I love me some SLO!
Posts by madmarcus1960
-
-
Jonathan, your profiles are ALWAYS worth the purchase. I have 'em all. I use 2 ASM-12s, and your profiles consistently sound awesome. There are others that sound great, but the level of consistency is what sets you apart for me.
-
Personally, I use fuzz more for the sustain and less for the distortion.
-
I started using outboard drives and haven't found one that doesn't sound better than the on board ones.
Fulldrive 2
Wampler Euphoria
JHS modded EHX Soul Food
Tumnus
old Grey DOD OD250
Keeley Modded TS
Monte Allum modded Boss SD-1
JHS Muffeletta Fuzz
and more, all sound great with profiles with low to mid gain(Britt, Tone Junkie, etc) -
For the last month, I've been using low gain profiles, yours Mike, and some Tone Junkie stuff with several different real pedals up front. A Tumnus, a JHS Soul Food, a Boss SD-1 with a Monte Allum mod kit, an original grey DOD OD250, and an old Keeley triple mod TS from when he was just starting his own pedals. They all some more alive to me than using higher gain profiles or using the on board drives. Some work better with some amps, and some work better with others. That's the fun of finding the right combo and then there's magic.
-
http://friedmanamplification.com/monitors/asm-12
SPECIFICATIONS
- Configuration: 12” 2-Way Active Stage Monitor for use with modelers/profilers
- Assembly: Made in USA using premium worldwide components
- Low Frequency Transducer: Celestion - 12” speaker with 2.5” edge wound voice coil
- High Frequency Transducer: Celestion PETP film compression driver with 1.75” voice coil
- Frequency Range: 50Hz - 20kHz
- Frequency Response: 58Hz -18kHz
- High Frequency Dispersion: 75° conical
- Maximum peak SPL: 129dB
- Power Output: LF: 270Wrms Class G / HF: 80Wrms Class AB+B
- Maximum total burst power*: 500W
- Input Impedance: 20k Ohm Balanced / 10k Ohm Unbalanced
- Electronic Crossover: 4th order
- Low Cut Filer (switchable): 3rd order Butterworth @ 100Hz
- Controls: Level knob , Low-cut filter switch, Ground lift switch
- Power switch, AC fuse, 115/230V switch Indicators Power Power, Protect, Limit, Signal
- Cooling: Convection
- Amplifier Protection: Short circuit, Clip-limiter, Overheat mute
- SOA output stage, Driver DC protection
- Subsonic filter, Turn-on mute and soft ramp
- Turn-on inrush current limiting
- Power Consumption @: 1.7A/0.85A 115Vac/230Vac
- (1/8 power pink noise): 150VA
- Connectors: Balanced female XLR input / Balanced male XLR link output
- Input Sensitivity **: 775mV (0dBu)
- Enclosure: Black Warnex® painted, Baltic birch plywood construction
- Hardware: Strap handle, Rubber feet / Rubber Strips
- Pole mounting cup, Detachable black grille
- Dimensions: 26.5” H x 16.5” W x 16” D
- Weight: 52 lbs.
-
Can you throw a dog a bone and let us sample a profile or 2? I've help fund your equipment collection since i bought a Kemper.
-
As an FYI, I own 2 ASM-12, they're big and heavy, but they don't leave my house. Freidman announced an ASM-10 at NAMM that will be 15 lbs lighter with the same amp as the bigger one.
-
Haha, if you've got G.A.S. it inevitably leads to having S.H.I.T. (Stockpiling Hella Instrument Technologies)
Amen, AAAAAAmen, Amen , Amen!
-
I'd probably stand in line for your profiles, in the cold, like all those fanboys waiting for the next Iphone 1,000.000,
-
Jon, will the discount cover the Match C-30 as well?
Thanks -
I struggled with the SD P-Rails until I installed them with the Tripleshot rings in a 1989 Hohner Professional SE-35 ES335 copy, great pickups for a semi-hollow body. Great guitar by the way, I own a L90 Hohner '56 Goldtop Les Paul P90 copy that I rebuilt after buying the body only on FleaBay. They are sleeper quality guitars that I paid no more than $300 US for.
-
Boss MS-3 to use with my backup setup
-
Mick, I have a bunch of your stuff, paid and free. You, my friend, produce some of the most lively profiles. I run my Kemper through 2 Freidman ASM-12s, that can sound a little dark to some people, I love'm. Your Mesa and Marshall stuff, just screams through them. Keep it coming in 2018!!
-
Tone Junkie Fo Sho!!, best sparkle out of all the Fenderish profiles I've tried.
-
Great pack Rook, I just spent 30 minutes briefly going through the TriAxis set with my Highway 1 Strat. Very, very chewy tones. The cleans are beautiful as well. Thanks for being a generous business man, you know how to nurture loyalty.
Can't wait to see what else you come up with.
-
"Profile GAS is real...It might be 0s and 1s but the gas pain is there and the symptom of money leaving your pocket is even harder to take."
Dude your profiles make it easier to deal. Lotta stuff out there that I won't mention, that just doesn't cut it. Never been disappointed in anything you served up.HaPpY NeW yEaR!!
-
Jon, there is some outstanding stuff in Pack#3. I just spent 1.5 playing through the low to mid gain profiles of every amp in the pack. Love the Bad Kitty, Nigel (2+ and 3+ especially), Match Light, and the Tall Weeds. I just swapped in a set of SD Slash Alnico2's into this kind of obscure US Masters Flying Vee(smaller V than a Gibby) and these profiles sounded phenomenal on each of the 3 pickup settings.
You have some Mojo going on with the way you profile that my setup(Kempe into 2 Freidman ASM-12s) loves.
-
Thanks for the present Jon. Happy holidayz and have a happy and healthy new year. Your profiles are alway at the top of my list to get.
-
Hey, I wanted to thank you for breaking those up for us. Hope you had a great holiday and have a happy and healthy new year.