililab. The DIs are the best profiles I have tried for my V30 cab.
we do not have any reports from users about effects not being present when a rig or performance is transferred from the Rig Manager to the PROFILER or any changes in rig settings like gain.
True - but sometimes you get the "Crunch" profile instead of the one you meant. This could explain that behavior.
Also in relation to performances RM is full of hard to replicate bugs. I love it for browsing rigs but I don't find it useful for managing performances. Do that on the profiler for now.
Not sure this is even makes sense, but man I have to save a lot during standard use of the profiler.
How about an optional persistent mode where every change is auto-saved? We still have the undo button for those rare fuckups.
Anybody else feel the same way? As an option.
Thanks for updating us with the solution. Glad you got it sorted.